What Have You Done To Your 3rd Gen Today?

285/70/17. Most of the rubbing is gone. Had some on the cab mount, plastic fender well liner, fender well pinch weld, etc. Lots of trimming, cutting, melting, etc.

 

I have not bought it but it's 800 bucks for the flash drive which overrides your truck ecu's shift points.

 

In a million posts I've read this the first time I've seen those tires! Way cool. Have you ever run them before? What's your take?

 

Looks great Jeff!

 

It's a little more then that. Yes you get flash drive but you also get the OBD II interface and there is more to the software then just over riding the ecu shift points.
Yes there is a file for remapping of the shift points for the transmission (TCU) but you also get files for remapping the engine control unit (ECU) and THAT is what makes it well worth the money.
You get a load for 87 octane gas and a load for 91 octane gas. You are able to switch these up at your desire. After buying and installing this on my truck I feel Toyota owes me the cost of this mod because this is how the truck should have run from the factory. Very much improved. If you go to the thread I don't believe you will find anyone who regrets buying this. Oh, and they are always tweeking and refinin the ECU & TCU mapping and all future updates are free if you wish to use them.

 

I was generalizing not trying to sell the product.

 

Yea, if they do 20% off then the Elites should be $119 with shipping, because I read they charge $15 for that. $95 for the Plus with shipping. Stainless looks cool but I'm not sure its worth the $24 extra for a part under the hood. If they do the discount and free shipping then I'm all over the Elites. I think they also did a $30 off sale once too. Brings the Elites down to $115. Now were splitting hairs. However, $85 for the Plus is a tremendous price!

Either way I know now its something I want to do.

 

1st time member long time lurker with my previous taco. Half way done trying to get rid of the rubbing after installing the BFG K02's 265/75R16 with SCS F5's.

 

Looks great! Welcome to the forum

 

I got mine from Amazon for $99.95 shipped. That as for the black units.

 

Yea, I guess that's the route to go if the sale or group buy doesn't happen.

 

Couldnt find one that would fit in my Gasshole... I TRIED!!!!

 

OK Taco lovers, This weekend I installed my Supreme Suspensions - Toyota Tacoma Lift Kit 1.5" - 2" Rear Suspension Lift Carbon Steel

$190 Add-A-Leaf Kit for 1995-2023 Toyota Tacoma - 21.5" Short AAL Set with Isolator Pads and Square Bend U-Bolts

Add-A-Leaf Kit (Short 24") + U-Bolts and now my truck measures 3/4" taller at the right read fender then the left rear fender. I hoping the AAL's will settle in and level out but has anyone seen this before?

I still have to install the front lift - didn't have time this weekend but I will say, I like driving the truck with this new rake. Unfortunately I need to lift the front due to Dirty 3s trying to eat the truck at about 7/8 full turn.

 

What I did this weekend...

 

Hell yea!!! Great game! Playoff spot secured!

 

Go Thunder!!!

 

Where you get the rip city sticker at? I need one!

 

I got it at the game Going again on Wednesday the 11th. I can pick you up one. PM me your address and I’ll send it to you

 

First time using the GassHole. Worked like a charm.