NorCal: South-East Bay Mod Day #5 - 4/28/18

I'm planning on taking most of my system out of the bed to access the tank location so I can certainly transport that unit. Get it paid for and I'll get it down there.

 

I'm a maybe, won't be able to make it until afternoon if I do make it. No mods for me, just there to say hello to everyone, bullshit, and help if someone needs it.

 

I anticipate that @little squirt and I should arrive by noon...

 

I'll try to come early. Either get a head start on steering rack bushings or dive in to help with whatever.

 

I'm in, no mods. I'll bring soda.

 

PM'd my address to everyone that is confirmed. Anyone else decide to come last minute, DM me for the address.

Suspension mods get priority since they take up the most time. @Blksaint and @TacoS2017 - please try to show up right at 8AM so we can get your trucks out of the way. We'll probably tackle @IronPeak and @BudMan after that.

Thanks!

 

I'm off the hook for bringing little squirts tail pipe(already sold) but I should still be able to be there but will confirm tomorrow after work.

 

If I can get in early (family day) I would need to swap some springs (650# to 700# springs). Can bring some donuts or similar for the morning crowd.

 

Forgot to mention, any suspension folks that need an alignment, Wheel Works is a mile away from my house. I'd look into seeing if there's any appointments in the afternoon, especially if you have a far drive home.

Also, this goes without saying, but as we work on trucks throughout the day, the more hands on deck, the faster we can get through everyone's mods - especially if your mod requires garage/driveway space.

 

I will be coming from San Jose area, if anyone needs help bringing stuff Ill be happy to help.

 

I'll be coming to the meet. I have one little project and then I'm all hands on deck to help people with suspension or wherever.

Hopefully selling some items too.

I have some stock OR leafs with the Icon 3leaf progressive attached. Looking for $150.

Also I have a Tepui Ayer I'm looking to unload. It's in pretty good condition. Needs to be Scotchgarded and possible get some new eggshell mattresses padding. I'll have it on the back of the truck if anyone is interested and wants to look at it/open it up. Need about $500 out of it. Trying to get a larger RTT. I'm also willing to trade plus cash on my end for a larger RTT.

 

I'd be interested in the stack on if nobody has claimed it.

 

Last min special tool request please quote my post so i see it.

Packing a small tub of things

Going to bring:

Ecgs removal tool
Spring compressor that fit my kings////op has
2.5 spanner wrench
Seal puller
Ball joint splitter
Map gas
4” grinder w/cutter/grinding discs//////op has
Tap/die set/ez outs or fuckin break off fuck your day up extractors if u do.
Die grinder//////op has
Air sander/////op has
3/8 dewalt impact///////op has
BFH//////op has
Breaker bar//////op has
36” prybar//////op has

Shoebox full of BMW of Maui beer coozies for attendies. 1 or 2 per person free of charge

Miller 115v welder with gas (if needed, its staying home unless someone chimes in that needs to burn some shit in)

If anything above is already there, lemme know so i can leave them at home and lightn our load w/ @TOP TACO as we be cruisin in his taco that has limited space with more parts for others being transported and my cooler takes priority over everything else

 

Thanks for offering to bring those tools! Of those tools you mentioned, I have a spring compressor, 4" grinder, tap/die set, impact guns/wrenches, BFH, breaker bar and pry bar. However it's up to you if you still want to bring that stuff

I can't find the ECGS bushing removal tool (whoever borrowed it, please return it ), but I do have the seal and race driver set to push the new bushing in.

 

Bummed I can’t make it man! Is @Tee Arghhhhhh Dee bringing his delicious meat?

 

cool bro!, i have the ecgs removal tool and will bring, will leave bearing race driver set at home along with others mentioned..just didnt know if we would have multiple same jobs going on at the same time...for time being, i will edit my to bring tool list down with what OP has already

 

10-4 @MJonaGS32

 

That's the plan, I'll be shakin it all around.

 

If you guys think it would help with anything, I have a 5ft pry bar I could send with @TOP TACO and @little squirt

 

5ft pry bar?! I think I know what we can do with that



Nah but really, its up to you. I don't know what we'd need it for. I have a few different pry bars