Vegas BS Thread!

Also, can anyone recommend a good window tint guy/shop in town?

 

Little windy today out in Sloan

 

Where was that? Mt. Charleston?

 

If you're really quiet, you can hear some heads exploding with that picture. Ahhh... what am I saying, those types don't drive Tacomas and therefore would never be on here...

Do you ever shoot over by speed Vegas area? I saw a truck just like yours pass me getting on the trail as I was getting off of it over there a few months back.

 

I used Precision Window Tint in Henderson. My left side has some crinkling from the edge that had some overlap, they will fix no problem, but honestly I just haven't had the time to go back and get it fixed. They were pretty quick though and price wasn't too bad. I would check them out.

 

Yup. The Lee Canyon side.

 

I finally got a tailgate skin cut for a sample.

These are 1/8" 6061 aluminum waterjetted. They can be installed with the factory hardware. Or the plastic inserts can be removed and replaced with 1/4" x 20 rivnut inserts and you can use whatever hardware you want. There are slight differences between tailgates so some could need very minor work to fit. I have no idea if they would fit a 3rd gen until I get a chance to look at one.

$75. I should have 2 available by the end of the next week.

 

I'll take one.

 

Hit up Lovell Canyon to check out the snow and test out the new Kings.

 

I have two large cans of fix a flat and a 20 gallon tub I won't be flying home with tomorrow. Staying at the Lake Las Vegas Westin, free to whomever wants to come get them either tonight after I get back from Valley of Fire or tomorrow AM. PM for dibs with phone #.

 

Wheeler Pass had minimal snow but maximum speed.

 

I'll let you know as soon as they are cut

 

You beat me to i with pics haha

 

Anyone for skids?
New Pelfreybilt front and mid bare steel for $460

 

I’m not quite Vegas local but visit Nellis every 6 weeks or so from Zion area (booze run. Because... Utah...)

And since I’m new to the area, I’m exploring everything from here to there and in both easterly and westerly sides of the corridor.

 

Anyone planning on going?

Thinking about checking it out.



https://themint400.com/donttrashthedesert/

 

Before I sanded and sprayed


After I sanded and sprayed


I have a pro comp AAL (I believe its a Procomp 1.5in AAL based on research) willing to sell.
I bought it used, I believe 18k miles on it, but I can't find anything on its part number anywhere. Part number is 13129-1, I believe its the same as the 13120 made today by ProComp but again I don't know.
Had the intention of using it but went a different path. When I got it months ago I cleaned it completely off and sanded the little surface rust it had and coated both in a spray able undercoat from rust oleum.
Since it was used and the original owner's leaf pack center bolts were reused, I ordered some from Skyjacker. Never opened those either, still in there little plastic bag.
Looking to get $30 flat since original for the 13120 today is $36 + shipping from Summit which shipped to 89108 (Vegas) is $50 shipped and its $46 shipped from 4wd.com.
Funny thing is neither of the 13130's that I got prices on are stated to work with 05-15 Taco's, this AAL I have must have come from a kit or something previously.
Just looking to get rid of it.
Thanks
I'm in the northwest.

 

Thought you were in YNP?

 

Oddly at this very moment I’m in Grand Canyon NP.

We (husband and I) relocated to Zion NP in January.