**WET OKOLE GB 2013 Install Pictures**

I got a set of these seat covers used. Everything fits good so far but the front seats do not form to the section where your back goes. It's hard to explain but there is a gap between the seat covers and the seat where your back goes. So when you get out it fills back up with air and pops out. If I fold the seat forward it bubbles out.

Suggestions?

 

Old thread but anyhow installed wet okoles took seats out now im wondering do the seats need to be torqued if so how many lbs?

 

Funny that this popped up on my watched threads with an update. I was going to ask around to see if others had their colored logos starting to come off as well.

 

Greetings, I’m pulling the trigger on some wet okele covers, I believe what you have is taupe, which is what I’ll be getting. Is there a piping accent color too, it’s hard to tell from the pictures if what you have is straight taupe, or if there is a black, accent along the seams. Thanks you!

 

They are actually a very light gray, the surroundings reflecting off of them must give them the taupe look. Also the piping is charcoal gray.

Congrats on selecting them though!