Stock Wheels with 0.75" Wheel Spacer - Studs Too Long?

I'm planning on getting Bora 0.75" wheel spacers for stock sport rims, to clear the tire from rubbing the UCA. From what I read, the studs are longer than the width of the wheel spacer being 0.75". With stock sport rims, is there a pocket on the inside to allow for excess length of the threaded studs? Anyone have experience with this? Thanks

 

bump

 

Take your wheel off and look at it. Take a pic and post it. Alot of times, yes, there's pockets or openings where you can fit the shorter spacer, but I wouldn't go off of someone saying yeah you can, when you really can't. It's best to be 100% positive.

 

I've not run them on my Tacoma, but did on my Jeep. I don't see where you'd have any issue with studs being too long though. If nothing else, call Wheeler's Off Road and ask them.

 

The studs will stick out past Bora .75 spacers on Tacoma, but the stock sport wheels have pockets on back. So you will be fine. 1" Bora spacers factory studs are flush on the spacers. There is a thread that shows this, somewhere on here.

 

Thanks for advice

 

Ya I thought I've seen it somewhere on here, cant find it anymore.. Thanks though!

 

The Thread is BORA .75" spacers. Member/poster jon8251 confirmed with Bora no trimming of studs required.

 

https://www.tacomaworld.com/threads/bora-75-spacers.535543/

Thanks!