Colorado Trading Post

Sounds good.

 

I found out the hard way that if you are talking about gigabit internet, you need DOCSIS 3.1

 

WEEKLY BUMP

I’m ready to find a new owner for my All Pro bed rack. All it needs is a fresh coat of paint (or not). It is off the truck and ready to go. Comes with all hardware. I can get more detailed pictures or different angles if someone wants. $250

 

I have a Motorolla SB6120 (DOCSIS 3.0) I had listed for $20, for you, 10 dollah if you want it (and I will not be offended if you don't want to pay anything and pass). It doesn't have a built-in wireless.

2.0 tops out at 40Mbps down. 3.0 tops out at 1 gig down, but it's up to the providers and their configuration as to what you can actually get. With that modem, Comcast has told me for years it was 'end of life' and 'not supported' but it works fine (every time they blamed my modem, every time they came out and replaced wiring outside the house, and the last time I had to go get one of their modems for a week and demonstrate it had the same damn issue before going back to my modem). However, I think they most they let the speed hit is like 75 Mbps. I do know that it won't hit the full 150 Mbps speed that they have or had at the time I investigated the issue.

If you want full (higher) speeds from Comcast, you will need a newer modem, and they may be requiring/spec'ing 3.1 now.

 

Anyone need a shop truck?

$1400 as is, more if I fix the hood/grille

1994
22RE
231k miles
Brand new windshield, needs a little love but runs and drives well (Has more power than my 2017 Yaris )

 

What fatass sat on the hood?

 

your mom

 

@thefatkid

 

She is visiting over easter and does lover her butter filled southern cooking.....

 

cool, cya at Easter dinner


I think you need a parts runner

 

I think i do too...... but has to be car seat friendly..... and no ratchet straps are not an appropriate restraint system in the truck bed.... i tried that on my wife....

 

yeah, that's valid. I wouldn't want lil Chris junior running around in this thing either since it's not car seat friendly








(I'm assuming the carseat is not for your wife )

 

I need to get rid of this lil truck before I get tempted to rat rod it




...I've been looking at 5.0 donors on CL

 

I bet somebody wants it! Beer and/or 9mm will do

 

I was just thinking the same thing. Think with a little love and fab work this could run the Baja 500?

 

$1000 for a Sky's SAS kit, another $1000 in craigslist parts and you could have a SAS 4wd... I might still go that route and leave my Taco as-is.


If you're having similar thoughts I have a set of 38.5" Swamper rollers in storage off my Jeep than I could throw in too

 

Plus you don't have to sweat the first scratch or dent since they're already there

 

Sounds tempting, although with all the money I spend on my DD I'm pretty sure I would need to make plans to live out of the truck as well...because wife.

 

ah, the things we do (and don't do) for love...