SCS RAY10 wheels 16x8 & 17x8.5

OMG, Deja Vu! I have said this same thing so many times and agree with you 110% !!!! Like seriously, I have never once said Meh, that doesn't work! I have also said, if I had the money, I would have one of each line in a couple different colors, I like them so much!

 

New tires came in and I was finally able to get them mounted. (Bought the wheels sometime last year) Surprised to experience any rubbing with 265/70/17 but massaging the inner fender liner with the heat gun took care of most of it. The lift will take care of the rest.

 

Looks Great!

 

Thanks. It’s been a long time coming. Was torn between black and gunmetal and was still undecided after I received them. But once I saw them on the truck, I was stoked and very happy with the decision. Might go with bronze on my next truck.

 

Yea, the Silver Ray 10 is more like a Metalic Silver which is not Stainless but not Silver either. It is if you will, a true Silver, like a coin. I think it looks great on the MGM, especially with the black bead ring and SS bolt heads. You just watch how many heads you're gonna turn! I promise. The ones that don't fully turn, those are the really jealous ones.

The Bronze are very nice as well. The Silver stand out on the MGM, anything darker would have blended in. I prefer to stand out!

 

Last thing then I am out.....been searching the net for a vaca property rental in Siesta Key for like 7 hours........anyway, as I was about to say......go back and look at the pic you posted. Look at the color of the MGM on the very top of the fender there with the full sun reflection. Uhhh, do I see a exact match for your Bad Ass wheels?! I rest my case!

 

If I get lucky enough to get a set of Ray 10s 16 x 8 4" bs and I'm on stock tires there shouldn't be a problem with clearance ?

 

I have the exact same wheel/rim set up. love it. almost did ko2s but rolled the dice on the falkens and very happy with them so far.

 

Same here. Do you have any rubbing? Did you have to trim?

 

These things are gonna look sweet mounted, I can't wait!

 

Outstanding post !!!!!!!!!

 

I try.

I try to be nice to others, I try to be fair to others, and I try to help others. If I try and fail, at least I tried.

Plus I am old, and always encourage the younger generation to live life to the fullest and not let anyone take away their thunder.

 

Well damn said, man.



Very well said.

 

Isn't that my saying

 

You are a great role model Vin, even for this old dog! Long time! Hope all is well with you and yours. Still madly in love with these wheels!

 

Anyone know where to get black bolts for the fake bead locks?

 

If they are for ray 10s. Just unbolt them and have them powder coated.

 

I believe those bolts are bot supposed to come off.....id contact SCS ans see what they say.

 

Probably ebay - they come out - I took mine out and may just end up painting them - you can stick the threaded part through little holes in a sheet of cardboard to make painting them a pretty painless process.

 

I spent quite a bit of time trying to find the right size bolt and no one had it since it’s so short. Ended up getting an extra set directly from SCS and sent them to a powder coater I found online (pcbolts.com) because all the local shops didn’t recommend it since they said it’ll chip anyways when I try to put it on. Stan from pcbolts hooked it up and really quick turnaround since their business is primarily powder coating bolts and claim they have the science down so it doesn't easily chip. All mine went on fine with no signs of chips. I could’ve just taken my current set off but wanted zero downtime and no exposed holes while it was getting coated. Plus they have several different types of black and I chose stealth black to give it slight contrast.