Mid and long travel installs, tube bumpers, sliders, bed rack’s, cmc's, shock hoops & welding So cal

Reworked a 4Runner swing out that made by another company that kept cracking. Reinforced all the damaged areas and bent up a new tire carrier. Kept it simple and added a rotopax mount as well.


The tire carrier that kept cracking



Tire carrier after rebuild. All tubing used is DOm and plate is CR.

 

Installed king coilovers, Icon billet delta joint uca’s, brake lines, bump stops, and gusseted a set of spindles for a third gen.

 

Are those real hubs?

 

No. It’s the method center cap

 

Great work as always!

 

@staticprotocol13 this is his thread

 

I’ve been swamped for the last few weeks with long travel installs, bypass, installs cam tabs and cmc’s. Here’s a few pics.


Lt install on @inv3ctiv3’s rig







Next photo was taken by Jim




Did bypass install, bump stop relocation, cmc, gusseted and installed spindles, installed cam tab gussets and performed an exhaust reroute on @locster’s truck













Just to give you an idea of how many cmc’s we’ve been doing lately. This was a full 2’x5’ sheet of steel three weeks ago.



Now it’s a whole bunch of these

 

Anything is possible. But I currently just don’t have the time to deal with shipping large items. I already work at my day job from 5am to 3pm and the shop from 3:30 pm to 9 or 10pm. And even with those hours I can’t get to every project I’m approached about. Shipping would just get in the way of that. If the buyer wants to work out shipping details and has the freight company pick up from the shop I would gladly entertain the idea of shipping. But if I have to quote everything and do all the shipping leg work it takes away from the time I spending building and that’s the time I enjoy most.

 

How much to weld leaf perches onto a tundra axle? I have the perches. @glorifiedwelder

 

I sent a message back in January and haven't got a response.

 

He’s busy with lots of these projects and a busy day job, plus all the other stuff that comes with life. He probably just missed your message. He does great work and is worth the wait

 

Ya I'm guessing he missed it. He sent a message today now just waiting on his reply.

 

I didn’t reply to it because you also texted me in January with the same question which I answered via text.

 

Thanks Jeff

 

A little work from yesterday. Cam tabs and a few sets of spindles

I did not do the assybly welding of the cam tabs, just welded them to the frame.








Non swaybar gussets







Swaybar gussets

 

@glorifiedwelder I sent you a message about a cmc. Let me know when you get a chance. Thanks!

 

Replied

 

Last night I removed the old single hoop and replaced it with a larger main hoop and headlight hoops.

 

I messaged you back.

BTW, is PM the best way to contact you or text, call, etc? Let me know. Thanks!

 

Texting me at (661)312-2340 is the best method. I’ve been super busy lately and haven’t been making it on TW as much