What Have You Done To Your 3rd Gen Today?

No problem. At my local store, they are somewhat hidden on a single end display.

They feel about as solid as Pelican cases do.

 

Hard wired a Dual GPS receiver into my dash with a CH4x4 GPS switch and also installed the ram mount solution from lifestyleoverland. It allows me to run Gaia GPS on my WIFI only IPAD in my truck with a super solid and totally removable mounting solution. Pics to follow shortly...

 

Look, and I thought I was OCD!!!!! Man the only way to top this is to run it up through the cab between the headliner and drill into the sat antenna!

I bet you are good to go forever though!

 

Ummm, I'll BRB.


The sat antenna would be epic.


That was a bit of a kludge. If I had some VHB tape and a zip tie support on hand, I would have just stuck it to the side of the bed behind the filler.

 

Who makes your front guard?

 

I’d try eBay. I purchased a pelican 1750 for $91 and another one for $127.50

 

it's a 48" Plano gun box. I use it for recovery gear

 

Not sure if you need a larger case than this or plan to throw it down a mountain side but check this out:

 

Following up here, FINALLY put on my Headwaters Seat Covers. Was tied up with a move and new job, etc... I got the Kryptek Raid/Tactical Grey bi-tone set, with two add-ons; the passenger side pocket and the driver's under knee velcro pocket.

My conclusion - big fan of the quality, but they were a pain to put on. Granted, i'm awful with anything like this so take that with a grain of salt. The fit will settle in I'm sure, and they're already less baggy looking than they were last night when I first installed them.

























My one complaint is that the left-side Passenger pocket is angled a bit off - if anything, I think they should make these types of pockets an angle cut on top, and have the bottom be flat horizontally. Oh, and I also had called in when i'd ordered to see if they did any customization at all, I was thinking of having molle/PALS webbing across the front of the driver's side pocket for a holster, or flashlight holder, but I was told it wasn't an option. The rep (younger guy it sounded like) actually scoffed at the idea (or at the fact that I was asking about customization) which was odd, but it is what it is.

Will update down the road as well once these are broken in!

 

Yeah, that's about the right size. I'll have to drop by my local store and lay hands on one (and pick up my free multimeter, tarp, tin snips, whatever-it-is-this-month).

 

Ah. Thanks! Nice to see that Plano still makes some decent stuff (price is pretty reasonable, too). I've seen some of their Walmart-ified offerings and wasn't impressed.

 

That pattern... It's like an optical illusion...


Just kidding. Hope they serve you well.

 

Did you need to lift the truck for 275s? I’ve been considering 275s or 285s

Looks great!

 

I was pretty pleased with the free microfiber towels. I usually grab the tarp.

 

LOL

Yea, free is cool.

We always grab the free tarp or moving blanket and then donate the blanket to a local pet shelter or pet rescue. I work with a pet foster and she is always glad to have them.

 

Do you have a lift?

 

What lift do you have up front and in the rear in this pic?

 

Yeah; in that picture it was bilstein 6112's in front on 5th ring (out of 6), and I think I had the all-poo (intentional misspelling) leaf pack in the rear at that time. Fast forward a bit, and as of about a month ago I'm now on ADS front and rear, with Icon MXT leaf pack.

As it sits now.

 

I have bilstein 6112's set at the 5th and 6th clip (2" setting), 5160's out back with a 3 leaf AAL and SPC uca's.

 

What lift did the 887 give you in the front?