The Lair

I haven't had a rub, but I did have a tick. I tweaked the balance of the squirrel cage and that fixed it for a while, but I ultimately replaced the blower motor.

 

Our young estimator is leaving the team in two weeks, that's a sad new... But, we found a new guy who owns a Tacoma! (3rd gen) but still! Can't wait to have someone on my side when we talk trucks!

 

How about Modtown Offroad.

 

Haha perfect!

 

@EatSleepTacos
https://www.tacomaworld.com/threads/sliders-not-welded-on-right.509661/

 

That’s pretty bad.

 

Looks like they tried 7018'ing it through the paint instead of cleaning the area first. Not the way to do things. You can get away with that with a 10 series rod then run a second 7018 pass over it but why not just take a few minutes and wire wheel the paint off? I try not to be critical of other people's work, you never know the conditions they were in but there is really no excuse for that, it's not even close to completely welded.

 

I can weld better than that.

I gots the coveted internet lessons from @Skell

 

You should come out to the shop, you can play with the welders for a day. I'll show you how to middle america's heli-arc!

 

I want to play with welders

 

Let me know when you're coming!

 

@fatfurious2 someone was asking for ubolt dimensions?

 

@ready6delta

 

Wow wish they had this out sooner....how much needs to come off for 35s? This is what I'm working with now. Think I'm good or should I plan to chop more?

 

Honestly I couldn’t tell you. I was planning to do the insain mount like @inesshell

 

Do you take a notch out of the bottom to clear the busing when you "do the insain mount" @EatSleepTacos?

 

if mount clears 37s stuffed, i honestly dont see a need to drop so much money for a cmc....




however.....i didnt follow IF template, i went and took off more metal.

 

Or you could go get some 3/16 or 1/8 plate and make your own chop plates.