What Have You Done To Your 3rd Gen Today?

Ordered one of these.............Alucab!

I will be selling my Undercover Ridgelander.

https://www.undercoverinfo.com/i-30...d-undercover-ridgelander-truck-bed-cover.html

 

Installed the @C4 Fabrication bumper yesterday. Turned out so good

 

LOOKS GREAT! I believe this will be the bumper I choose to go with. Really like the profile and not having to cut. If you don’t mind, how much was it total?

 

Here is a better picture of the decal I put on last night. Can't wait to install my suspension, new wheels, and 285/75R16 Toyo tires!

 

A 3" lift? ?

 

I like it..........Unique!

 

I had to return my Revolver X2 due to poor fitment and horrible leaking issues. I went with the Extang Solid Fold 2.0. I definitely like the Bak much better; as I had used it without any issues on my other trucks, but just didn't work for me on the Tacoma.

 

Thanks!

 

Sorry to hear that. The only leaking I have been getting is along the corners of the bed and that isn’t anything that could be fixed by a tonneau. Glad you are liking the Extang. It was high in my list as well.

 

Swapped out the husky xact resin stickers for TRD Pros. Thanks @CBoy808!

Before


After

 

There are other foam pads on the rails. When I siliconed all mine they were completely deteriated. Water was all just pouring in from there. Seal it up good

 

Allied Twins

 

Mounted my vintage emblem where the V6 emblem was.

 

WARNING ABOUT HIKARI 12K LED BULBS FOR HIGH BEAM HEADLIGHTS
They are not assembled with the correct orientation to work in our housings. When installed, rotated and locked in position the led's do not face at 3 and 9 o'clock. Driver side off by 11 degrees. Passenger side off by 35 degrees. Worked fine and correct orientation in low beam housings. They are not adjustable. I did find a simple fix that aligned the passenger side. Driver side ok as is. Simply remove the 2 screws as shown and slide off the plastic collar. Drill new hole or holes-I only used 1 screw-and put screw in the new hole. A minor adjustment to have a great high beam.

 

I ordered one but it was literally from Toyota so it had a place to screw into the vehicle. Did you just cut that off and mount it with double sided tape or did you get another version? Thanks.

 

No, I bought the one you have as I thought it was flat. I bought one from http://www.bh3dprinting.com/product/aluminum-retro-4-wheel-drive-badge/ and then I painted it with bedliner spray so it was all black. It is aluminum and mounts with double sided tape.

 

Uhhhhh. I already have one but I think I like the red better. Time to upgrade I think.

https://www.tacomaworld.com/threads/mobtown-offroad-hi-lift-adapter.536861/#post-17294250

 

We killed the steel cap, they didnt move ever. Back to the drawing board and offer a full plate and cap in one with stamped ribs from 1/8" 5052 aluminum.

Here:

http://mobtownoffroad.com/product/2016-tacoma-tailgate-reinforcement-plate/

We still offer just the inner plate both flat and stamped from steel but that with a steel cap made the tailgate too heavy.

 

You got a first batch yellow one. We changed the color to red. The yellow didnt hold up too well. Not terrible, but not as good as the red.

 

Tacoma’s 1st Birthday
29069 miles