AZ Classifieds

tymeson · Mar 22, 2018

I might go broke seeing all of this stuff.

tymeson · Mar 22, 2018

Greensystemsgo said: ↑

FULL FUCKING PART OUT

Its finally happening. I have sunk alot of time and money into this black bitch, but I have had enough. Last year my commute drastically increased and I proceeded to find ALMOST every weak component on this bucket. Plus, I was hit 7 times last year in it, but sustained minimal damage (see frame), and three times prior to that in the 5 years ive owned it. It has a bullseye, I just haven't been able to find it to paint over it. It was a very expensive summer. Summer was around 5k miles ago. I can provide more info, pics, package deals, and handys on request. Just PM me. You az guys get first dibs cause I love you. Truck is currently located in Whitman AZ, right by the Ford proving grounds. I have reciepts for all of the new shit, and some for the recently installed shit as well. The engine let go Jan 2nd 2018 and it has been parked since. Upon disassembly I found it needs way more then I am willing to do, especially considering the shape of the cab.

Suspension/Drivetrain stuff

$750 - Rear ELocker axle, 4.10's, drum to drum, with harness. Brakes, bearings, wheel seals within the last 2 years, 3rd resealed ~1000 miles ago, backlash checked and still riding purty.

$250 - (NEW) Nitro gear and axle chromalloy axle shafts, non abs

$400 - Manual Hubs/spindles - Never installed, bought from a guy off of pirate a year or two ago

$400 - Light racing UCA's with greasable ball joints, ~3 years old, Bushings regressed every year, 1 ball joint replaced ~6 months ago, have 2x used balljoints, and 1x NEW, along with a spare pass side arm and broken driver side (old set)

$400 - All Pro EXPO leafs - Purchased ~2011, believed to be alcan

$100 - (NEW in box) Bilstein 5125's for the rear, BSN-33-186542

$50 - Biltsein 5125's for the rear, used

$150 - Biltsein 5100's with 750# eibach coils

$150 - Front diff with spacers, useful for a core or yard art. Spiders are blown. Had a spare getting rebuilt, and 'phx rack and axle' has had my spare since october. If you want that one, with spartan, call em up, say your me, and go get it. My loss, your gain.

$50 - Steering rack core - had my spare rebuilt and its sitting at phx rack and axle as well, its been done since october ~300 is what I was quoted, if you want it, its yours. Has warranty through them. I havent picked it up yet. The rack side of things is quick, the axle side not so much.

$300 - Big boy tundra brakes, slotted drilled rotors, ~5k miles on them, come with stainless lines

$50 - OEM brake lines (NEW) to convert to NON-ABS

$150 - chain driven manual tcase

$40 - Aftermarket tcase skid

$40 - OEM ADD cv's, need reseal/rebuild/good oem cores?

$100 - Vatozone cv's, lifetime warranty, we could warranty them out?

Exterior stuff

$800 - ( HOPING TO KEEP BUMPERS TOGETHER, WILL DISCOUNT A PACKAGE DEAL) Front Elite plate bumper with optional high-lift points, optional hoop, custom full hoop, with skid plates - Requires welding/cutting as it replaces the factory mount points, and skid plate tabs must be welded on under truck. Not for the faint of heart, but I assholed a civic and it didnt budge. Check build thread for pics of assholing and subsequent repowdercoating. Comes with mounted shackles, and leds as pictured. For beer I could probably help install.

$500 - Rear elite plate bumper with optional hitch, highlift points, and wraparound. Minor warpage in mounts, but it still sites centered.

$100 - (NEW) Ballistic Fab frame box kit, and tabs to relocate shocks.

$150 - (NEW) Rear swing out kit, 1500# spindle, latch, and pin from Ruffstuff, and wheel mount plate from ballistic.

$1000 - 12x 4runner limited wheels "5 spoke" - 7 or 8 center caps, 7x 285-75-16" Goodyear duratracs, 2x have less then 5k miles and are like new, 2x have ~75% tread left, 1x has ~60% tread, and 2x have ~40% tread left,

$100 - Silver hood, some dents

$125ea - Doors, driver and passenger, driver paint is in GREAT shape. OAK interior, power windows/locks, lifetime tint ~3 years ago

$100ea - fenders, no dents

$300 - High rise camper shell - led third brake light, the start of an interior cage for mounting roof rack and internal stuffs, Rear has recent fiberglass repair and is just primered, rest is old man tan. Newer struts, newer matching locks with keys.

$150 - Newer headlights, corner markers with integrated turn signals, and grill, along with new in toyota bag clips for headlight filler

$80 - Driver side window, spare

$60 - later first gen extended cab side window

$150 - rear slider window, broken latch (~30 from toyota, I never cared as I had a camper

$400 - Smittybilt winch with syth line, original remote, and in cab controls.

Interior stuff

$300 - Front seats, reupholstered around a year ago, comes with saddlemen seat covers that are ~5 months old.

Mechanical stuff

$300 - R150F - 3gear syncro isnt in best shape, but still shifts decent if you dont try and slam her into third.

$200 - Fuel tank with newew fuel pump ~5k miles and skid plate, newer fuel cap to go along with it ~2k

$300 - 2x ECU, 99 ABS Elocker 5vz MT

$400 - 5vz long block with heads and intake, no accessories, no cylinder ridge, can still see crosshatching, needs assembly (heads are off)

$200 - 5vz long block with heads and intake, no accessories, 280k miles, tired old engine.

$100ea - earlier cable throttle body with cruise, and later 5vz throttle body off of 04

$50 - throttle body that needs to be sent in and bored - maxbore.com

$150 - Steering column with wheel, bearings, races, floor seal, clock spring, turn signal switch all replaced ~5k miles ago

$150 - Driveshafts - regularly greased. Double cardan replaced ~60k miles ago, carier bearing replaced ~5k ago.

$20 - AC Compressor core

$20 - PS pump core

$20 - Alternator core - or lifetime from autozone we could always swap it out...

$40 - Clutch fan (replaced ~15k ago), and 5year old fan blade assembly

$100 - abs garbage

$80 - HVAC blower, newer fan motor ~3k ago

$100 - rs3200 alarm, 1x oem remote and 1x aftermarket remote

$20ea spare MOOG lower ball joints, and tie rod ends, NEW IN BOX

$150 - Excedy HD clutch kit with flywheel, ~5k miles

Misc interior parts, exterior parts, the frame, cab, bed, etc etc all up for grabs too. Frame is tweaked above fuel tank, frame shop said 400 to fix. Make me an offer. clean title.

--Nick

EDIT - Ill keep updating this post for now until I post to CL.
Click to expand...

Will The rear elocker axle fit my 2wd? It should right?

Greensystemsgo · Mar 22, 2018

tymeson said: ↑

Will The rear elocker axle fit my 2wd? It should right?
Click to expand...

As long as you truly have a prerunner 6 lug truck, yep. Not sure what it will take to remove the harness/switch but I plan to sell all together.

Bradey313 · Mar 22, 2018

Greensystemsgo said: ↑

FULL FUCKING PART OUT

Its finally happening. I have sunk alot of time and money into this black bitch, but I have had enough. Last year my commute drastically increased and I proceeded to find ALMOST every weak component on this bucket. Plus, I was hit 7 times last year in it, but sustained minimal damage (see frame), and three times prior to that in the 5 years ive owned it. It has a bullseye, I just haven't been able to find it to paint over it. It was a very expensive summer. Summer was around 5k miles ago. I can provide more info, pics, package deals, and handys on request. Just PM me. You az guys get first dibs cause I love you. Truck is currently located in Whitman AZ, right by the Ford proving grounds. I have reciepts for all of the new shit, and some for the recently installed shit as well. The engine let go Jan 2nd 2018 and it has been parked since. Upon disassembly I found it needs way more then I am willing to do, especially considering the shape of the cab.

Suspension/Drivetrain stuff

$750 - Rear ELocker axle, 4.10's, drum to drum, with harness. Brakes, bearings, wheel seals within the last 2 years, 3rd resealed ~1000 miles ago, backlash checked and still riding purty.

$250 - (NEW) Nitro gear and axle chromalloy axle shafts, non abs

$400 - Manual Hubs/spindles - Never installed, bought from a guy off of pirate a year or two ago

$400 - Light racing UCA's with greasable ball joints, ~3 years old, Bushings re-lubed (super lube!) every year, 1 ball joint replaced ~6 months ago, have 2x used balljoints, and 1x NEW, along with a spare pass side arm and broken driver side (old set)

$400 - All Pro EXPO leafs - Purchased ~2011, believed to be alcan

$100 - (NEW in box) Bilstein 5125's for the rear, BSN-33-186542

$50 - Biltsein 5125's for the rear, used

$150 - Biltsein 5100's with 750# eibach coils

$150 - Front diff with spacers, useful for a core or yard art. Spiders are blown. Had a spare getting rebuilt, and 'phx rack and axle' has had my spare since October. If you want that one, with spartan, call em up, say your me, and go get it. My loss, your gain.

$50 - Steering rack core - had my spare rebuilt and its sitting at phx rack and axle as well, its been done since october ~300 is what I was quoted, if you want it, its yours. Has warranty through them. I havent picked it up yet. The rack side of things is quick, the axle side not so much.

$300 - Big boy tundra brakes, slotted drilled rotors, ~5k miles on them, come with stainless lines

$50 - OEM brake lines (NEW) to convert to NON-ABS

$150 - chain driven manual tcase

$40 - Aftermarket tcase skid

$40 - OEM ADD cv's, need reseal/rebuild/good oem cores?

$100 - Vatozone cv's, lifetime warranty, we could warranty them out?

Exterior stuff

$800 - ( HOPING TO KEEP BUMPERS TOGETHER, WILL DISCOUNT A PACKAGE DEAL) Front Elite plate bumper with optional high-lift points, optional hoop, custom full hoop, with skid plates - Requires welding/cutting as it replaces the factory mount points, and skid plate tabs must be welded on under truck. Not for the faint of heart, but I assholed a civic and it didnt budge. Check build thread for pics of assholing and subsequent repowdercoating. Comes with mounted shackles, and leds as pictured. For beer I could probably help install.

$500 - Rear elite plate bumper with optional hitch, highlift points, and wraparound. Minor warpage in mounts, but it still sites centered.

$100 - (NEW) Ballistic Fab frame box kit, and tabs to relocate shocks.

$150 - (NEW) Rear swing out kit, 1500# spindle, latch, and pin from Ruffstuff, and wheel mount plate from ballistic.

$1000 - 12x 4runner limited wheels "5 spoke" - 7 or 8 center caps, 7x 285-75-16" Goodyear duratracs, 2x have less then 5k miles and are like new, 2x have ~75% tread left, 1x has ~60% tread, and 2x have ~40% tread left,

$100 - Silver hood, some dents

$125ea - Doors, driver and passenger, driver paint is in GREAT shape. OAK interior, power windows/locks, lifetime tint ~3 years ago

$100ea - fenders, no dents

$300 - High rise camper shell - led third brake light, the start of an interior cage for mounting roof rack and internal stuffs, Rear has recent fiberglass repair and is just primered, rest is old man tan. Newer struts, newer matching locks with keys.

$150 - Newer headlights, corner markers with integrated turn signals, and grill, along with new in toyota bag clips for headlight filler

$80 - Driver side window, spare

$60 - later first gen extended cab side window

$150 - rear slider window, broken latch (~30 from toyota, I never cared as I had a camper

$400 - Smittybilt winch with syth line, original remote, and in cab controls.

Interior stuff

$300 - Front seats, reupholstered around a year ago, comes with saddlemen seat covers that are ~5 months old.

$150 - 2001-2004 white gauge cluster, fits earlier trucks

$100 - 1997-2000 black gauge cluster, dunno what else it fits in

$50 - 2001-2004 center console bezel under radio with 2x cig ligher with good covers, switch blanks have toggles in them, earlier trucks can use both cig lights without any mod.

Mechanical stuff

$300 - R150F - 3gear syncro isnt in best shape, but still shifts decent if you dont try and slam her into third.

$200 - Fuel tank with newew fuel pump ~5k miles and skid plate, newer fuel cap to go along with it ~2k

$300 - 2x ECU, 99 ABS Elocker 5vz MT

$400 - 5vz long block with heads and intake, no accessories, no cylinder ridge, can still see crosshatching, needs assembly (heads are off)

$200 - 5vz long block with heads and intake, no accessories, 280k miles, tired old engine.

$100ea - earlier cable throttle body with cruise, and later 5vz throttle body off of 04

$50 - throttle body that needs to be sent in and bored - maxbore.com

$150 - Steering column with wheel, bearings, races, floor seal, clock spring, turn signal switch all replaced ~5k miles ago

$150 - Driveshafts - regularly greased. Double cardan replaced ~60k miles ago, carier bearing replaced ~5k ago.

$20 - AC Compressor core

$20 - PS pump core

$20 - Alternator core - or lifetime from autozone we could always swap it out...

$40 - Clutch fan (replaced ~15k ago), and 5year old fan blade assembly

$100 - abs garbage

$80 - HVAC blower, newer fan motor ~3k ago

$100 - rs3200 alarm, 1x oem remote and 1x aftermarket remote

$20ea spare MOOG lower ball joints, and tie rod ends, NEW IN BOX

$150 - Excedy HD clutch kit with flywheel, ~5k miles

Misc interior parts, exterior parts, the frame, cab, bed, etc etc all up for grabs too. Frame is tweaked above fuel tank, frame shop said 400 to fix. Make me an offer. clean title.

--Nick

EDIT - Ill keep updating this post for now until I post to CL. I have a number of new OEM seals and other parts I used to carry I still need to go through. Pretty sure I have like 2x spare interior wiring harness, spare dash harness, etc etc.
Click to expand...

Pm'd

llibrm · Mar 22, 2018

Greensystemsgo said: ↑

FULL FUCKING PART OUT

Its finally happening. I have sunk alot of time and money into this black bitch, but I have had enough. Last year my commute drastically increased and I proceeded to find ALMOST every weak component on this bucket. Plus, I was hit 7 times last year in it, but sustained minimal damage (see frame), and three times prior to that in the 5 years ive owned it. It has a bullseye, I just haven't been able to find it to paint over it. It was a very expensive summer. Summer was around 5k miles ago. I can provide more info, pics, package deals, and handys on request. Just PM me. You az guys get first dibs cause I love you. Truck is currently located in Whitman AZ, right by the Ford proving grounds. I have reciepts for all of the new shit, and some for the recently installed shit as well. The engine let go Jan 2nd 2018 and it has been parked since. Upon disassembly I found it needs way more then I am willing to do, especially considering the shape of the cab.

Suspension/Drivetrain stuff

$750 - Rear ELocker axle, 4.10's, drum to drum, with harness. Brakes, bearings, wheel seals within the last 2 years, 3rd resealed ~1000 miles ago, backlash checked and still riding purty.

$250 - (NEW) Nitro gear and axle chromalloy axle shafts, non abs

$400 - Manual Hubs/spindles - Never installed, bought from a guy off of pirate a year or two ago

$400 - Light racing UCA's with greasable ball joints, ~3 years old, Bushings re-lubed (super lube!) every year, 1 ball joint replaced ~6 months ago, have 2x used balljoints, and 1x NEW, along with a spare pass side arm and broken driver side (old set)

$400 - All Pro EXPO leafs - Purchased ~2011, believed to be alcan

$100 - (NEW in box) Bilstein 5125's for the rear, BSN-33-186542

$50 - Biltsein 5125's for the rear, used

$150 - Biltsein 5100's with 750# eibach coils

$150 - Front diff with spacers, useful for a core or yard art. Spiders are blown. Had a spare getting rebuilt, and 'phx rack and axle' has had my spare since October. If you want that one, with spartan, call em up, say your me, and go get it. My loss, your gain.

$50 - Steering rack core - had my spare rebuilt and its sitting at phx rack and axle as well, its been done since october ~300 is what I was quoted, if you want it, its yours. Has warranty through them. I havent picked it up yet. The rack side of things is quick, the axle side not so much.

$20 - (NEW IN BOX) Energy suspension steering rack bushings

$300 - Big boy tundra brakes, slotted drilled rotors, ~5k miles on them, come with stainless lines

$50 - OEM brake lines (NEW) to convert to NON-ABS

$150 - chain driven manual tcase

$40 - Aftermarket tcase skid

$40 - OEM ADD cv's, need reseal/rebuild/good oem cores?

$100 - Vatozone cv's, lifetime warranty, we could warranty them out?

Exterior stuff

$800 - ( HOPING TO KEEP BUMPERS TOGETHER, WILL DISCOUNT A PACKAGE DEAL) Front Elite plate bumper with optional high-lift points, optional hoop, custom full hoop, with skid plates - Requires welding/cutting as it replaces the factory mount points, and skid plate tabs must be welded on under truck. Not for the faint of heart, but I assholed a civic and it didnt budge. Check build thread for pics of assholing and subsequent repowdercoating. Comes with mounted shackles, and leds as pictured. For beer I could probably help install.

$500 - Rear elite plate bumper with optional hitch, highlift points, and wraparound. Minor warpage in mounts, but it still sites centered.

$100 - (NEW) Ballistic Fab frame box kit, and tabs to relocate shocks.

$150 - (NEW) Rear swing out kit, 1500# spindle, latch, and pin from Ruffstuff, and wheel mount plate from ballistic.

$1000 - 12x 4runner limited wheels "5 spoke" - 7 or 8 center caps, 7x 285-75-16" Goodyear duratracs, 2x have less then 5k miles and are like new, 2x have ~75% tread left, 1x has ~60% tread, and 2x have ~40% tread left,

$100 - Silver hood, some dents

$125ea - Doors, driver and passenger, driver paint is in GREAT shape. OAK interior, power windows/locks, lifetime tint ~3 years ago

$100ea - fenders, no dents

$300 - High rise camper shell - led third brake light, the start of an interior cage for mounting roof rack and internal stuffs, Rear has recent fiberglass repair and is just primered, rest is old man tan. Newer struts, newer matching locks with keys.

$150 - Newer headlights, corner markers with integrated turn signals, and grill, along with new in toyota bag clips for headlight filler

$80 - Driver side window, spare

$60 - later first gen extended cab side window

$150 - rear slider window, broken latch (~30 from toyota, I never cared as I had a camper

$400 - Smittybilt winch with syth line, original remote, and in cab controls.

Interior stuff

$300 - Front seats, reupholstered around a year ago, comes with saddlemen seat covers that are ~5 months old.

$150 - 2001-2004 white gauge cluster, fits earlier trucks

$100 - 1997-2000 black gauge cluster, dunno what else it fits in

$50 - 2001-2004 center console bezel under radio with 2x cig ligher with good covers, switch blanks have toggles in them, earlier trucks can use both cig lights without any mod.

Mechanical stuff

$300 - R150F - 3gear syncro isnt in best shape, but still shifts decent if you dont try and slam her into third.

$200 - Fuel tank with newew fuel pump ~5k miles and skid plate, newer fuel cap to go along with it ~2k

$300 - 2x ECU, 99 ABS Elocker 5vz MT

$400 - 5vz long block with heads and intake, no accessories, no cylinder ridge, can still see crosshatching, needs assembly (heads are off)

$200 - 5vz long block with heads and intake, no accessories, 280k miles, tired old engine.

$100ea - earlier cable throttle body with cruise, and later 5vz throttle body off of 04

$50 - throttle body that needs to be sent in and bored - maxbore.com

$150 - Steering column with wheel, bearings, races, floor seal, clock spring, turn signal switch all replaced ~5k miles ago

$150 - Driveshafts - regularly greased. Double cardan replaced ~60k miles ago, carier bearing replaced ~5k ago.

$20 - AC Compressor core

$20 - PS pump core

$20 - Alternator core - or lifetime from autozone we could always swap it out...

$40 - Clutch fan (replaced ~15k ago), and 5year old fan blade assembly

$100 - abs garbage

$80 - HVAC blower, newer fan motor ~3k ago

$100 - rs3200 alarm, 1x oem remote and 1x aftermarket remote

$20ea spare MOOG lower ball joints, and tie rod ends, NEW IN BOX

$150 - Excedy HD clutch kit with flywheel, ~5k miles

Misc interior parts, exterior parts, the frame, cab, bed, etc etc all up for grabs too. Frame is tweaked above fuel tank, frame shop said 400 to fix. Make me an offer. clean title.

--Nick

EDIT - Ill keep updating this post for now until I post to CL. I have a number of new OEM seals and other parts I used to carry I still need to go through. Pretty sure I have like 2x spare interior wiring harness, spare dash harness, etc etc.
Click to expand...

@Chipskip

Chipskip · Mar 22, 2018

llibrm said: ↑

@Chipskip
Click to expand...

All my money is tied up, otherwise I want those Elite bumpers.

Aw9d · Mar 22, 2018

Onkyo TR-SR674 HDMI ports do not work. Everything else is fully functional. This is a great garage or backyard receiver. I just don't need anymore got a new one for my bedroom. Ocotillo can repair the HDMI ports. I took a look at it it wasn't something I wanted to tackle.

FREE if you pick it up. Located in Chandler. Sleeping dog not included.

RPain · Mar 22, 2018

Aw9d said: ↑

Onkyo TR-SR674 HDMI ports do not work. Everything else is fully functional. This is a great garage or backyard receiver. I just don't need anymore got a new one for my bedroom. Ocotillo can repair the HDMI ports. I took a look at it it wasn't something I wanted to tackle.

FREE if you pick it up. Located in Chandler. Sleeping dog not included.

Click to expand...

dibs

bkrdave36 · Mar 22, 2018

I broke my driver side stock taillight lens on my 06 (Stoopid HiLift jack!)
Anyone have an extra one I can buy?

Thanks

Aw9d · Mar 22, 2018

RPain said: ↑

dibs
Click to expand...

All yours. Pm for address

cmack · Mar 22, 2018

Aw9d said: ↑

All yours. Pm for address
Click to expand...

Make sure and splooge all over it before you give it to him

Greensystemsgo · Mar 22, 2018

cmack said: ↑

Make sure and splooge all over it before you give it to him
Click to expand...

inside of it, down in between the caps so it smells nice and sweet/pungent when it warms up.

cmack · Mar 22, 2018

Greensystemsgo said: ↑

inside of it, down in between the caps so it smells nice and sweet/pungent when it warms up.
Click to expand...

Not your first rodeo eh?

snowtank · Mar 22, 2018

Aw9d said: ↑

Onkyo TR-SR674 HDMI ports do not work. Everything else is fully functional. This is a great garage or backyard receiver. I just don't need anymore got a new one for my bedroom. Ocotillo can repair the HDMI ports. I took a look at it it wasn't something I wanted to tackle.

FREE if you pick it up. Located in Chandler. Sleeping dog not included.

Click to expand...

Ah fuck

RPain · Mar 22, 2018

cmack said: ↑

Make sure and splooge all over it before you give it to him
Click to expand...

splooged on your floor mats

Greensystemsgo · Mar 22, 2018

cmack said: ↑

Not your first rodeo eh?
Click to expand...

I like to party.

02YotaGuy · Mar 22, 2018

Sounds like someone is getting the same treatment that @DukesTaco is giving my Cruiser.

Aw9d · Mar 22, 2018

snowtank said: ↑

Ah fuck
Click to expand...

You should know if you need anything audio odds are I have a something or another laying around. I got another one laying around. Older but still good for a garage.

snowtank · Mar 22, 2018

Aw9d said: ↑

You should know if you need anything audio odds are I have a something or another laying around. I got another one laying around. Older but still good for a garage.
Click to expand...

I just need it for the garage is all. I know you usually do. Just have never thought about it

TacoCart · Mar 22, 2018

Anyone selling a set of mehod NV wheels?

Log in or Sign up

Welcome to Tacoma World!

AZ Classifieds

#32941
tymeson Let's ride

#32942
tymeson Let's ride

#32943
Greensystemsgo 1 owner with clean car fox.

#32944
Bradey313 Active Member

#32945
llibrm OH NOOOOOO!

#32946
Chipskip N7MCS

#32947
Aw9d That one guy

#32948
RPain Well-Known Member

#32949
bkrdave36 Well-Known Member

#32950
Aw9d That one guy

#32951
cmack Well-Known Member

#32952
Greensystemsgo 1 owner with clean car fox.

#32953
cmack Well-Known Member

#32954
snowtank Where the fuck did my beer go!

#32955
RPain Well-Known Member

#32956
Greensystemsgo 1 owner with clean car fox.

#32957
02YotaGuy Guy With A Red 80 Series

#32958
Aw9d That one guy

#32959
snowtank Where the fuck did my beer go!

#32960
TacoCart Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

AZ Classifieds

#32941 tymeson Let's ride

#32942 tymeson Let's ride

#32943 Greensystemsgo 1 owner with clean car fox.

#32944 Bradey313 Active Member

#32945 llibrm OH NOOOOOO!

#32946 Chipskip N7MCS

#32947 Aw9d That one guy

#32948 RPain Well-Known Member

#32949 bkrdave36 Well-Known Member

#32950 Aw9d That one guy

#32951 cmack Well-Known Member

#32952 Greensystemsgo 1 owner with clean car fox.

#32953 cmack Well-Known Member

#32954 snowtank Where the fuck did my beer go!

#32955 RPain Well-Known Member

#32956 Greensystemsgo 1 owner with clean car fox.

#32957 02YotaGuy Guy With A Red 80 Series

#32958 Aw9d That one guy

#32959 snowtank Where the fuck did my beer go!

#32960 TacoCart Member

Products Discussed in Entire Site Forum: Arizona Thread: AZ Classifieds

#32941
tymeson Let's ride

#32942
tymeson Let's ride

#32943
Greensystemsgo 1 owner with clean car fox.

#32944
Bradey313 Active Member

#32945
llibrm OH NOOOOOO!

#32946
Chipskip N7MCS

#32947
Aw9d That one guy

#32948
RPain Well-Known Member

#32949
bkrdave36 Well-Known Member

#32950
Aw9d That one guy

#32951
cmack Well-Known Member

#32952
Greensystemsgo 1 owner with clean car fox.

#32953
cmack Well-Known Member

#32954
snowtank Where the fuck did my beer go!

#32955
RPain Well-Known Member

#32956
Greensystemsgo 1 owner with clean car fox.

#32957
02YotaGuy Guy With A Red 80 Series

#32958
Aw9d That one guy

#32959
snowtank Where the fuck did my beer go!

#32960
TacoCart Member

Products Discussed in