What have you done to your Tacoma today? 1st Gen Edition

Closest to engine and yeah slow response just means it is dying a normal death, time for a new sensor is all

 

Cruise control yes, ABS no. So it's a white with a black stripes and a red (well more like pink) with an intermittent black dot.

 

Here it is if you have an automatic transmission like I think you do...

https://www.rockauto.com/en/moreinfo.php?pk=870733&cc=1375343

 

Nope 5 speed

 

Changed the e-brake ding dong under the cab.

 

Huh well they don't list one for 5 speed but I think the only difference is connector length because the connectors are mounted on the trans.

 

I'd assume the AT would be longer but this is Toyota lol

 

Here's one for a 5speed, made by NTK (NGK) it's still quality but it's weird they don't have a denso one for you, maybe the dealer does...

https://www.rockauto.com/en/moreinfo.php?pk=870733&cc=1375343

 

Upstream from the cat, this video might help though it's for a 2.7l 1st gen.

https://www.youtube.com/embed/UMyslPYbzYU

 

What side of the engine bay?

 

Driver side

 

Thanks, i'll probably replace both of them to be safe. I know that the downstream sensor is a cheap chinese knock off been on there for a couple of years.

thanks

 

I'm going to say something ADD related, ABS will be on the passenger side not the driver's side. I have connectors like that under the fuse box that are meant to control the electronic front differential ADD system, but I have a PreRunner so they're not used.

 

Very possible. Will keep researching. Thx!

 

I tried looking through the connector catalog but couldn't find anything like it. It's most likely for something 4WD related like the differential or the 4WD position sensors.

 

its not add related. my trucks got add. still unused

If i get time i might just go probe the fuse box with a multi meter and see if i can find anything that completes that circuit..

 

I did. I’ve got it all jigged up, so I’m set up to build more.

 

How many dolllars

 

Vacuum or Electronic ADD?

Under the fuse box will be the connectors for the ADD VSV's for vacuum actuated ADD.

 

I’d still have to figure final pricing, but it’d probably be in the $700-$800 range