Is this taco lean?

Ok so my truck measures 36.5 from the ground to fender on driver side with a full tank of gas and on passenger side it is 38 inches. Would a .25 top plate spacer make a 1.5 inch difference with ome 2887 coils on 5100s?

 

No, this is @TacoLean

 

Thats not the answer im looking for. Lol

 

lol I know, just saw the opportunity and took it. I cannot answer your actual question, but giving you free bumps for attention!

 

It will bring the corner up a 1/2 inch. I just did a video about that.

https://youtu.be/edavE-00w1Y

 

Thanks.

 

Center hub to fender .when you go to ground you introduce tire variables.

 

23.75 in driver and 25.25 passenger

 

A spacer should give you double the thickness of lift

 

Full tank of gas? Just read first post again. Check it at 1/2 tank and then at 1/4 . Then decide in top plate spacer size. I have 2 extra 1/2 spacers if you need one I'll do it in the cheap .

 

1/4 in lean spacer will fix that. You’ll get 1/2” of lift.

 

This might help determine how much lift you’ll get... also, to fix the taco lean, whatever size block you get, double it and that’s how much lift you’ll get. I wanted a full 3” lift up front, i have the 5100s, got the 885’s and needed a 1/4” bock on the passenger side to get the extra .5” and a 1/2” block on driver side to get a full 1” to compensate for my lean

 

Iv ordered the top plate spacer yesterday. It should arrive wednesday so il check after install and let you know. Didnt expect it to be 2" difference between sides

 

Best advice for the taco lean is learn to love it

 

I have one coming in the mail already. I did these measurements right after i stoped for gas so it may be as extreme as it gets.

 

Lol, my buddy pointed it out to me the other day and now i cant unsee it. Never noticed it but i just did add ome 2887s. Maybe they need to settle first.

 

We're the preloads even?

 

Both shocks were set to the 1st notch.

 

I would drive it for a month or two before adding a spacer.

 

Should it be aligned as is?