Cheap Bumpers on eBay!!

I'm betting that's what they're called. Thanks!

 

Yes those have to be removed for the lower half to fit.

 

Can you elaborate what you did here? I just read this far into this thread to find some pic's of how people beefed up their mounts w/out buying the beefier plates. Looks easy enough to make myself.

 

I just noticed this today, anyone else’s rear bumper like this ? It’s at least 3/4” off on side to side


At least they look good lol.

 

Cut 1/4" plate in the shape of the frame mounts and drill for the bolt holes. Grind backs off factory studs and punch through to remove. Put 1/4" plate on and tighten down with new 1/2" grade 8 hardware. Weld plates and head of bolt (backside of plate). Reinstall bumper and tighten down with the new nuts. Boom, beefier bumper mounts. Also would recommend bolt on wrap around side bumper supports for heavy recoveries

 

How much of a step does that rear bumper provide? I need a new rear but being able to stand on it to access the top of my shell is more important to me than departure angle.

I'd also prefer the hitch below the bumper so I don't have to deal with the license plate.

 

It doesn’t

Look into the Cbi rear

 

Thanks, that's what I was thought when looking at it.

 

What fog lights are you guys using?

 

Got the main section of the bumper and winch installed. Still waiting on fog lights.

 

I don’t have the rear yet

 

It might be because my bed isn’t straight on the frame

 

Found the source of my rattle some how a nut found its way in the lower member an was bouncing don’t know where it came from I didn’t remove it an wasn’t part of the wing hardware.

 

I always end up with some "spare parts"

 

It was frustrating trying to diagnose it I removed the lower half an it bounced off my glasses glad I always wear them. Just need to notch the ac line an I’ll be good an install my way to many lights.

 

I found a handful of graven in my exhaust heat shield a few weeks ago. That rattle was driving me crazy!

 

Shackles are 3/4” right?

 

Yeah

 

Here’s what I ordered to prevent the rattlin

1 Pair Black D-Ring Isolator and 4 Pcs Washers,Shackle Isolator Kit Protect Your Bumper and Reduce Rattling,Fit for Jeep Off-road Vehicle SUV ATV UTV Truck 4WD--AutoSky

$7 1 Pair Black D-Ring Isolator and 4 Pcs Washers,Shackle Isolator Kit Protect Your Bumper and Reduce Rattling,Fit for Jeep Off-road Vehicle SUV ATV UTV Truck 4WD--AutoSky

https://www.amazon.com/dp/B073B368MP/ref=cm_sw_r_cp_api_AeSNAbCH9TJS0

 

Whats your rear lift setup, wheels, tire size? Truck looks incredible