Coverking seat covers

Anyone tried these seat covers ? Looking to get some and saw some good reviews on these https://www.coverking.com/seat-covers/custom-seat-covers.html

 

Yes if you run a search should find plenty of feedback.

 

Love them - I have the Genuine Neoprene. Good temperature regulation, waterproof, and easy to wipe down with some basic wetsuit cleaner. I do a lot of water sports and sports in general so I'm often getting into my truck wet or sweaty and these preserve my seats perfectly. ...and they are cut so well, they LOOK like something from the factory.

Sometimes CostCo has a deal on these - I got front / rear shipped for around $300

 

Reviving this:

FYI, Costco has these for front and rear neoprene only, $279 after $70 rebate (normally $349).

Valid 3/5 - 3/30

 

I've got the ones in multicam black and love them. They fit well and wear well.

 

Had mine on for over a year now that I bought through Costco - black outer/grey inner for back and front seats and they were really well and ever couple of months I take a spray bottle of wetsuit cleaner and spray them down real good and sponge them off and leave to dry with the windows down for a couple of hours. So easy to keep clean and looking like the day I put them on!

 

I had the coverking spacer mesh on my sr utility, liked them a lot. They are a huge pain in the ass to install, but once done correctly, and with nonskid pads underneath, they looked absolutely like a factory seat cover

 

I've seen other people suggest just removing the front seats to install, my set is out for delivery today and I'm thinking about popping them out and installing on the garage floor - do you think that would have been helpful?

 

anyone have heated seats with these covers? how well do the perform? can you even still feel the heat?

 

Where are you getting these in Canada? (or similar fitted ones?) Costco.ca has these for $579, so about $600 with tax for the set.

 

I've had a set in my first gen for over a year. They still look and fit great!

 

I never got much of an answer the few times I've asked this, I will let you know this afternoon when I get mine installed!

 

thank you! been asking it for a long time too and never got an answer.

 

I have heard that as well, but I decided there was too much skin on my knuckles, so I went for it. Lol!
Seriously, though I was not wanting to mess with the airbag wiring If I didn’t have to. That being said, I only had an access cab utility (rear seat delete), and I had more room to get behind the front seats. I did read others say the back seats were nearly impossible without removing.
Hope that answers your question. Congrats on the new covers, you’ll get compliments on them.

 

Lets know if you end up taking the seats out. Did you get them through Costco?

 

I just unbolted the front driver seat and tilted it back, there are 3 connectors 2 were easy to disconnect but the airbag one is a bitch so I think I'm going to leave it connected and just work around the seat with the extra room from it not being bolted down.

I did get them from Costco, $279 for front and rear, ordered the night of March 8 and they shipped on the 13th and out for delivery today.

 

thanks, show them off when you get done.

 

sub'd

 

They just delivered a little over an hour ago, but I only got the front set. I called Costco, they said that typically the vendor ships front vs rear separately and they ship them as they are made so it's common to get them a couple days apart - they offered to call and check on them but I just told them I'd call back next week if they didn't arrive and I just wanted to make sure my order was correct, which it is.

For the install, I highly recommend unbolting the seat, but removing it is not necessary at all - 4 14mm bolts per seat and you are set. Very easy to install with the seat unbolted where you can flip it backwards and access the underside for the bungee attachment points.

I still have the passenger side to do, but I put together a few pictures. I had one of those plastic tool kits for removing access panels and retaining clips etc, that was usefull for stuffing the seams in around the plastic at the base of the seat (if you don't have that a butter knife would work just as well).

The fit on the material is pretty spot on, after I had pulled it over the seats and pretty much finished up I went to the top to tuck the material under the headrest mounting holes and they were already lined up perfectly. I think once it stretches to the seats it will be even better. Adds a tad more cushion as well.

Hopefully they are easy to clean and last several years - it's probably static and I do live in a very dry area, I did notice that a lot of dust and dog hairs were clinging to the material as I unboxed it and when I was moving the seat around.

https://imgur.com/a/uuloM

 

Just installed mine. I went with the Neosupreme seat covers. $145 and free shipping from anything auto. Unbolting the seats made the install easy. Very happy with the fit and quality.