1995-2004 3.4L V6 fabricated solid motor mounts for sale

Damn these are excellent.

 

Would another buyer of the motor and tranny mounts make the price drop? I'm looking at doing a frame swap and that seems like an optimal time...

 

You can have my spot for the motor mounts. We are closing on a house right now so money got a little tight on truck parts.

 

Whoever sends payment gets parts haha.

 

I saw you made a r150f mount, have you made any 2wd solid mounts? also did you ever get around to finding out if your mounts work on 5 lugs?

 

How much was it for a complete package? I'm going to inspect a frame tomorrow and would probably want to go this route if I get the frame so I can do these during the swap.

 

I do have a 2wd auto trans solid mount for the 1st gen 6 lug trucks.

I'm still not sure if the 3.4 motor mounts will bolt up to the 5 lug frame perch. Have not come across a way or option to test it yet.

 

DM'd you

 

Just FYI, I have an Instagram page up for all this. Follow @solid_offroad

 

How are these on a daily driver? Truck is supercharged and having an even peppier throttle response would be fun. Just worried about the vibrations? Also does it cause any additional issues down the road?

 

mounts like these cause a little more vibes at idle. But thats the only time you'll notice it. Really makes the truck grab hard. No real downsides really.

 

In the 200+ sets of motor mounts Ive sold since 2005, Ive only had one customer unhappy with the added vibrations. He was so critical of the added vibration that I really suspected there was something else going on with his truck, and that the solid motor mounts just accentuated some current issue that was already there. Unfortunately I had no way to figure it out without inspecting his truck.

I always tell people its like the difference of adding an aftermarket exhaust, as far as in-cab vibrations and horsepower gain "feels"

The only downside is that you will be burning more tire rubber and wont have your shifter slapping you in the right leg when off-roading.

 

.

 

PM,d you.

 

I didn't see anything in my inbox. Re-send message when you can.

 

Yes very interested in a set of these. They will be used on a 85 runner with a 5Z with an A340. I don't see a problem with these and the application with what I want to use them in. Your thoughts.

 

Adding to the wish list!

 

"Should" bolt up fine. Never done that one so i dont know if the frame perch distance in different from the block. in 85 they never had a V6 motor.

 

Another set ready to ship off! motor mounts and 2wd auto trans mount kit. $750 for the kit.

 

For the 3.4 motor mounts are the mounts to the frame supposed to be the same or have an offset? I'm trying to do the install and they are not lining up. The ones that came the bottoms are the same and I can't tell if there is a left/right specific one- are they supposed to be different?