Wiring help please

Ok OEM style switch wires have 4 and ditch lights have three.... I got it to work but it stays illuminated.... what am I doing wrong???

 

What brand and model switch? What exactly are you wiring and what components do you have?

 

caliraised ditch lights 2x2

wiring to an oem style switch

 

Are you using a relay? The oem switch plug has 2 reds, one is for constant light tied into your dash lights if you wish, and the other turns the switch on, typically lighting up the other half of the switch.

 

Brand/model is helpful, as certain OEM style switches are rated 3 amps and other 20/30 amps. Wiring inside the switch differs too.

 

It should have came with this..

 

This might help too

 

If his switch is a ch4x4 switch.. If it's not it could be different.

 

this looks just like what im trying to do.

let me try this

 

Good luck

 

Thanks all of you! It was a success, got the ditch lights and anytime rear view camera switches hooked up

 

I didn’t use the other red wire. Didn’t want it lit up at all times. It’s preference really.

 

I used the second red and mine is only lit up when the ditch lights are on

 

Same here. Which is perfect for what I was wanting to accomplish.