NCtaco's (formerly RadTaco) 2017 SuperWhite TRD O/R DCSB

Currently:


Exterior:
OEM TRD Pro Grille w/ Matte Black Overlays
Removed V6 badge
Matte Black Emblem Overlays
Matte Black "Tacoma" Tail Gate Inserts
Door Cups PPF (Durasheild Titan)
Removed Dealer Installed Pin Stripes
Removed Bedside Decals
Prinsu Designs Cabrac w/ Tie down rings, Dual Plano Tactical 36", 1x1 Crossbar, Noise Reducing Edge

Interior:
Weather Tech Floor Mats Front/Rear
Drivers Seat Mounted Mag Light
Center Console Divider
In-Cab Mounted Fire Extinguisher
OEM Door Sill Protectors w/ Super White Vinyl Inserts
Super White Glove Box "Tacoma" Vinyl Inserts
Cobra Radar Hardwired w/ Billet Mirror Mount
Suntek Window Tint (fronts, sunroof, full windsheild w/ strip)
Touch Screen Protector
Mob Armor w/ Hondo Garage Vent Mount and Ram Swivel
Mob Armor Mobnetic for Comm
ScanGauge II w/ Window Mount
Tuff skinz Cup Holder Pads (White/Black Combo)

Suspension:
Fox 2.5 Coilovers w/ DSC & Eibach 650lb Sorings
Fox 2.5 Rear Shocks w/ DSC (Tundra Spec)
Icon RXT Leaf Springs
Archive Garage Hammer Hangers w/ Fabbed 4.6" Shackles & Crosstube
Sway Bar Delete
Wheelers U-Bolt Flip Kit
Wheelers Front and Rear Superstops
Wheelers +2" Extended Rear Brake Lines/Front Standard
JBA HD UCA's w/ 1/4" Brake Line Clamps/Moog Zerk Covers/Grade 8 Replaced BJ Hardware
ECGS Diff Bushing
Old Man Emu Drive Line Spacer
TC Sway bar Spindle Gussets
Marlin Crawler Cam Gusset Reinforcements

Wheels/Tires:
SCS Ray 10 17x9
Cooper STT Pro 315/70/17
SCS Extended Lugs
Full Size Matching Bed Mounted Spare w/ 3 Point Speedstrap

Lighting:
LED Fog Lights, Headlights (high/low beams)
LED Reverse/Tag Lights
LED Full Interior (dome, map, and vanity lights)
Baja Desings XL Driving Pattern w/ SDHQ Ditch Light Brackets
Baja Designs Amber Squadron Flood Pattern
Baja Designs Push Button Under Hood Light
Yotamafia Integrated Rock Light Kit w/ KC Cyclones
TRD Pro OEM Taillights
2020 OEM Tacoma LED Headlights w/ Conversion Harness By @xrunnerdude67

Electrical:
Power Trays Mount
Power Trays Custom Length Cables
Blue Sea 100A 12 Postion Fuse Block
Blue Sea 100A Breaker
CH4x4 Compressor and Ditch Light Switches
Blue Sea HD Disconnect For Winch

$338 ARB CKMA12 On-Board Air Compressor High Performance 12 Volt for Air Locker Differentials and Tire Inflation

ARB CKMA12 w/ Expedtion Essentials Bed Mount
N2 Designs Remote Start
MesoJDM Extended Fuse Block Cover
MesoJDM CP6.1 Switch Housing
X2 Power Battery Group 24F
TRD Battery Hold Down By @Coupe
TacoGarage Anytime Front/Rear Camera


Recovery:
Smittybilt 10k Winch w/ Synthetic Rope
Factor 55 Flatlink
Factor 55 Fairlead
Factor 55 Hitchlink
Rear Seat Mounted Foldable Shovel and Axe
ATH Fab Hi Lift Bed Mounts w/ 48" Hi Lift
Hi Lift Large Base
Hi Lift Skider Adapter
Misc. Straps, Shackles, Tree Saver, Winch Line Guard


Misc:
OEM Bed Mat
DIY Locking Cubby Doors (semi weatherproofed)
ADDW1 Oil Catch Can
Diff Breather Mod
Stant Locking Fuel Cap
AC Drip Line Relocated
Gold Magnetic Oil Drain Plug
ATH Bed Stiffener's
MesoJDM Gasshole
Chopped Exhaust w/ OEM Exhaust Tip (Black)
SDHQ ABS Guards
ATH Bed Corner Brackets
Exhaust Crossover Relocate w/ Heat Sheild
Amsoil Signature Series (engine/trans)
Amsoil Severe Gear (diffs/tcase)
Low Profile Rear diff Drain Plug
Energy Suspension Core Support Bushings (

$28 9.4101G UNIVERSAL MOUNT

9.4101G)
Mountain Hatch Tail Gate Replacement
Running 4 Taco's Cab Mount Relocation
Nitro 5.29's Installed By ECGS

Armor:
Mobtown Bolt-on w/ kick out and fill plates
Mobtown IFS Skid (steel)
Mobtown Trans Skid (steel)
Mobtown T-Case Skid (steel, exh. relocate)
Brute force Fab front w/ single hoop and side supports

 

Hey man nice taco! Do you have a link for the build thread to your old taco? I can't seem to find it and I read on another thread that you were running the RCD bilsteins for your BDS lift.

 

Yeah, I did away with it...wanted to start fresh since I've switched trucks for the 4th time. But, yes I ran the RCD Bilsteins w/ Toytec 1.6" coils and top plate spacers to correct lean at one point. Achieved about 7" of lift in the front w/ the BDS DB.

 

Update: 6112/5160 install to be completed. Awaiting final parts to install. Will be running 285 bfg ko2 on stock wheels.

 

6112's installed as of Friday along with the progressive AAL. Installed on 5th notch and as expected I got closer to 2.5"-3" of lift. Alignment #'s still turned out good imo with stock UCA's. Also fit full size spare (285) in factory location without much effort

 

@NCtaco914 Looking good! That 285 looks huge in there haha.
Any modification you need to make with the Wheelers AAL to brackets? Overload?

 

Thanks! Yeah the 285's fit really nice and actually don't have as much trimming to do than I originally thought. On the progressive AAL I did have to cut the oem rear spring keeper to fit the new leafs. I chose to remove the overload leaf and cut off the e brake bracket to the overload leaf. Also used 1/2" spacers to move the e brake line away from the leafs at the frame

 

That spare tire is huge. How in the world did you get that to fit

 

Hammer and a little patience

 

Have you ever had issue with spacers? I do some pretty technical trails with my trucks.

 

I've never had any issues with wheel spacers. Always have ran Spidertrax or Bora. Properly torqued and checked every tire rotation and you'll have no problems

 

Wait, hammer? What did you do to make it fit back there. Killer looking truck.

 

Well a good heavy rubber mallet was kind enough. Just to bend the metal tabs back a little to completely tuck the 285 up against the frame snug. Other than that, just winching up the chain is where it counts. May relocate my exhaust eventually. So far no issues at all and keeps a full size spare out of the bed

 

Truck also impressed me last weekend making my final move. ECT mode of course was essential. Pretty good load for the 3.5

 

UPDATED.

 

How do you like those jba uca’s Will be my next purchase

 

Completely worth it. Best uca's I've ever had so far. Fit and finish is great, maintenance is minimal, and they actually benefit you (alignment is correct, extra wheel travel). Best handling Tacoma I've had so far and I really feel like it's all because of the jba's

 

Awesome man yea I have looked at all the uniball set ups but I love how jba uses a bolt on ball joint makes way more sense thanks for the insight be ordering them tonight

 

killer truck btw very tasteful

 

Those 285's look so mean. Been wanting to run 285's on stock OR rims so I don't have to buy new ones. How much trimming did you have to do? I'm on aftermarket UCA's and similar lift height.