Tacoma HD Leaf Packs 2 Sizes Now Available MADE IN THE USA!

Hey Joe, I found you! Sub'd like a Cra Cra MoFo!

 

Thanks buddy. Gonna order a set soon.

 

@Blackout14
Interested in these... (apologies, I didnt read the whole thread if it has been answered already) Can the 5+ be run with one less leaf to simulate the 4+? I dont have a ton of weight yet, but it wont be getting any lighter.

 

I'm confused, why pay more and modify the 5+1 to be a 4+1? If that's even possible.

 

Oh, by the way, had 12 bags of mulch in the bed and I measured the drop at the beaver tail in my receiver, so basically as far back as possible. Drop was 2". Seems excessive for 12 bags of mulch. Just goes to show how weak the OEM leafs are.

 

So he can re add the leaf later as he adds weight to the truck.

 

Oh. 10-4.

 

Yep!

 

Yes you can always toss another leaf in. Got some pictures comming in a bit with the 4+1 and shackle flip. @Redmann is going to be wheeling it next weekend but we got a full 12 inches of travel out of the truck with the shock relocate and shackle flip with these

Wheel is off the ground

No negative arch yet shock has another 2 inches to go

 

I have a few wheeling trips under my belt on the HD version of these leafs. URE, then AOP. Still liking them. holding weight no problem and smooth. I did have to trim one bolt to clearance at the side of the gas tank. retainer bolt needs to be switched around, so that the bolt head is at the gas tank, and the threads go outboard. Had some rub on the gas tank from the extra bolt length. I cut the extra off, good to go. FYI, this bolt cannot be switched while the leafs are installed. do it before you install.

 

HD Pack.

 

You could, both packs use the same intermediate leafs, although I don't know which one you'd want to take out a 5+pack to make a 4+pack

 

HD Pack fairly flexy, extended billys out back, the ones that were recommended by AllPoo for their expo pack. pulled up on the ramp to get some droop, to access that bolt I had to trim off.

 

Very cool!

 

Heading out of town tonight till next Monday. So if anyone needs anything and I am unable to respond that’s why. I’ll be back around Monday afternoon

 

Have fun, be safe!

 

thanks buddy

 

Does anyone happen to know how much travel the Fox TRD Pro shocks have? I am looking into different option to get more lift but I didn't know much about it till after I got the pro. Until TW I just thought I could lift it with the Fox suspension already under the truck.

 

sub to read later