OEmassive Quad Projector Retrofit

Kinda like being at a strip club, except you get to pick up your dollar bills at the end of the night!

 

Lucky person getting a set of Meso 1 offs. Still like yours better but these are gonna be great

 

Need to update this. Doing some super custom halos (from scratch)...
But in the meantime I think it needs another pair of reflectors...

 

Where is the "buy-it-now" button???

 

Click here:

 

Let me update that for you...

 

hahahhaha

 

oh there it is...

 

as usual @mesojdm

 

Ughh I can’t wait for an update. I’ve been checking the forum mostly to see this thread. @mesojdm

 

First-world problems

 

Yup @Boyk1182

 

Yeah me too!

 

Yeah, that'll get hot real quick lol

 

Ask and ye shall receive.
Beware, lots of pics.


Next thing to address was the Angry Halos. This was the most difficult part. WHY? Because nobody makes square halos
So I did what any sane person would do.. Design and fabricate my own.


These has a lot of details wrapped in them
1)I had to match the conture of the Original bezel so it would all flow toether like OEM. (even the little ribs on the inside)
2)Layout in the back so my LED strips will all fit and disperse light evenly
3)1/8" channel on the outside for my plexiglass

Next, mask off and start cutting


*SNAPS FINGER*
DONE(wish it was that easy)


3D printed for test fitment


I designed a lip on the back to prevent it form falling out forward(will also give me a spot to plastic weld it in)


LED layout



Now for the inside channel... I didn't want it open becasue you would see all the indiviudual LED's. So I CNC'd out a quick jig. Then heated/bent up plexiglass and formed it.


Plexi installed(it was also sanded with 400grit to give the light a nice glow)




But wait, there's more
There is a big flat spot on the inside, so I decided to draw up a matching "3 bar" reflector(like the side ones)



Cut out.


LED channels


It's a combination of 3d printed housings, with CNC'd acrylic inside.


Backside. All wiring done. I will go over all the board with adhesive just to make sure it's in there for good.


Then, all the housings were sanded and painted with Matte krylon. It's my favorite paint as it's not too dull(like flat) and not too shiny(like gloss)


ALL DONE!


Close up of the internals










LIGHT PICS. I Couldn't leave you guys hanging!!!

Off:


Angry halos AKA Dragon eyes. I'm REALLY happy how these turned out. The light hits the plexi internally, then goes straight through into the front which is lightly sanded. I would put these up against any commercially made halo



Still figuring out how everything will be wired. Here's the DRL amber on with dragon eyes





DRL's only


Dual color




Side markers




And the icing on the cake, I couldn't leave the ugly fake fins at the bottom so I made a snap in over panel with my logo and a little design






Last thing to do (other than reseal) is design an extended rear cap to cover the bulb/igniter because these projectors stick a little far out the back than stock.

 

Bonkers. Really completely bonkers. Great job.

 

Dude these are badass!!!! Wow these are so fucking cool


I wish I had the talent and time to do something like this. These are amazing

 

The person getting these will have a great one off set. Amazing quality and attention to detail as usual.

 

Thank you
They definitely tested my design and fab skills... But that's needed once in a while to keep them honed. This was an all out build for sure, Performance and looks. Most people would be happy with a BHLM, but something inside me just cant't do that. Need more light!!!

 

Wait I missed that!! I though that these were just for your truck. Your selling these?? Dayyyyyuuum!!!! I already know I can’t afford them lmao