(SOLD OUT) Discounted Price on TRD Pro Suspension Kit

Part number for the Baja kit ?

 

PTR13-35120

 

Finally got everything installed. 16x8 Volk TE37's with 265/75 KO2's, 1/4 front spacer and head strong progressive add a leaf. Sits taller than I thought.

 

Got my rears installed yesterday (sporting clays today ) - took longer than I wanted, but that’s because I cleaned up the rear frame and painted, and lightly clear coated the shocks. Had to cut the top nut off the old ones- make sure to have your Diablo carbide tipped sawzall blades, those cheapo HF blades get consumed in less than 10 seconds. Front coil overs and possibly new poly bushings are going in next weekend.

I’ve noted a possible mistake in TRD’s installation bulletin- the bulletin specifies that rear shock lower bolts are to be torqued to 43 ft-lbs, but the service manual specifies 74 ft-lbs (with the wheels on the ground, not in droop), so I recommend using what’s called out in the service manual.

 

Looks great!

 

Crazy how much taller that looks than others that have posted. Must be the KO2's?

 

Same as pro, except the 150 is 120

 

Yep. Lol

 

I've had mine on for a month or so and around 1000 miles and the ride has really improved in the last few days. I towed a small trailer through the mountains for 100 miles and then took it wheeling for a day and everything flexed out.

 

Finally installed mine over the weekend, along with a ECGS bushing and new LF axle (bearing was so bad it wore out the inner CV joint). Also installed a Wheelers 1.5" AAL.

Ride quality is night and day better. Haven't taken measurements yet. This replaced a revtek 3" spacer/block lift installed by the PO (on original shocks, 179k), so I didn't bother with 'before' measuring lol.

 

Braid over rubber on Baha,Braid over rubber with a rubber sleave over the the braid on the Pro kits

 

Okay so I totally missed the trd pro deal and looking at the Baja kit and anyone explain the difference. Will I get any lift out of installing the Baja kit. Toyota installed a leveling kit already is the Baja kit able to be used in conjunction with the level kit to get my desired final lift ? Thanks everyone

 

Gorgeous!

 

The Baja kit has a 650lb spring and the pro has a 600lb spring. The Baja stuff is not zinc coated to protect it and the pro is. The pro has sleeves covering the braided lines on the rear. As far as valving I'm not they may be different. I have the Baja kit and thought it was going to be stiff but I don't think it is but it's stiffer than stock for sure. You won't get much lift out of it maybe an inch to an inch and a half depending on what other weight you have. I added quarter inch spacers and I'm going to switch them to half inch spacers for a little more lift. That will put me at about 2 inches up front maybe a little more.

 

If anyone is still wary about buying these for their truck, I love them on my Pro. Good ride for daily driving, and have good flex wheeling. They work really well when driving through downtown New Orleans, help soak up the bumps and pot holes.

 

They are all gone spent morning trying to locate. If anyone has a kit they want to sell I got $$$

 

Yes they're loooong gone by now except for maybe a few reseller or hoarder outliers. You can thank the 3rd gen guys for buying out all the stock!

 

Thanks 3rd gen guys

 

Thank the 3rd gen guys for first posting about it back in January...not their fault a lot of y'all missed out on the clearance sale.

 

Hopefully if the Baja kit goes to clearance someone will list it here