1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Is this a engine air filter anyone has used? Any disposable air filter recommendations in general? Dealer replaced spark plugs and now check engine light is on Needle Bearing vs. ECGS For those adding a fuel tank skid to a non-TRDOR... Truck rack clamps 4runner TRD Wheels for 3rd gen Tacoma?

3rd Gen LED reverse pods

Discussion in '3rd Gen. Tacomas (2016-2023)' started by chadabear, Mar 23, 2018.

Page 4 of 9
  1. Mar 28, 2018 at 8:16 AM
    #61
    Stuart762

    #61
    Stuart762 Well-Known Member

    Joined:
    Jul 26, 2017
    Member:
    #225054
    Messages:
    131
    Gender:
    Male
    First Name:
    Stuart
    North Bay
    Vehicle:
    Super White 17 TRD OR DCSB MT
    Grill, Snug Top, BAMF skid trilogy, diff skid, and BAMF sliders. TRD grill emblem, O.C.D. center console tray, matte black Tacoma tailgate insert, Rigid Ignites flush mounted inside white bumper caps, vinyl blacked out dash chrome, red meso ultimate map and dome lights, ultimate turn signals, gasshole, and FH group seat covers.($53) King Coilovers, JBA UCA’s, Front driver CV bushing. BAMF shock relocation kit w/ 12” x 2.5” adj. kings. Deaver U402 leaf pack, w/u-bolt flip kit. OME driveshaft support bearing spacer. Aluminum oil filter housing w/fumoto valve. Braided Stainless Steel extended brake lines front and rear.
    104$ Amazon for the lights
     
    Stuart762, Mar 28, 2018
    #61
  2. Mar 28, 2018 at 8:18 AM
    #62
    Parker315

    #62
    Parker315 Modding on a Budget | TTC Member #0127

    Joined:
    Dec 27, 2017
    Member:
    #239512
    Messages:
    1,392
    Gender:
    Male
    First Name:
    Brett
    Cypress Texas
    Vehicle:
    17 Tacoma TRD Sport DCSB MGM
    TTC (Texas Toyota Coalition) Member #127
    Parker315, Mar 28, 2018
    #62
    RobP62 likes this.
  3. Mar 28, 2018 at 9:31 AM
    #63
    Stuart762

    #63
    Stuart762 Well-Known Member

    Joined:
    Jul 26, 2017
    Member:
    #225054
    Messages:
    131
    Gender:
    Male
    First Name:
    Stuart
    North Bay
    Vehicle:
    Super White 17 TRD OR DCSB MT
    Grill, Snug Top, BAMF skid trilogy, diff skid, and BAMF sliders. TRD grill emblem, O.C.D. center console tray, matte black Tacoma tailgate insert, Rigid Ignites flush mounted inside white bumper caps, vinyl blacked out dash chrome, red meso ultimate map and dome lights, ultimate turn signals, gasshole, and FH group seat covers.($53) King Coilovers, JBA UCA’s, Front driver CV bushing. BAMF shock relocation kit w/ 12” x 2.5” adj. kings. Deaver U402 leaf pack, w/u-bolt flip kit. OME driveshaft support bearing spacer. Aluminum oil filter housing w/fumoto valve. Braided Stainless Steel extended brake lines front and rear.
    Yeah buying two whites was a little higher
     
    Stuart762, Mar 28, 2018
    #63
    RobP62 likes this.
  4. Mar 28, 2018 at 10:29 AM
    #64
    16tacoblue

    #64
    16tacoblue Well-Known Member

    Joined:
    Nov 12, 2015
    Member:
    #169430
    Messages:
    66
    Gender:
    Male
    Vehicle:
    2016 sport taco
    Colored chrome fenders name plates & tailgate emblem flat black.
     
    16tacoblue, Mar 28, 2018
    #64
    chadabear[QUOTED][OP] likes this.
  5. Mar 28, 2018 at 10:47 AM
    #65
    here4cake

    #65
    here4cake Well-Known Member

    Joined:
    Nov 19, 2017
    Member:
    #236447
    Messages:
    639
    If you want backup lights, the 20641 is a better option (have them in my own bumper):
    $152 RIGID INDUSTRIES Ignite Backup Kit Black Flood Flush Mount: Mounting Accessories For Offroad Use
    https://www.amazon.com/gp/product/B01HJ4G9QI/ref=oh_aui_detailpage_o00_?ie=UTF8&psc=1
     
    here4cake, Mar 28, 2018
    #65
    Parker315[QUOTED] likes this.
  6. Mar 28, 2018 at 10:56 AM
    #66
    ferntr33

    #66
    ferntr33 Well-Known Member

    Joined:
    Dec 10, 2017
    Member:
    #238159
    Messages:
    601
    Gorilla tape is way cleaner than wire silly. Or do what people do around here and drill holes and thread it on with the bailing wire and put a sticker next to it saying drift scars.
     
    ferntr33, Mar 28, 2018
    #66
    RobP62 likes this.
  7. Mar 28, 2018 at 11:04 AM
    #67
    chadabear

    #67
    chadabear [OP] Well-Known Member

    Joined:
    Feb 17, 2009
    Member:
    #13746
    Messages:
    581
    Gender:
    Male
    First Name:
    Chad
    Louisiana
    Vehicle:
    2018 DCSB 4x4
    @16tacoblue I did that myself with plastidip to see if I liked it or not. I plan to paint both bumper caps and that same spot on the tailgate professionally, with black base and a true flat clear.
     
    chadabear, Mar 28, 2018
    #67
    16tacoblue likes this.
  8. Mar 28, 2018 at 12:06 PM
    #68
    Stuart762

    #68
    Stuart762 Well-Known Member

    Joined:
    Jul 26, 2017
    Member:
    #225054
    Messages:
    131
    Gender:
    Male
    First Name:
    Stuart
    North Bay
    Vehicle:
    Super White 17 TRD OR DCSB MT
    Grill, Snug Top, BAMF skid trilogy, diff skid, and BAMF sliders. TRD grill emblem, O.C.D. center console tray, matte black Tacoma tailgate insert, Rigid Ignites flush mounted inside white bumper caps, vinyl blacked out dash chrome, red meso ultimate map and dome lights, ultimate turn signals, gasshole, and FH group seat covers.($53) King Coilovers, JBA UCA’s, Front driver CV bushing. BAMF shock relocation kit w/ 12” x 2.5” adj. kings. Deaver U402 leaf pack, w/u-bolt flip kit. OME driveshaft support bearing spacer. Aluminum oil filter housing w/fumoto valve. Braided Stainless Steel extended brake lines front and rear.
    If you have any input/picture on how you mounted yours in the mirror assembly you did, it would be much appreciated I pm’d you, when I first thought of doing this, but I know you’re a busy man so I didn’t want to bug you and just thought I’d figure it out myself
     
    Stuart762, Mar 28, 2018
    #68
  9. Mar 28, 2018 at 12:08 PM
    #69
    MESO

    #69
    MESO Major Modder Vendor

    Joined:
    Feb 16, 2015
    Member:
    #148809
    Messages:
    16,294
    Gender:
    Male
    State of Jefferson
    Vehicle:
    2016 DCLB TRD HELLCAT SWAP
    I used the bracket that came on the ignites. Your application is going to be a little different because I don't know if here is anything flat to mount the light to behind the bumper cap. But IMO I would not rely on mounting it to the bumper cap itself. Make a bar/bracket that mounts behind it for more stability.
     
    MESO, Mar 28, 2018
    #69
    RobP62 likes this.
  10. Mar 28, 2018 at 1:57 PM
    #70
    2ayne

    #70
    2ayne Well-Known Member

    Joined:
    Oct 1, 2015
    Member:
    #165609
    Messages:
    821
    Gender:
    Male
    First Name:
    Zayne
    Ohio
    Vehicle:
    2017 Cement TRD Pro
    2ayne, Mar 28, 2018
    #70
    RobP62 likes this.
  11. Mar 28, 2018 at 2:33 PM
    #71
    SR5 BRI

    #71
    SR5 BRI Brian Good Sport

    Joined:
    Dec 29, 2015
    Member:
    #173454
    Messages:
    1,435
    Gender:
    Male
    First Name:
    Brian
    Albany n.y.
    Vehicle:
    2023 Sport Quadcab
    Alot
    Yes the Rigid Ignites are the ticket20180110_043401_001.jpg Also Putco BLADE . Nice install on the bumper Op
     
    Last edited: Mar 28, 2018
    SR5 BRI, Mar 28, 2018
    #71
  12. Mar 28, 2018 at 2:55 PM
    #72
    2ayne

    #72
    2ayne Well-Known Member

    Joined:
    Oct 1, 2015
    Member:
    #165609
    Messages:
    821
    Gender:
    Male
    First Name:
    Zayne
    Ohio
    Vehicle:
    2017 Cement TRD Pro
    Seems like a lot of you are putting them more towards the center on the larger black plastic rather than the corner pieces.
    Seems like it might be hard to make them look right on the corner sections since they aren’t exactly level lines.
    I take it there is no interrance with the licence plate lights?

    https://www.tacomaworld.com/threads/rigid-industries-ignite-led.453588/
     
    2ayne, Mar 28, 2018
    #72
    RobP62 likes this.
  13. Mar 28, 2018 at 5:12 PM
    #73
    here4cake

    #73
    here4cake Well-Known Member

    Joined:
    Nov 19, 2017
    Member:
    #236447
    Messages:
    639
    [​IMG]

    [​IMG]
     
    here4cake, Mar 28, 2018
    #73
    Dctaconny, Bigdaddy4760 and SR5 BRI like this.
  14. Mar 28, 2018 at 5:17 PM
    #74
    2ayne

    #74
    2ayne Well-Known Member

    Joined:
    Oct 1, 2015
    Member:
    #165609
    Messages:
    821
    Gender:
    Male
    First Name:
    Zayne
    Ohio
    Vehicle:
    2017 Cement TRD Pro
    Nice!!!
     
    2ayne, Mar 28, 2018
    #74
    Bigdaddy4760 likes this.
  15. Mar 28, 2018 at 6:01 PM
    #75
    johntoyota

    #75
    johntoyota "I'm higher than you'll ever be." -Treetop

    Joined:
    Mar 11, 2016
    Member:
    #180956
    Messages:
    5,249
    Gender:
    Male
    First Name:
    John
    Down yonder in TN
    Vehicle:
    16 truck
    Im curious about how the wiring works. I have done this in the past with some Tractor Supply lights simply splicing into the reverse wire like the OP did here but I am wondering since these are LED and all that, and since they try to sell you a wiring harness with a relay on the same page, if a relay is needed. I guess you could still use the reverse light as power to trigger the relay but is it necessary?
     
    johntoyota, Mar 28, 2018
    #75
  16. Mar 28, 2018 at 7:04 PM
    #76
    chadabear

    #76
    chadabear [OP] Well-Known Member

    Joined:
    Feb 17, 2009
    Member:
    #13746
    Messages:
    581
    Gender:
    Male
    First Name:
    Chad
    Louisiana
    Vehicle:
    2018 DCSB 4x4
    I had the pods on my 08 for 3 years, wired exactly the same way, never had an issue. Haven't had one uet w these new ones.
     
    chadabear, Mar 28, 2018
    #76
  17. Mar 28, 2018 at 7:37 PM
    #77
    Stuart762

    #77
    Stuart762 Well-Known Member

    Joined:
    Jul 26, 2017
    Member:
    #225054
    Messages:
    131
    Gender:
    Male
    First Name:
    Stuart
    North Bay
    Vehicle:
    Super White 17 TRD OR DCSB MT
    Grill, Snug Top, BAMF skid trilogy, diff skid, and BAMF sliders. TRD grill emblem, O.C.D. center console tray, matte black Tacoma tailgate insert, Rigid Ignites flush mounted inside white bumper caps, vinyl blacked out dash chrome, red meso ultimate map and dome lights, ultimate turn signals, gasshole, and FH group seat covers.($53) King Coilovers, JBA UCA’s, Front driver CV bushing. BAMF shock relocation kit w/ 12” x 2.5” adj. kings. Deaver U402 leaf pack, w/u-bolt flip kit. OME driveshaft support bearing spacer. Aluminum oil filter housing w/fumoto valve. Braided Stainless Steel extended brake lines front and rear.
    There will definitely be some type of bracket, attached to the bumper stay, I was dumb and modified the two stays that came with the bumper I bought, so now I have to remove the ones from my truck. In hind sight it would have been easier to modify the ones on the truck. Live and learn. Question: in order to mount these lights in your mirrors you had to lose the cover that comes on them stock correct? To achieve the flush mount look. If so how did you reseal them?
     
    Stuart762, Mar 28, 2018
    #77
    RobP62 likes this.
  18. Mar 30, 2018 at 12:23 PM
    #78
    Parker315

    #78
    Parker315 Modding on a Budget | TTC Member #0127

    Joined:
    Dec 27, 2017
    Member:
    #239512
    Messages:
    1,392
    Gender:
    Male
    First Name:
    Brett
    Cypress Texas
    Vehicle:
    17 Tacoma TRD Sport DCSB MGM
    TTC (Texas Toyota Coalition) Member #127

    Just purchased these for my Tacoma. Nice find and great write up.

    I’m gonna wire these up to a push switch though so I can turn them on and off as needed.

    I purchased the following with these pods.

    CH4x4 Push Switch for Toyota Tacoma - Rear Lights Symbol - Blue Led
    $24 CH4X4 Push Switch for Toyota Tacoma 12V 3Amp - Rear Lights Symbol - Blue Led
    https://www.amazon.com/dp/B01H5UD13K/ref=cm_sw_r_cp_api_06OVAb3FSSJEB

    14 AWG 20 ft OZ-USA 2 Wire 12v 24v cable car truck marine boat light led bar electrical wiring industrial
    $27 14 AWG 20 ft OZ-USA® 2 Wire 12v 24v Cable car Truck Marine Boat Light led bar Electrical Wiring Industrial
    https://www.amazon.com/dp/B0764S8CDM/ref=cm_sw_r_cp_api_s6OVAb7QMDCMM
     
    Parker315, Mar 30, 2018
    #78
    Dirty Harry, Jumpman23, ToyoDrew and 2 others like this.
  19. Mar 30, 2018 at 12:42 PM
    #79
    RobP62

    #79
    RobP62 NVR20LD

    Joined:
    Jun 4, 2017
    Member:
    #220718
    Messages:
    41,519
    Gender:
    Male
    First Name:
    Rob
    Street, Md.
    Vehicle:
    TTC Member #0125
    NOICE! Take notes. I will need a lot! :D
     
    RobP62, Mar 30, 2018
    #79
    Parker315[QUOTED] and chadabear[OP] like this.
  20. Mar 30, 2018 at 3:07 PM
    #80
    Parker315

    #80
    Parker315 Modding on a Budget | TTC Member #0127

    Joined:
    Dec 27, 2017
    Member:
    #239512
    Messages:
    1,392
    Gender:
    Male
    First Name:
    Brett
    Cypress Texas
    Vehicle:
    17 Tacoma TRD Sport DCSB MGM
    TTC (Texas Toyota Coalition) Member #127
    I’m honestly gonna try and do a video of the install if possible. At the very least take lots of photos. @chadabear did a good write up though. I think @ToyoTacoTurner and @Jumpman23 are gonna come over help me do a few of the mods.
     
    Parker315, Mar 30, 2018
    #80
    McFlysRide, ToyoTacoTurner, Dirty Harry and 4 others like this.
Page 4 of 9
To Top