Turbo BS Thread

Damn seriously....had to take off work. was searching all dealers for the hose. Ended up at Napa instead. Half the price.

 

That reminds me. Bleed your brakes regularly. Difference is night n day. If u go fast, just as important to be able to stop the vehicle

 

I bleed mine every brake pad change or 3 years. Makes a huge difference

 

Yes! Very easy to do especially with a pneumatic bleeder.

 

Which one you use?

 

I used this one. Only thing Is that it uses large amounts of air. Trashed it after it started to leak. Then used my friends one which is like industrial grade

Pneumatic Brake Fluid Bleeder w/ 4 Master Cylinder Adapters 90 - 120 PSI

$12 PMD Products Pneumatic Brake Fluid Bleeder w/ 4 Master Cylinder Adapters 90-120 PSI

https://www.amazon.com/dp/B009XDDRDC/ref=cm_sw_r_cp_api_i_MNr4AbEA7Y0DB

 

If it cuts down on heat in the engine compartment then it would be worth it

 

I've never bled my brakes

 

Probably the color of octopus ink.....just bled my friend's '98 Tacoma's. I don't think it had ever been changed by the previous owner.....

 

any of y'all partners live 'round Amarillo?

 

All in.

 

Woot! Motorkote is your favorite oil over redline now?

 

Let us know if you notice anything

 

Nah. Just a friction reducer. Going to try it in the trans as well, at the next change.

 

I will. Just filled up the gas, prior to adding it in.

Once I get some more transmission fluid, I'll put it in there as well.

 

This stuff is insane. Works incredibly well. As soon as my store gets some I'm doing it too.
https://www.youtube.com/watch?v=88vwUwa3igQ

 

The main reason that I purchased the Motorkote, was because of the extreme lift of my cams. Wanting to reduce the friction and prevent wear on the lobes.

After installing the turbo, there has been a slight decrease in power since it isn't forcing air into the engine. No wastegate.

After the fill of about 16 oz last night, there was a very noticeable difference in engine performance. Maybe the turbo is spinning a little easier, since this fluid helped reduce the friction of the old oil which had been in there for years. (Note that it still spun freely prior to install). If the cams, bearings, and piston rings are moving all with less friction, it is easy to see how the engine has more pep. Again, it was a noticeable improvement, after about ten miles.

 

Damn time to order some

 

NMF works well too.