TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

I personally have mine wired the exact opposite. But polarity isn’t supposed to matter.

 

Maybe it wasnt fully plugged in the ucon @HolyHandGrenade

 

I'd switch it to go red-red just based on my mild ocd.

 

Could be. I didn’t remove the UCON to plug in the harness. I called Gadget and he said it needs to be centered in the plug, with the tab facing the passenger side. That’s how it is and I can’t pull it out, so I assume it’s plugged in.

Good point though. I guess I’ll pull the UCON out so I can see for sure.

 

I’ll switch the wires too

 

Make sure you count to five after you pull the pin.







Err I mean three.

 

Scott just sent me an email. Says it could be the snorkel too. He wants me to turn the hat 180 and try it again.

 

Ah! Maybe

 

I knew it would be a hindrance. I’m going to go do the WOT run right now. See what happens.

 

Look at your datalog and see what the duty cycle of the 7th injector is. Let us know.

 

OK, I don’t really know how to do that. I’ll dig into it.

So... why didn’t Scott do that?

I just turned the snorkel hat around & got the laptop out.

Let me go make this run, then I’ll try to figure out how to check in the duty cycles .

Thank you John

 

No prob Tim. I'm not near my laptop to assist but you can ask the question to Scott when you send him your datalog. He would have seen any discrepancies and would know if the 7th was working correctly or not.
I know @loginfailed saw between 40 and 45% dc with the stock sc injectors. I dont know what he is seeing now with the 640cc injectors.

 

@HolyHandGrenade

 

Made a little more boost this time.

I’m sending the file to Scott now. I’ll ask him about the duty cycle too. I was surprised, thinking that he couldn’t see it.

 

BAM!

 

Nice! Thank you

 

inj1 tab..

 

@HolyHandGrenade

Looks like your running Win10?
Press SHIFT + Windows Key + S and your cursor should change to a + and the screen should got a tad white.
Then select the area of the screen you want to show us and it will copy it to the clipboard.
You can then paste from the clipboard into the reply box to attach the screen shot.

Unless your posting form your phone then nevermind and keep using your camera.

 

Yup, I just noticed that.

THIS is what I have

 

I am indeed using my phone camera. I’m rusty with a computer. Hadn’t used one in a few years before the UCON. Now, everything looks different.