New England B.S. Thread

Cativelense · Mar 18, 2018

micwillia said: ↑

Well was in @Cativelense's neighborhood for a bday party/beer olympics. The Massholes walked away champions!

Side note this anyone on here? Was cruising along with you on 84E Waterbury to Hartford

Click to expand...

Where where you? Nice trophy!

tacobell007 · Mar 18, 2018

Cativelense said: ↑

Ok peeps, the deed is done. So let's start this off the proper way in chronological order.

Yesterday it all happened. Showed up at Drew's (@tacobell007) house around 10. It was a bit chilly and windy. We BSed for a bit, took the parts off the truck and opened up the boxes. We, I mean Drew, started to take the passenger front wheel off, and taking out all of the bolts. Right as we were doing that, Rebecca (@DoubleRGirl) popped in to say what's up and see what was going down, along with her BF. He's a cool guy. So while they were both there, Drew took off the other wheel and all the bolts out. Tony (@Boston10Taco) showed up a bit after that to help out. Got the needle bearing replacement done, and while that was getting finished up Rebecca and her boyfriend left. It was windy as heck and cold, and she was shivering. The front got finished up without any major issues. Just took time because of all the parts that needed to be removed. Then, onto the back, where things got interesting. Took the wheels off, cut the u-bolts, and took off what needed to be. Where shit hit the fan was trying to remove the stock leaf pack in order to install the AAL. One of the shackle bolts would not come off. Took forever to finally get it out. Adding to that, one of the leaf pack bolts stripped because I USED THE WRONG NUT to get it back together. Tony ran out to try and find a new one, at about 8pm, but no luck. Drew cut the top of the bolt off and re-threaded it and we got it to work. Finally got it all finished up at about 10:30pm.

While all of this was going on, the wife was texting asking what was going on and taking so long. She was upset because I left the house early and hadn't been with her and the kids all day, and was missing St Patrick's day dinner together. Not a happy camper. I finally left Drew's at 11pm and got home at 12:30am. She was still up doing school work, getting report cards together, etc. I came clean about what I had done, how much it cost, and explained to her why it took so long. She said she didn't want to hear about my truck anymore, and that she didn't want me to do anything else to it. Said the truck was consuming my life. I can understand that and see her point of view. I don't really want to do anything else to it besides getting the cap painted, so that should be it and I told her that. I think she's still upset. Getting a weird vibe today. Not sure if it's because of not being home all day, or because of what I did. Time will tell hopefully.

So... I want to give a huge thank you to Drew for letting me come to his house and do it, and letting me watch mostly and help here and there. I want to give an even bigger thank you to Tony for coming to help. He didn't have to since he doesn't really know me from anywhere, so I really really appreciate it. You sir are the man. I want to give you something as a thank you if it's ok with you. And thank you to Rebecca for stopping by and snapping a few pics. Feel free to post them.

I honestly didn't take any pics. Was too curious watching, trying to help, and stressing out about the consequences. I'll try and measure at some point, and take a few pics.

So that's it. Done. Let the chips fall where they may.
Click to expand...

Anytime man!

micwillia · Mar 18, 2018

Cativelense said: ↑

Where where you? Nice trophy!
Click to expand...

Sherman, in the middle of the woods

Cativelense · Mar 18, 2018

micwillia said: ↑

Sherman, in the middle of the woods
Click to expand...

Yeah it is!

Blais03 · Mar 18, 2018

Cativelense said: ↑

Ok peeps, the deed is done. So let's start this off the proper way in chronological order.

Yesterday it all happened. Showed up at Drew's (@tacobell007) house around 10. It was a bit chilly and windy. We BSed for a bit, took the parts off the truck and opened up the boxes. We, I mean Drew, started to take the passenger front wheel off, and taking out all of the bolts. Right as we were doing that, Rebecca (@DoubleRGirl) popped in to say what's up and see what was going down, along with her BF. He's a cool guy. So while they were both there, Drew took off the other wheel and all the bolts out. Tony (@Boston10Taco) showed up a bit after that to help out. Got the needle bearing replacement done, and while that was getting finished up Rebecca and her boyfriend left. It was windy as heck and cold, and she was shivering. The front got finished up without any major issues. Just took time because of all the parts that needed to be removed. Then, onto the back, where things got interesting. Took the wheels off, cut the u-bolts, and took off what needed to be. Where shit hit the fan was trying to remove the stock leaf pack in order to install the AAL. One of the shackle bolts would not come off. Took forever to finally get it out. Adding to that, one of the leaf pack bolts stripped because I USED THE WRONG NUT to get it back together. Tony ran out to try and find a new one, at about 8pm, but no luck. Drew cut the top of the bolt off and re-threaded it and we got it to work. Finally got it all finished up at about 10:30pm.

While all of this was going on, the wife was texting asking what was going on and taking so long. She was upset because I left the house early and hadn't been with her and the kids all day, and was missing St Patrick's day dinner together. Not a happy camper. I finally left Drew's at 11pm and got home at 12:30am. She was still up doing school work, getting report cards together, etc. I came clean about what I had done, how much it cost, and explained to her why it took so long. She said she didn't want to hear about my truck anymore, and that she didn't want me to do anything else to it. Said the truck was consuming my life. I can understand that and see her point of view. I don't really want to do anything else to it besides getting the cap painted, so that should be it and I told her that. I think she's still upset. Getting a weird vibe today. Not sure if it's because of not being home all day, or because of what I did. Time will tell hopefully.

So... I want to give a huge thank you to Drew for letting me come to his house and do it, and letting me watch mostly and help here and there. I want to give an even bigger thank you to Tony for coming to help. He didn't have to since he doesn't really know me from anywhere, so I really really appreciate it. You sir are the man. I want to give you something as a thank you if it's ok with you. And thank you to Rebecca for stopping by and snapping a few pics. Feel free to post them.

I honestly didn't take any pics. Was too curious watching, trying to help, and stressing out about the consequences. I'll try and measure at some point, and take a few pics.

So that's it. Done. Let the chips fall where they may.
Click to expand...

I beeped at you last night on east mountain rd

Edit: I actually beeped at @Boston10Taco because I remember the tube bumper On a silver truck

BigMacMcCoy · Mar 18, 2018

Cativelense said: ↑

Good morning everyone. Happy Sunday. Up this morning bright and early to go to my pick up soccer game. Went to bed super late last night so really feeling it.
Click to expand...

I also was up late, but instead of soccer, I get to work!

js312 said: ↑

I have an Ultragauge MX 1.3 in my truck that I need to take out before I get the new one.

Want it? $50 and it's yours.
Click to expand...

Thanks my man! Much appreciated. Sell it to Drew though, I'm still trying to figure out which one I want and all the details haha

Dgibson529 said: ↑

I’ve had an ultra gauge in my truck for about 3 months now. Thought it would be more useful than it is but I also don’t tow hardly ever. I use mine for MPG mostly and miles to empty. It shows that I get about 18mpg but I don’t buy it considering I only get about 250 miles until I need to fill up again.
Click to expand...

js312 said: ↑

You can calibrate the MPG. Tell it exactly how many gallons you put in a few times and it will be dead on, or at least mine is.
Click to expand...

Yeah I hear some of the gauges are hard to calibrate, but I think it'll be worth it!

Cativelense said: ↑

Ok peeps, the deed is done. So let's start this off the proper way in chronological order.

Yesterday it all happened. Showed up at Drew's (@tacobell007) house around 10. It was a bit chilly and windy. We BSed for a bit, took the parts off the truck and opened up the boxes. We, I mean Drew, started to take the passenger front wheel off, and taking out all of the bolts. Right as we were doing that, Rebecca (@DoubleRGirl) popped in to say what's up and see what was going down, along with her BF. He's a cool guy. So while they were both there, Drew took off the other wheel and all the bolts out. Tony (@Boston10Taco) showed up a bit after that to help out. Got the needle bearing replacement done, and while that was getting finished up Rebecca and her boyfriend left. It was windy as heck and cold, and she was shivering. The front got finished up without any major issues. Just took time because of all the parts that needed to be removed. Then, onto the back, where things got interesting. Took the wheels off, cut the u-bolts, and took off what needed to be. Where shit hit the fan was trying to remove the stock leaf pack in order to install the AAL. One of the shackle bolts would not come off. Took forever to finally get it out. Adding to that, one of the leaf pack bolts stripped because I USED THE WRONG NUT to get it back together. Tony ran out to try and find a new one, at about 8pm, but no luck. Drew cut the top of the bolt off and re-threaded it and we got it to work. Finally got it all finished up at about 10:30pm.

While all of this was going on, the wife was texting asking what was going on and taking so long. She was upset because I left the house early and hadn't been with her and the kids all day, and was missing St Patrick's day dinner together. Not a happy camper. I finally left Drew's at 11pm and got home at 12:30am. She was still up doing school work, getting report cards together, etc. I came clean about what I had done, how much it cost, and explained to her why it took so long. She said she didn't want to hear about my truck anymore, and that she didn't want me to do anything else to it. Said the truck was consuming my life. I can understand that and see her point of view. I don't really want to do anything else to it besides getting the cap painted, so that should be it and I told her that. I think she's still upset. Getting a weird vibe today. Not sure if it's because of not being home all day, or because of what I did. Time will tell hopefully.

So... I want to give a huge thank you to Drew for letting me come to his house and do it, and letting me watch mostly and help here and there. I want to give an even bigger thank you to Tony for coming to help. He didn't have to since he doesn't really know me from anywhere, so I really really appreciate it. You sir are the man. I want to give you something as a thank you if it's ok with you. And thank you to Rebecca for stopping by and snapping a few pics. Feel free to post them.

I honestly didn't take any pics. Was too curious watching, trying to help, and stressing out about the consequences. I'll try and measure at some point, and take a few pics.

So that's it. Done. Let the chips fall where they may.
Click to expand...

tacobell007 said: ↑

Anytime man!

Click to expand...

So jealous that I missed out on this. If I wasn't working I was going to be there. Sounds like I would have froze to death though haha. Looks good though Nuno! Enjoy it!

BigMacMcCoy · Mar 18, 2018

Just starting my Ops Duty shift for today. Woo...

Molly is sending me pictures from Puerto Rico, which makes me feel so much better haha

tacobell007 · Mar 18, 2018

BigMacMcCoy said: ↑

I also was up late, but instead of soccer, I get to work!

Thanks my man! Much appreciated. Sell it to Drew though, I'm still trying to figure out which one I want and all the details haha

Yeah I hear some of the gauges are hard to calibrate, but I think it'll be worth it!

So jealous that I missed out on this. If I wasn't working I was going to be there. Sounds like I would have froze to death though haha. Looks good though Nuno! Enjoy it!
Click to expand...

The wind kind of sucked at times, but until the sun started setting it wasn't terrible

Cativelense · Mar 18, 2018

Blais03 said: ↑

I beeped at you last night on east mountain rd

Edit: I actually beeped at @Boston10Taco because I remember the tube bumper On a silver truck
Click to expand...

Tony said someone beeped at him when he ran out, but didn't know who it was. Maybe it was you.

BigMacMcCoy said: ↑

I also was up late, but instead of soccer, I get to work!

Thanks my man! Much appreciated. Sell it to Drew though, I'm still trying to figure out which one I want and all the details haha

Yeah I hear some of the gauges are hard to calibrate, but I think it'll be worth it!

So jealous that I missed out on this. If I wasn't working I was going to be there. Sounds like I would have froze to death though haha. Looks good though Nuno! Enjoy it!
Click to expand...

Thank you sir!

Blais03 · Mar 18, 2018

Cativelense said: ↑

Tony said someone beeped at him when he ran out, but didn't know who it was. Maybe it was you.

Thank you sir!
Click to expand...

Yeah it was me. Right under the bridge by the stop sign around like 9pm I think

BigMacMcCoy · Mar 18, 2018

tacobell007 said: ↑

The wind kind of sucked at times, but until the sun started setting it wasn't terrible
Click to expand...

Well I'm glad y'all got that done! Now you can finish up that bumper for me

@Cativelense are you going get an alignment soon?

Cativelense · Mar 18, 2018

Blais03 said: ↑

Yeah it was me. Right under the bridge by the stop sign around like 9pm I think
Click to expand...

Yup, that was exactly where he said and around the time.

Blais03 · Mar 18, 2018

Cativelense said: ↑

Yup, that was exactly where he said and around the time.
Click to expand...

Was on my way to Apple bees lol half
Price apps after 9pm is a killer deal

Cativelense · Mar 18, 2018

BigMacMcCoy said: ↑

Well I'm glad y'all got that done! Now you can finish up that bumper for me

@Cativelense are you going get an alignment soon?
Click to expand...

Yup, planning on it either today or tomorrow.

DoubleRGirl · Mar 18, 2018

Cativelense said: ↑

Ok peeps, the deed is done. So let's start this off the proper way in chronological order.

Yesterday it all happened. Showed up at Drew's (@tacobell007) house around 10. It was a bit chilly and windy. We BSed for a bit, took the parts off the truck and opened up the boxes. We, I mean Drew, started to take the passenger front wheel off, and taking out all of the bolts. Right as we were doing that, Rebecca (@DoubleRGirl) popped in to say what's up and see what was going down, along with her BF. He's a cool guy. So while they were both there, Drew took off the other wheel and all the bolts out. Tony (@Boston10Taco) showed up a bit after that to help out. Got the needle bearing replacement done, and while that was getting finished up Rebecca and her boyfriend left. It was windy as heck and cold, and she was shivering. The front got finished up without any major issues. Just took time because of all the parts that needed to be removed. Then, onto the back, where things got interesting. Took the wheels off, cut the u-bolts, and took off what needed to be. Where shit hit the fan was trying to remove the stock leaf pack in order to install the AAL. One of the shackle bolts would not come off. Took forever to finally get it out. Adding to that, one of the leaf pack bolts stripped because I USED THE WRONG NUT to get it back together. Tony ran out to try and find a new one, at about 8pm, but no luck. Drew cut the top of the bolt off and re-threaded it and we got it to work. Finally got it all finished up at about 10:30pm.

While all of this was going on, the wife was texting asking what was going on and taking so long. She was upset because I left the house early and hadn't been with her and the kids all day, and was missing St Patrick's day dinner together. Not a happy camper. I finally left Drew's at 11pm and got home at 12:30am. She was still up doing school work, getting report cards together, etc. I came clean about what I had done, how much it cost, and explained to her why it took so long. She said she didn't want to hear about my truck anymore, and that she didn't want me to do anything else to it. Said the truck was consuming my life. I can understand that and see her point of view. I don't really want to do anything else to it besides getting the cap painted, so that should be it and I told her that. I think she's still upset. Getting a weird vibe today. Not sure if it's because of not being home all day, or because of what I did. Time will tell hopefully.

So... I want to give a huge thank you to Drew for letting me come to his house and do it, and letting me watch mostly and help here and there. I want to give an even bigger thank you to Tony for coming to help. He didn't have to since he doesn't really know me from anywhere, so I really really appreciate it. You sir are the man. I want to give you something as a thank you if it's ok with you. And thank you to Rebecca for stopping by and snapping a few pics. Feel free to post them.

I honestly didn't take any pics. Was too curious watching, trying to help, and stressing out about the consequences. I'll try and measure at some point, and take a few pics.

So that's it. Done. Let the chips fall where they may.
Click to expand...

Cativelense · Mar 18, 2018

DoubleRGirl said: ↑

Click to expand...

Thanks Rebecca!

Hunter.415 · Mar 18, 2018

Cativelense said: ↑

Ok peeps, the deed is done. So let's start this off the proper way in chronological order.

Yesterday it all happened. Showed up at Drew's (@tacobell007) house around 10. It was a bit chilly and windy. We BSed for a bit, took the parts off the truck and opened up the boxes. We, I mean Drew, started to take the passenger front wheel off, and taking out all of the bolts. Right as we were doing that, Rebecca (@DoubleRGirl) popped in to say what's up and see what was going down, along with her BF. He's a cool guy. So while they were both there, Drew took off the other wheel and all the bolts out. Tony (@Boston10Taco) showed up a bit after that to help out. Got the needle bearing replacement done, and while that was getting finished up Rebecca and her boyfriend left. It was windy as heck and cold, and she was shivering. The front got finished up without any major issues. Just took time because of all the parts that needed to be removed. Then, onto the back, where things got interesting. Took the wheels off, cut the u-bolts, and took off what needed to be. Where shit hit the fan was trying to remove the stock leaf pack in order to install the AAL. One of the shackle bolts would not come off. Took forever to finally get it out. Adding to that, one of the leaf pack bolts stripped because I USED THE WRONG NUT to get it back together. Tony ran out to try and find a new one, at about 8pm, but no luck. Drew cut the top of the bolt off and re-threaded it and we got it to work. Finally got it all finished up at about 10:30pm.

While all of this was going on, the wife was texting asking what was going on and taking so long. She was upset because I left the house early and hadn't been with her and the kids all day, and was missing St Patrick's day dinner together. Not a happy camper. I finally left Drew's at 11pm and got home at 12:30am. She was still up doing school work, getting report cards together, etc. I came clean about what I had done, how much it cost, and explained to her why it took so long. She said she didn't want to hear about my truck anymore, and that she didn't want me to do anything else to it. Said the truck was consuming my life. I can understand that and see her point of view. I don't really want to do anything else to it besides getting the cap painted, so that should be it and I told her that. I think she's still upset. Getting a weird vibe today. Not sure if it's because of not being home all day, or because of what I did. Time will tell hopefully.

So... I want to give a huge thank you to Drew for letting me come to his house and do it, and letting me watch mostly and help here and there. I want to give an even bigger thank you to Tony for coming to help. He didn't have to since he doesn't really know me from anywhere, so I really really appreciate it. You sir are the man. I want to give you something as a thank you if it's ok with you. And thank you to Rebecca for stopping by and snapping a few pics. Feel free to post them.

I honestly didn't take any pics. Was too curious watching, trying to help, and stressing out about the consequences. I'll try and measure at some point, and take a few pics.

So that's it. Done. Let the chips fall where they may.
Click to expand...

Thanks for the heads up that it was being done yesterday. I see how it goes ,
So you young guy don't really want to make friend around here unless they are drinkers or wheeler. Again thank a lot

Cativelense · Mar 18, 2018

Hunter.415 said: ↑

Thanks for the heads up that it was being done yesterday. I see jo
Click to expand...

Sorry man. It was kind of last minute thing. The day got freed up the night before, so I jumped on it.

micwillia · Mar 18, 2018

Cativelense said: ↑

Ok peeps, the deed is done. So let's start this off the proper way in chronological order.

Yesterday it all happened. Showed up at Drew's (@tacobell007) house around 10. It was a bit chilly and windy. We BSed for a bit, took the parts off the truck and opened up the boxes. We, I mean Drew, started to take the passenger front wheel off, and taking out all of the bolts. Right as we were doing that, Rebecca (@DoubleRGirl) popped in to say what's up and see what was going down, along with her BF. He's a cool guy. So while they were both there, Drew took off the other wheel and all the bolts out. Tony (@Boston10Taco) showed up a bit after that to help out. Got the needle bearing replacement done, and while that was getting finished up Rebecca and her boyfriend left. It was windy as heck and cold, and she was shivering. The front got finished up without any major issues. Just took time because of all the parts that needed to be removed. Then, onto the back, where things got interesting. Took the wheels off, cut the u-bolts, and took off what needed to be. Where shit hit the fan was trying to remove the stock leaf pack in order to install the AAL. One of the shackle bolts would not come off. Took forever to finally get it out. Adding to that, one of the leaf pack bolts stripped because I USED THE WRONG NUT to get it back together. Tony ran out to try and find a new one, at about 8pm, but no luck. Drew cut the top of the bolt off and re-threaded it and we got it to work. Finally got it all finished up at about 10:30pm.

While all of this was going on, the wife was texting asking what was going on and taking so long. She was upset because I left the house early and hadn't been with her and the kids all day, and was missing St Patrick's day dinner together. Not a happy camper. I finally left Drew's at 11pm and got home at 12:30am. She was still up doing school work, getting report cards together, etc. I came clean about what I had done, how much it cost, and explained to her why it took so long. She said she didn't want to hear about my truck anymore, and that she didn't want me to do anything else to it. Said the truck was consuming my life. I can understand that and see her point of view. I don't really want to do anything else to it besides getting the cap painted, so that should be it and I told her that. I think she's still upset. Getting a weird vibe today. Not sure if it's because of not being home all day, or because of what I did. Time will tell hopefully.

So... I want to give a huge thank you to Drew for letting me come to his house and do it, and letting me watch mostly and help here and there. I want to give an even bigger thank you to Tony for coming to help. He didn't have to since he doesn't really know me from anywhere, so I really really appreciate it. You sir are the man. I want to give you something as a thank you if it's ok with you. And thank you to Rebecca for stopping by and snapping a few pics. Feel free to post them.

I honestly didn't take any pics. Was too curious watching, trying to help, and stressing out about the consequences. I'll try and measure at some point, and take a few pics.

So that's it. Done. Let the chips fall where they may.
Click to expand...

tacobell007 said: ↑

Anytime man!

Click to expand...

BigMacMcCoy said: ↑

I also was up late, but instead of soccer, I get to work!

Thanks my man! Much appreciated. Sell it to Drew though, I'm still trying to figure out which one I want and all the details haha

Yeah I hear some of the gauges are hard to calibrate, but I think it'll be worth it!

So jealous that I missed out on this. If I wasn't working I was going to be there. Sounds like I would have froze to death though haha. Looks good though Nuno! Enjoy it!
Click to expand...

Looks good guys. I second @BigMacMcCoy about missing out; wish I could have helped out turning some bolts. Well maybe there will be another chance for it if @tacobell007 would be willing to help on my suspension when I get to that point not like it's happening anytime soon. Good luck @Cativelense, hopefully the wife is understanding & your not in the dog house too long

DoubleRGirl · Mar 18, 2018

Hunter.415 said: ↑

Thanks for the heads up that it was being done yesterday. I see how it goes ,
So you young guy don't really want to make friend around here unless they are drinkers or wheeler. Again thank a lot
Click to expand...

I got wassssted

Log in or Sign up

Welcome to Tacoma World!

New England B.S. Thread

#133101
Cativelense Well-Known Member

#133102
tacobell007 Western Mass Automotive Coatings

#133103
micwillia Nonstop Tinkerer

#133104
Cativelense Well-Known Member

#133105
Blais03 Guess I'll bring a spare wheel bearing...

#133106
BigMacMcCoy Cajun In Vienna

#133107
BigMacMcCoy Cajun In Vienna

#133108
tacobell007 Western Mass Automotive Coatings

#133109
Cativelense Well-Known Member

#133110
Blais03 Guess I'll bring a spare wheel bearing...

#133111
BigMacMcCoy Cajun In Vienna

#133112
Cativelense Well-Known Member

#133113
Blais03 Guess I'll bring a spare wheel bearing...

#133114
Cativelense Well-Known Member

#133115
DoubleRGirl Hello Kitty Edition

#133116
Cativelense Well-Known Member

#133117
Hunter.415 Well-Known Member

#133118
Cativelense Well-Known Member

#133119
micwillia Nonstop Tinkerer

#133120
DoubleRGirl Hello Kitty Edition

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

New England B.S. Thread

#133101 Cativelense Well-Known Member

#133102 tacobell007 Western Mass Automotive Coatings

#133103 micwillia Nonstop Tinkerer

#133104 Cativelense Well-Known Member

#133105 Blais03 Guess I'll bring a spare wheel bearing...

#133106 BigMacMcCoy Cajun In Vienna

#133107 BigMacMcCoy Cajun In Vienna

#133108 tacobell007 Western Mass Automotive Coatings

#133109 Cativelense Well-Known Member

#133110 Blais03 Guess I'll bring a spare wheel bearing...

#133111 BigMacMcCoy Cajun In Vienna

#133112 Cativelense Well-Known Member

#133113 Blais03 Guess I'll bring a spare wheel bearing...

#133114 Cativelense Well-Known Member

#133115 DoubleRGirl Hello Kitty Edition

#133116 Cativelense Well-Known Member

#133117 Hunter.415 Well-Known Member

#133118 Cativelense Well-Known Member

#133119 micwillia Nonstop Tinkerer

#133120 DoubleRGirl Hello Kitty Edition

Products Discussed in Entire Site Forum: North East Thread: New England B.S. Thread

#133101
Cativelense Well-Known Member

#133102
tacobell007 Western Mass Automotive Coatings

#133103
micwillia Nonstop Tinkerer

#133104
Cativelense Well-Known Member

#133105
Blais03 Guess I'll bring a spare wheel bearing...

#133106
BigMacMcCoy Cajun In Vienna

#133107
BigMacMcCoy Cajun In Vienna

#133108
tacobell007 Western Mass Automotive Coatings

#133109
Cativelense Well-Known Member

#133110
Blais03 Guess I'll bring a spare wheel bearing...

#133111
BigMacMcCoy Cajun In Vienna

#133112
Cativelense Well-Known Member

#133113
Blais03 Guess I'll bring a spare wheel bearing...

#133114
Cativelense Well-Known Member

#133115
DoubleRGirl Hello Kitty Edition

#133116
Cativelense Well-Known Member

#133117
Hunter.415 Well-Known Member

#133118
Cativelense Well-Known Member

#133119
micwillia Nonstop Tinkerer

#133120
DoubleRGirl Hello Kitty Edition

Products Discussed in