What Have You Done To Your 3rd Gen Today?

How difficult is it to remove the existing flares?

 

I wouldn't. That screw holds the clip in place to keep the gas door shut.

 

Easy peasy.

 

Is the license plate still visible or will it have to be moved?

 

Finally put on my Spidertrax wheel spacers. Even the wife thought it was worth it!

 

I really want to do those bumper caps- How hard were they to remove

 

A friend has a rack and complains how he can't slide in T-nuts into his bed rail after his rack is installed. So I made a few drop in T-nuts for him and I.

 

Going to have to relocate. Doing that today, hopefully

 

Super easy! Just have 5 little fasteners/clips, lift up on the black top trim portion, and the end caps come off. First time they are held in by a little metal clip but once you take them off the first time it’s super easy.

 

I added a tough padding to the seat backs to keep my gear from sliding around.

 

@Parker315 - Actually, yes. Here's @RobP62 's explanation.

 

Nice work.

 

Anyone have experience with these fender flares? Looked at the bushwhacker flares but $440 is a little steep.

Super Drive For 2016 Toyota Tacoma 60.3" Bed Pocket Riveted Fender Flares Bolt On 4 Pieces Set Black Smooth / Textured Finish (Textured Black)

Super Drive for 2016 Toyota Tacoma 60.3" Bed Pocket Riveted Fender Flares Bolt On 4 Pieces Set Black Smooth/Textured Finish (Textured Black)

https://www.amazon.com/dp/B0716ZHRKN/ref=cm_sw_r_cp_api_rzuPAbJB5W2M5

 

http://www.hondogarage.com/index.php/catalog/2016toyotatacoma

This is the link to all their 3rd Gen products. The mount and the mic holder are there. A little pricey but then again they are made out of metal instead of plastic. Solid.

 

@RobP62 always has such informative detailed posts

 

Only took me like 5 months but I put rrentops wheel cap decals on this morning. Like the look over the red. Will see how long these hold up then maybe eventually paint the letters.

 

Thanks, could be I'm also a little

 

iinstalled my clazzios i removed the front seats thinking it would be easier and i think it was i also wanted to vaccum under the seats i also installed seat heaters but will wire them up later with help it only took 3 hours

 

Looks sharp! I need this in my life. Where did you buy the mat and how did you hold it in place? My trackmat slides back and forth over the plastic seat backs and it's starting to drive me nuts.

 

Also installed a $14.99 LED under hood light