Tacos in St. Louis area

17" fj steelies with spacers

 

I've got 16 inch so thats why I am thinking the 13WE's. But it might wait until april since my Valucraft battery bit the dust.

 

I have a ton of room with the 17, If your close to columbia, swing by and we can throw one of your wheels on it and see if it works for you.

 

16in SCS F5s work, used to be a thread on t4r that had a bunch of 16in wheels that worked with the 231

 

I have seen that. I'm not sure if mine will work. I bought them last month from someone at mod day. I do know they come from discount tire. I hear you also weld on sliders. I will be hitting you up sometime this spring if thats something you could do?

 

Wow I’m an idiot, for some reason I was thinking I have never met you and completely forgot that you bought those wheels. It might be more work than you are wanting but you could always get the calipers and test fit one to check clearence and if it doesn’t fit just go back and get the smaller one, or buy both sets up front. IMO I’d rather just get the bigger set since you are already going through all the trouble.

 

If I ever get my hubs I'll let you test fit on mine. I have all the parts (except hubs) to do a bunch of work. Including the bigger brakes. I'm a little pissed off right now about the hubs. Bought them through JerseyHubs on TW over a month ago and he is MIA now. Several people are in the same boat.

 

What do you guys like for batteries? I don't really see myself doing a dual battery set-up but would like something descent. I was thinking about getting an oddysey.

 

I like and use Oddysey batteries. I’ve heard from trusted sources that Northstar brand has a good battery as well.

 

Here they are. These are less than 2 weeks old. I’d like to just sell them because I’m very happy with where the 884’s put me, I want to give the stl folks a chance to get them before anybody else. OME 886’s with some scratches from the ground during compression. I’d like to get $80 for them which is well below half. Holla!

P.s. these are the most insane coils to compress. You’ve been warned if you do it with an Autoparts spring compressor.

 

I’ll take them!!

 

Pm me we can work out a time to meet up

 

Bring them over and use the wall mounted compressor.

 

Will do G.T. thank you

 

If I had a 3rd gen, this is the bumper I’d be running.



Made by Shawn Miller, Spring, Texas.

http://milleroffroaddesign.com/

 

Pretty new to town and looking to do some weekend get aways.
A little bit of camping and off-roading.

Any suggestions? or do you guys do some trips as a group?

 

For camping, I like the facilities at Council Bluff Lake down near Potosi. It's in the middle of Mark Twain NF, so I am sure you can find some forest roads to explore, although I haven't done any wheeling there. I've just gone to camp and ride the MTB trails. It's a beautiful area.

 

Ohhh that is a purty one.

bountiful places to go just a bit down south in the Ozarks. Look up driveable areas of mark train Forrest. Handful of dedicated offroad parks. And plenty of beautiful state parks and wildlife areas to visit.

Echo bluff is the newest and pretty beautiful state park I would suggest. Pretty close to flat nasty offroad parktoo.

 

Rachael freaked out about our storage solution in the kitchen, or should I say, the lack there of. Quick trip to Ikea and I’m the hero again for about fifteen minutes.

 

Lol, I spent about $400 the other night at IKEA, I was only the Hero after I put that crap together.