Anytime Front and Rear Camera Mod

Ordered! If there are any issues, let me know.

The wife and I went to see Super Troopers 2 last night...lots of digs at Canada, most of them pretty accurate!

 

Order rececived. I'll get it processed and shipped out ASAP.

I need to go see that still. Looks hilarious.

Appreciate your order man.
JJ

 

Is that cubby switch panel for the 18’s too? And if I got a multi switch panel, would it work with that too?

 

The cubby mounts fit the 2018. I’m not sure what you mean by multi switch panel?

JJ

 

Something like this,

8 Gang on-off Control Switch Panel for Jeeps Toyotas Trucks Utvs Boats Rvs Trailers Utility Trucks 8 Switch Panel Power System with Concealed Mounting Hardware

https://www.amazon.com/dp/B07BLV634...qG&pd_rd_r=N4A4BW2Z6CDZC4Z8664R&pd_rd_w=l29PW

And if anyone knows of something like that for a cheaper price and that works well in a Tacoma, please post it up!

 

Yes it will work with a switch controller like that or Switch Pros/sPod.

JJ

 

Can you guys point me to:

1) on/off rocker that fits the blank on the left side of the steering wheel

and

2) a dpdt (on/off/on) that fits the blank on the RIGHT (under the radio)

Cheers,

 

I don’t believe you’ll be able to find a rocker switch that will fit the smaller sized blanks.

As for the cubby side, are you wanting a rocker switch for simple on/off functions? The push button switch contours more towards the OEM/Factory look and will provide the same functionality.

The OP for the HAI kit that you have may have a better source regarding the DPDT rocker switch you are looking for. I do not provide rocker switches, as I want my kit to maintain an OEM/Factory look.
JJ

 

After a while of stalking this, I just placed my order last night!
I had a question though, I ordered the 3 switch cubby mount with the order also.
Do you provide a blank for 3rd slot, or is Amazon the go to source for that?

 

Matt, thanks for your order. It'll actually ship today. I do not provide a switch blank. Some posted the below Amazon link.

$16 Toyota Genuine Spare Switch Hole Cover

https://www.amazon.com/dp/B00J09FREQ

Thanks
JJ

 

Install completed with no issues.
Thanks for a great and useful mod.

 

Anytime man. Glad it all worked out.

JJ

 

Jut got back from a quick trip to Moab this weekend and it didnt take a full 2 minutes before I had gotten my moneys worth out of the front camera. The hoods on these trucks are gigantic and when the truck is pointing up and the trail is pointing down, you cant see a dang thing... until you turn on the front camera. Absolutely loved having it. I wish I had done this sooner but I could not be more happy to have it on now. If you wheel one of these third gens, do this front camera mod. Its a must have.

 

Bad ass man. Happy it worked out.

JJ

 

I noticed the same thing when wheeling this weekend and my angle showed me at almost 30 degrees , I wish I had the camera. I plan on ordering one asap, just trying to decide what I want in terms of switches. Does anyone know if that spare blank spot on the overhead switches ( I don't have a sunroof I'm guessing it goes there) can use the same button size as under the radio? And if anyone has the part number to utilize that same spot that would be great.

 

You can get switches with the order of your kit. You can also get a cubby mount, that goes to the left of the steering wheel.

JJ

 

Yes I plan on getting the entire front/rear anytime kit, with switches and front camera was just wondering what switch sizes I want. And call me crazy but I like having the little cubby on the left so now I have to figure out where else to mount switches This is the blank spot I was hoping for, empty space in top right. On and thats not my photo, copied it from another thread.

 

OK, you're crazy. Haha

So there's two switch sizes for the OEM Toyota Push button styles. The small, which I refer to as center size is about 32mmx22mm. The larger, which I refer to as cubby size is about 39mmx21mm. The cubby size is pretty close to the same size as your rocker switches that you have on the bottom row.

JJ

 

That's not my photograph, I took it from another thread but it showed the empty spot I was speaking of lol

 

I don't provide mounts for that location, but the switch size would be the cubby. I think Meso sells them.

JJ