Getting Vibrations After Lift - Go To Dealer

Im a construction worker by trade so am definately handy but without previous experience with automotives, its hard to be sure im doing it right

 

Yep 4wd still has vibration. Im on 32” and rays

 

Heres my rig. 4 wheel parts installed the lift but sometimes i question thier knowledge

 

ok then you have 2 possible causes. driveshaft angle or wheels and tires. I would try the cb drop for 20 bucks and 5 minutes to install and see what happens. I fought vibes on my lifted dually for years. it sucked. I was so nervous to lift this Tacoma for that reason. fortunately I can barely feel any, and it's probably just paranoia from the hell I had on my dually

 

I dont think its tires cuz its the same setup before the lift, jusr different wheels and i dont remember this vibration before

 

looks great man! honestly as simple as these kits are to install it's probably not the install.

 

Thnx man. And thanks for pointing me in some direction.

 

no problem. if that doesn't take care of it, pm me and I can give you some other ideas to try to rule out some things

 

Just watched a youtube video on it. Omg. Simple as hell. Will get on this tmmrw if i can just order the kit out of 4 wheel parts

 

Check the torque on the wheels and then the balance before Ya get too crazy, Ya never know.

 

Just had the lugs changed cuz of rust and rebalanced a couple months back due to one of tge wieghts falling off didnt know which wheel so they balanced them all