Norcal Spotted and BS Thread

Tech Deck Xtreme + RAM Model Specific Form-Fitted Cradle If you go with the Ram stuff, stay away from the X mounts.

 

What’s wrong with the X mounts?

 

the EDDO has spoken!

 

Just found the arms a bit flimsy if one is not careful around them. Which I was not. Can't bend the purpose-built stuff they sell.

Thought I'd offer an opinion. Cue joke about opinions being like assholes...

 

FIFY

 

I need to get something for the phone mount in the taco. Used magnetic on my old phone attached to vent. Worked great until you had full a/c or heat on. Then the phone would start acting coo-coo...


In the CRV my iphone wedges perfectly between the climate knob and the bottom of stereo. No holder needed

 

Can anyone confirm these are the correct u-joints here before I order?

Rear DS:
(3) Spicer 5-213X

$26 Spicer 5-213X U-Joint Kit 1330 Series (OSR)

https://www.amazon.com/dp/B00DOI8TQ...olid=2PTBSGLE82XME&psc=0&ref_=lv_ov_lig_dp_it

Front DS:
(2) Spicer 5-153X

$23 Spicer 5-153X U-Joint Kit 1310 Series (OSR)

https://www.amazon.com/dp/B000CKN76...olid=2PTBSGLE82XME&psc=0&ref_=lv_ov_lig_dp_it

Amazon says does not fit, but wtf do they know.

 

Some of us can only aspire to be blue royalty.

 

Thank you all for your replies. I'm not gonna quote because that would be obnoxious. I don't believe the tech deck is an option for me because #firstgenprobs. I'll do some window shopping and get back to ya. Leaning toward the mob as the ram mount mounted to the a pillar is kinda pricey. If I remember right it's over $60. Or maybe more.

 

glob of semen. slap it on the back of the phone and stick where you please. Been holding up great.

pics?

 

Mine works ok for street but off road it falls off on big bumps. Magnetic one but its under my rubber cover

 

Where do you keep your purse and dignity?

 

Over my shoulder and on the floor, respectively

 

I just got out bid on a house in Roseville, we offered 8k over asking figured it was ours. guy from the Bay area offered 50k cash over the appraisal price.

 

Well my decision just got harder. Mob mount is roughly the same price as doing the a pillar mount. Question about the mob mount @DannyBFresco @LTDSC : do you have to adjust the back knob every time you take the phone out/ put it in? Or is it fairly easy?

 

for daily use i leave it loose, it doesnt move around and lowers back down on itself. For offroad i put it in place and tighten the knob.

Its easy when i need to get out and snag a pic for the gram

 

I have this as well. I place my gopro there.

 

What I have found with the x mounts is the rubber cushion on the arm wears out then you deal with metal sticking out. Once the xmount for my phone is done I will look into a different type of holder for the phone. The one thing that I do like about them is they don't obstruct the inputs on the iphone.

 

same. leave the knob a little loose and its strong enough to hold the phone in without issues but still quick to remove. off road --> > clock it down.

 

Does anyone who had the mob mount have a S8?
My concern is the aux cord on the phone is on the lower left side and the mount may block it....