3rd gen with larger tires and/or lifted on STOCK WHEELS

thanks! they are 275/70r17 bfg ko2’s

 

Thank you so much for your business @Tyler21 ! ​

 

So I'm installing the lift right now and I've come to installing and adjusting the SPC UCA ball joints. For the guys that are running 285/75's, what setting do you have yours set to? Do you need the full +4.0? Or should I try to aim for stock caster until I actually buy and install my tires?

 

BFG KO2 265/70r17 on stock suspension

 

Here is mine. 285/75’s coming soon.

 

So what's the general consensus on lifting with 265/75/16. Any spacers needed to clear anything? Thanks in advance

 

3" leveling kit with 20"rims.. not sure tire size but all together it is 33"

 

I ran BFG KO2 275/70/16 on the stock wheels and stock suspension for a while. No issues.

 

what stock package do these come on?

 

I can finally add to my own thread!

 

Nice truck! Looks like Stuart Mesa, I'm over at Edson Range.

 

running spacers or UCA?

 

Stock suspension with 285/75/16 BFG KO

A little rubbing up front. Just gotta trim the fender liners.

 

W.O.W. Beautiful truck. Question, do you mean a 1/4" wheel spacer, or a 1/4" shock spacer (aka Tacoma Lean spacer). If its the first, I never knew that they made wheel spacers under 0.750"? Does that spacer have new studs? Link to it? Planning on new tires soon and was going to get 0.750" wheel spacers for the UCA rubbing issues with bigger tires. Thanks

 

Need to get some wheel spacers and I saw that you have some. Am I looking for 6x5.5 bolt pattern? Not sure what that means... Thanks.

 

it was a $10 Autozone universal wheel spacer due to rubbing on the upper control arm to drive around on for the tie being. Once I got home I ordered spidertrax 1.25 spacers installed them as soon as they got in. I did CMC and hammer the pinch weld when I installed the spidertrax just for safe measure.

 

Yep, 6 is the number of lugs we have, and 5.5 is the spacing of the lugs.
http://www.spidertrax.com/Toyota-Hub-Centric-Spacer?sc=2&category=9982

Spidertrax are the most popular brand, but a few other companies make them as well, just be sure they are hub centric.

 

Thank you sir. Looking at Bora because they make .75" which is what I need to match the front end push out from my Maxtrac spindles.

 

Ummm...rubbing?