TRD Off Road and Sport Wheel Vinyl, Center Cap Inlays, and Tacoma Decals for Sale

So installed the decals and man that was rough. The sand color doesn’t match quicksand to well. Lining up the stickers was a pain in the ass. Not a bad concept though. Maybe a two piece set would be better. And if they all had the clear backing on them it would be better too. They are a little oversized on the thin lip that covers the aluminum. I think I’ll take them off tomorrow.

 

Thanks for the feedback!

The sand color is a hard color to match, especially since it is a color that is exclusive to Toyota and oracal 651 colors are somewhat limited. If you would like, I can mail you a full set of black decals with the clear tape on all and the inlays in a color one shade lighter to see if that works better for you.

The thin lines are purposely made a bit larger so that it guarantees all of the aluminum will be covered, especially if the vinyl is stretched or put on slightly crooked. I can see how this is more noticeable on the sand, but with the black it blends in.

 

I appreciate it but it’s okay, I’m glad to have supported your product but I’ll just keep the wheels they way they are for now.

 

Any chance on getting a vinyl decal that matches the color of the wheel?

 

No I tried multiple color shades of the available gun metal vynil and nothing came close!

 

I don’t know what everyone is complaining about. Are the decals perfect? Absolutely not. Were they difficult to install? Depends on who you are as a person IMO. The first wheel doesn’t look the best, but by the 2nd wheel I was able to do mostly without any bubbles. Completely worth the 40$.

The true test is if they’ll hold up!

 

Thank you for the feedback!

Would you like me to mail you 6 decals so you can redo your first wheel?

OP has had his decals on since early last Fall, he pressure washes his truck at least once a week, and tries to ride through every mud puddle and jump every dirt hill he can find, so far he has not had any issues with them.

 

Thanks they look great on the truck...

 

Is there a video on how to apply the center hubs?

 

No it's pretty simple once u take off the hub u will see the 2 tabs on the inside that hold the toyota emblem in place. I used the back end of a rubber screw driver to careully push on them until they pop out! Clean it well with alcohol and line up the vinyl. it's a pretty small area shouldn't have any problem laying in the vinyl itself!

 

Awesome! Thank you so much!

 

How did you get the TRD logo in blue? I've only seen the center cap decal in red or white lettering. Looks great, curious how you did it.

 

I believe when you are putting in your order, you would be able to add a comment on the color scheme you want.

 

Oh I see, thanks. I have the TRD decals that come from Thailand that many others have used, but they only come in red and white. I hadn't seen that other colors are for sale from the OP. May have to check out these decals in blue, looks cool.

 

yes i custom make all this so when you order you can ask for whatever color combinations you like! and whatever letters you want to put on there!

 

Awesome. I placed an order earlier today for TRD in blue. Thanks!

 

Didn't know those were available! I might have to hit you up for some if my current (potential) hack job doesn't end up working out. I ordered the black white ones from ebay/thailand, and they shipped.. but haven't been delivered yet.. and got some rrentrop SEMA inlay decals I was *hoping* might fit over the white letters to make em blue, but they were meant for the SEMA center caps, so dunno if the letters will be the right size.. no big loss $$ wise if not.. but if they don't, definitely going to keep this thread in mind for the inlays in black/blue. That will be much nicer.

 

When you say they are thicker than you thought, what do you mean exactly? They are paper thin stickers

 

Well they are 2 peices of vynil laying on top of each other so a bit stiffer than a single sheet

 

Put mine on today, happy with the results!! Worth it for the money for me. Not sure how they will hold up after a few off-road trips, but it was a pretty quick install and they shouldn't be hard to get off and swap on a new one if it gets messed up. You can't really tell they're on there unless your face is a foot from the wheel, and even then it's just because vinyl and alloy just look so different. Looks way better than stock IMO!!! Thanks!