NJ B.S. Thread

We’re you in jersey at all? Could be electrical corrosion

 

I’ll probably run it inside the frame or right along the frame. With that much power just want to take precautions. Also the points of retention will work on the cable over time.

 

Honestly don't know... It worked when I got the truck back from the frame swap - I tried out the lockers.
Flick the switch and zilch, the symbol won't even light up but the switch is still backlit with the dash lights...

 

That said, I have killed the pressure reg switch before... Jumped that and it ran no problem. May try that first.

 

@deeezy relocated the battery to the bed, which I’d like to do as well one day. Here’s how he did it. He’s also pretty good at getting back to any questions you might have..

https://www.tacomaworld.com/threads...ery-getter-build.342010/page-74#post-13863020

 

This is the one that’s inspiring me (without the dual set-up). I tend to remove the bed often by using an engine hoist and driving out from underneath (the reverse for reinstalling) which is why I’m looking to mount in the cab. Everything is nice and protected too.

 

Wow. That’s an impressive setup!

 

Yeah, nicest I’ve seen. That plus the work @tacozord does are guiding me along. https://www.tacomaworld.com/threads/boden-build-2015-dclb-4x4.362640/page-3#post-10274246

 

Your post got me spraying all types of shit down under the hood today..

 

I need a long break from this website, too many "know-it-alls"

 

I Kno nothing

 

At all

 

I knew you were going to say that.

 

Jimmy - This spring, when I get a chance, I'm gonna pull all my armor to de-rust and respray.

Will this Rustoleum Truck Bed Coating still work of I don't go back to bare metal? I just want to remove rust, clean the armor well with acetone or similar and spray over the current regular Rustoleum paint. Going back to bare metal is too much work.

 

Need to do this as well. Wonder if it'll adhere fine.

 

I’ve painted over paint with it. Works fine. It’s really just textured paint if you ask me.

And, you did. So...

 

OK. Will order 8 cans from here to cover the free shipping minimum.

Thanks

 

Actually, that stuff is meant to be sprayed in a painted truck bed. Scuff, clean, spray are the instructions I believe.

Longevity will be determined by the prep done before the previous paint job.

 

Gotcha. That's what I'll do. Scuffing is mucho importante.

 

@diabetiktaco my Truck has only even been on the beach once