Need clip part number (see pic)

I'm trying to find replacement clips for the little rubber part on the inner fender well. Toyota part number would be great!

 

@inwood customs you the know the part number of the metal attachments for this right?

 

Si, thanks for the tag sir!

uxcell Car 8mm Hole Black Plastic Rivets Bumper Door Fastener Clips 20Pcs

$7 uxcell 20pcs 8mm Plastic Rivets Automotive Body Fender Bumper Shield Retainers Clips Fasteners

https://www.amazon.com/dp/B00OK8EJO6?ref=yo_pop_ma

@Griffin13

 

I mean, op can buy a cpl from the dealership, but these work better.... much better from my experience.

I would also suggest buying 1 of these to make life easier.


Lisle 35260 Plastic Fastener Remover

$10 Lisle 35260 Plastic Fastener Remover

https://www.amazon.com/dp/B0002SRCMO/ref=cm_sw_r_other_apa_sXwYAbYWPQZ8A

 

First, I must say that I hate all plastic clips. Second, my OCD makes it so that things have to match. It' ridiculous but I'll never feel right knowing that they don't all match. So it's either 4 new OEM ONES or removing all of them to replace with the aftermarket suggested. The aftermarket are surely cheaper but will require more work on my part to remove and replace.

Don't flame me. I've owned 7 Toyota's now and take great pride in my meticulous upkeep and maintenance. Lol

 

Asshat! Hahaha!

 

Lol, the oem ones are thin, brittle, and dont even hold securely.

The ones i linked to hold firmly and are able to be reused. The oem ones seem like garbage to me.

If not happy send em back, Amazon is great about returns. Just say they didnt work as intended.

 

When ur ocd loses its shit because your oem skirts/splash guards rip.... and they will
Try these

https://www.tacomaworld.com/threads/splash-guards-precut.477766/

 

Shit, u meant the nuts/washers/bolts didnt you?

I went overboard because these come in handy so often..... the op has ocd, so the bolt heads may throw him into a fitshit. Just in case

$13 Hillman Group 290012, 1/4" x 1, 100-Pack Zinc Fender Washers, 1/4" x 1", Steel, 100 Pieces

https://www.amazon.com/dp/B000BD5GFU/ref=cm_sw_r_other_apa_z.CYAbJ3SAQZ7

$12 Hillman Group 180147 Nylon Insert Lock Nut, 1/4" by 20", 100-Pack

https://www.amazon.com/dp/B000B4GU90/ref=cm_sw_r_other_apa_V-CYAb9RG1Z8N

$13 Hard-to-Find Fastener 014973243807 Tap Hex Bolt, 1/4-20 x 1, zinc, 100 Count

https://www.amazon.com/dp/B00L1L8108/ref=cm_sw_r_other_apa_Y9CYAbPGAGEN0

Nylock Nuts, bolts, washers.
They wont work in all locations due to some mounting holes going into the boxed frame rail.

This should send him into ocd overdrive

 

@Griffin13
Im pretty sure these are the oem clips if u wanna go that route sir

90080-46327

 

Thank you Dave from Inwood Customs. I originally bought the wrong grommets/clips and will return. The ones on your link look like the ones I have on my 1st gen Tacoma 2003

 

Old thread, but really wanted to thank you for this post. Ordered these the other day based on your comment and they are perfect. Holding much better than the original clips.

 

Happy to help

 

Do these fit the 2023 Tacoma?

 

Do these work for the mudflaps too? I've been missing a few of those for a while now, also wondering if they fit the holes along the bed rail...when I brought my Tacoma in to get looked at for the flaking paint issue the dealership lost some

 

I'm not sure if they fit mudflaps, what holes in the bedrail?

 

No worries, I'll just order them and give them a try, no idea what caused the previous ones to drop out.

Here are the mudflaps:



Here are the holes in the bed rail:

 

Looks promising