2.7 3rz supercharger kits

I could see that, it's like 80 today in Phoenix. I still like the extra power for sure. I'm just not sure if my SC is healthy or not. Gotta get a better boost gauge and clean up my intake since it is still stock.

 

Hers a couple pics of one I made recently. It pretty simple and was pretty cheap. I kind of wish I would have painted it black. I also moved the crank breather to t into the big vac line that runs to the Intake box.

 

Huh I don't have that huge vac line, I only have the plug on the airbox. But I could really use one of those pipes. What size of pipe and what was the angle of the bend?

 

3” 45*
Used a 3” hump hose coupler at the air box since it’s a weird angle. I used a 3” to 2.75” coupler at the TB

 

I'm sure there's a way to put in electric fans.

 

Is that a water/meth tank?

 

There is. LCE sells a kit for $400

 

It’s just a washer reservoir. I do, however, have a snow meth kit for it that will go on once I get time to install the 58mm pulley.

 

Nice. I’d really like to turn up the boost and install water/meth, but idk If I want to get into tuning.

 

Meth is supposed to be pretty easy. Talked to the guy with the 500k mile 3.4 about it and is seems pretty simple from what he said. I’ll let you know how it goes once I get it on to hopefully help you decide

 

So is your truck SC or turbo now?

 

I recently bought a different truck that has a s/c already installed on it.

 

Neat, since you have the perfect mockup vehicle is there anyway I can bribe you to make one of those intake pipes for me. No one around me has a mandrel bender so getting a 45° ends up too kinked :/

 

I’d love to throw on the 10 psi pulley with a water/meth kit. It’d make the truck run amazing

 

Right, but if you go to the Supercharger page it says:

WARNING!
**Will not work with LC Engineering underdrive crankshaft pulley.**
**Will not work with electric cooling fan. **

Guess what I am saying is I am sure you can make it happen.

 

It says that idk why it wouldn’t. There’s plenty of clearance. In actuality, there’s probaly more clearance with the electric fans, cause you couldn’t slip a hair between my supercharger idler pulley and my fan blades.

 

I can't find Mandrel Bends here either. I've ordered them in the past from Columbia River, but since I only needed one this time, I just bought this one from eBay: https://www.ebay.com/itm/3-45-304-S...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
Then I just drilled a hole on the side for the IAC connection. For this one, I used a copper threaded 90* fitting, but for the turbo IC piping I chopped the small pipe off of the stock intake and welded it on. If you're not able to make one, just lmk and I could probably do one for you.

That's what I'm hoping! Hopefully I'll get some time in the next couple weeks to get it set up.

 

Well in that case IDK why...you keep the waterpump pulley on anyway. I can always ask the reasoning.

 

I have Yota 1 building me an engine right now with hopes of LCE Low Boost here pretty soon. NICE Setup!