South Carolina BS thread under new MANAGEMENT and lives in SC

Ya'll are confused it's ok! My truck is back at the dealer today for actual inspector dude to do the paper work with Toyota and take some more pics. They said I'll be getting my truck back and supposedly the service writer ordered my frame along with all new hard brake lines, and a bunch of bolts and stuff. But he did say that they have a second updated frame (guess the coating) and he ordered that one. IDK he could just be bsing me.

 

I'm on 285s and barely rub each truck is different.

 

Don’t like the look of tall skinnies. Even if I lift her more like an inch I couldn’t fit 285’s? Would 265’s be the max with current set up?

 

What’s your left set up?

 

But he's on 37s now!

 

Click my build thread it's on the first post.

 

I was comparing mine to Bootyfreaks

 

Heard some horror stories about spacers don’t want them on my truck

 

Trying to do this on a budget if I can get 32’s on I’d be happy. Just want to beef her up some without spending a shit Ton of money. If not I’ll just do the 265/75’s

 

Wheel spacers are fine as long as you get good quality ones and put them on correctly. But what Scott said is it changes your wheel offset so to speak so the rubbing areas change because it changes where your scrub radius is. Also alignment can play a roll in this as well. There are a bunch of calculations you can do to figure all this out.

 

265/75 Street tires, 255/85 offroad

 

AT. Do most my driving on street

 

No, I was at the mod meet but BB&T crashed that week and my bank accnt got all screwed up. Thankfully though I didn't because my frame is getting replaced now. I think I am going to go a different route with the CM stuff. But it will be done with Eddy if he can squeeze me in his busy schedule.

 

Was thinking falken wildpeak and or Toyo open country

 

But the 265s look like baby tires on a lifted truck . The 255/85 are good that is what Jimbo is running as well.

 

Got any pics?

 

Yeah Tim noticed it Sat. I crawled around all under the truck when I bought it and everything was covered in undercoat and I did not see the holes then. Part of the recall was if it doesn't fail undercoat it and I was told that is what was done. But I think the undercoating was holing parts of the frame together. They are huge holes.

 

congrats!

 

You couldn't of had them put the white letters to the inside?