SOLD Readylift Heimed Tie Rods

SOLD - Used Steering Arms in good shape. These have worked great for me over the last 1.5 years. As you can see in the pictures the finish on the actual rod ends isn't the most durable but it hasn't affected performance. I think it is just oxidation on them. The actual heims themselves are in great condition with no squeaking. Fully adjustable and come with clevis adapters for the factory steering rack.

Asking $300 shipped CONUS.

 

Interested. Any clue on the extent of the adjustability? need them for a +2 LT Kit and thinking they won't work but hoping they would. Guessing these are just regular length?

 

They are stock length. You could maybe adjust them long enough to fit a +2” kit but it would leave very little threaded rod in the body and would be weaker

 

Sounds good, kinda figured but was worth a shot. Thanks for the help. GLWS

 

Forgive my ignorance, but this would essentially replace the inner and outer tie rods right?

 

Yes, Clevis adapter goes right onto the steering rack and you replace the two tie rod joints with two heims

 

Any pics installed? Kinda interested but still shakin my head on how these fit onto the steering rack...

 

Mmmmm beefy! Way better than stock

 

Very tempting. Any idea if the heims have more travel then stock tie rods?

 

Probably but tie rods shouldn’t really limit your travel. Other things will mx out before they do. And the steering stops on oem LCAs limit how far you can turn the wheel

 

I must have just seen this. Would you say they are stronger then oem. 37’s are killing the oem tie rods

 

Yes definitely stronger. By a substantial amount

 

Does it have left hand threads and right hand threads so you can leave the heims bolted down and spin the black tube to adjust?

If thats the case, I'm interested

Nevermind, i see its sold. Looking at it more, i'm not even sure they would fit with the RCD spindles.