Keystone State Thread

Hay thanks
Think it will fit 3rd gen
Could you post a close up pix of the mounting points thanks

 

if the sun comes up this am not a problem.....

this from the web site will shoot mine once its light...think you can enlarge this one if you need to

 

Awsom thanks
I wasn't able to from the website ,yours I can

 

sure..I had to bend mine slightly ..like 1/8" to clear the tailgate..run a 4' fire stick when Im go to Va or somewhere on the innerstates, a 3 " normally..never had a issue with th mount bending flexing etc and it stays where I bent for clearance really nice unit

 

Some 3rd gens have had problems with mounts like that. The gap on the sides of the tailgate wasn't really wide enough. Some would fit but some guys lost a little paint from vibration. I think it really depends on the truck.

I made one that mounts to the bed rail and one of the bolts that the bamf uses with a piece of 1 1/2 angle. A grinder and a drill are all you need. I'll see if I have a pic.

 

Where you going!?

 

https://www.tacomaworld.com/threads...cks-techniques.229517/page-1070#post-17403618

 

The areas I mentioned are still the Jordan creek, just further upstream. The Jordan in the park and by Home Depot get pretty packed with people. Are you fishing by yourself? PM me, maybe we can meet up somewhere and I’ll show you the secret spots. I normally don’t get out until 10 or so on the opener. Too many people out until then. I normally have the spot to myself after 11.

 

I’ll be by myself most likely ,my buddy that usually goes with me just had a newborn and is getting Easter pictures done that day . Usully get there around 10:30 11 usually takes me a hour to drive down I’ll pm you my number

 

thanks for the info sounds possible

James that sounds cool when you get a chance send a pix id appreciate it

 

Let me see if I got a pick of it on the truck.

 

@Grand dude

I thought I had a pic of it on the truck painted, it would show up better. I did run a ground wire to the frame.

If that would work for you,you can have it.

 

Dam, some nice work there.it wont work for me though I have a softopper on but gave me an idea
thanks

 

I recently came across this one, made for 3rd gens. Looks like they try to combat flex. A bit pricey

 

Sebastian that's pretty cool it just might work

 

Thanks man. I only make them for 2nd gens though

 

3rd gen different mount?

 

Yes, mounts differently and is also a tighter gap. I’ve just been so busy with my full time job and building sliders for local members here that I haven’t come up with an antenna mount for the 3rd gens. Probably never will lol

 

@Grand dude

Have you thought about a hood mount?