2016 OVTune Tacoma 3.5L Manual Transmission / Engine ECU Reflash

Or is he? *gasp*

 

Lol, yeah it totally was!

I usually have a pretty thick skin, but not today apparently.

Need more

 

thanks again for the effort. to all of you who are helping. the timing for me sucks so i can't do anything other than wait now.

 

All good man we're here to help the community

 

No worries man, we know you'd be in on this if you could.

See, this is the stuff that I like about TW. Under the pond scum of seemingly endless tomfoolery and childish 2nd genners , there really are great ppl in here who help one another out.

 

Lolol

 

back, tested on my truck, bingo

 

Nice!

Can't wait to see everything rolled into the next tune version!

 

Just some curiosity question.
Matt, what kind of data rate are you seeing with that many variables? (I was pulling about 15 Hz with 3 real number and 3 booleans) How big is the Techstream logs? Do you forsee skipping a dedicated logger, as Techstream seems pretty effective.

 

techstream logs size in CSV around 9-12 mb for 30mins (quite large)
I'll have to check again but I believe usually 20hz or more, highest I've ever seen out of any logger was 60-70

I still plan to implement my own logger. Techstream is over-complicated.
The capture rate and available list is just Toyotas enhanced mode PID list (0Axx) my test logger already can capture as much and as fast as techstream (probably because I traced everything techstream does to make it lol)

 

I know you asked Mat, but I noticed today while logging with his PID config there was a little field in the lower left corner of the main window while recording - it was reading in milliseconds, bouncing between ~110 and 119.

 

quick Review , be great to hear some feed back ?


Running O4B12 103.c 91 , got about 250Km on it running smoothly , can feel the power curve band kick in at lower RPM

I don't know of 103.b has same power band ? just reading reviews seem throttle has more sensitivity ?

Running 87 gas seems to be some thing that these motors do not like ?

 

Wow look at what I missed!

Too late to start logging now? Or should I just wait for the next tune revision?

 

AGAIN with the cryptic messages

 

Ditto, on mine as well,I mostly notice it when I am backing into my parking space at work.

 

I think he was referring to the fine throttle control - he sent me a file that worked to fix that and also tested it on his own truck - success!

 

I see. I'm curious how it feels compared to the 1st test tune file. Dammit Matt, send me the new test file

 

Yeah I can't wait to see all of the fixes rolled into the next test tune!

BTW the file in which he fixed that particular issue was limited to just that.. it wasn't a complete tune ready for everyone to log.

 

I just sent an email to Matt with a log from today's log run on 1.03C.00002.... or so I thought,I forgot to attach the log file so I had to send him a second email...

This tune keeps improving,about ten minutes into the drive I was finally able to catch the stumble at part throttle,slow speed while turning. It may just be operator error but if not hopefully Matt see's it and can figure out what is happening.

 

Makes sense.