What Have You Done To Your 2nd Gen Tacoma Today?

My truck went in for the CRC frame treatment. I thought I'd have em change the diff gear oil while it was there. I had it done in Sept 2016 at the same dealership for somewhere around 78 bucks. My quote this time was like 238 bucks! According to them it's because my truck needed a special additive, the 4 oz of LSD. I didn't even bother to argue that my 09 Prerunner doesn't even need the "special additive". I'm gonna buy my own and either change it myself or have my local mechanic do it. What a rip off

 

That would probably be around $300 at the dealerships near me.

 

Kept working on the passenger fender fitment yesterday. It's almost finished. Still one small spot at the a pillar that is touching on the underside. I got it so I can run a piece of paper around the headlight. I also need to do a little work to get the trim piece under the headlight to fit better as it's pressing into the grill and bowing.

 

I was quoted 250...

 

I think the pricing varies depending on astral alignment and who answers the phone when you call.

 

Any improvement so far with new coils? Heard they are pretty unreliable compaired to oem

 

Installed some new KC HiLites ditch lights the other day

 

Do you have long arms or something? Why is that cb mic so far into that footwell?

 

Sounds like a DIY Tacomaholic video

 

Tutorials for t-case, front diff, and rear diff already live.

 

Oh wait. Aren’t we not supposed to talk about your videos or something

 

I've confirmed with the powers that be and we are in the clear.

 

Added a 9watt led rock light under the hood. Don’t mind the exreamly dirty engine bay.

 

These remind me of this haha

 

Add a washer(s) underneath... until the angle is right.

 

Johnny 5 is alive .

 

Brute force Fabrication.

 

Number 5 is alive, LOL I like it.

 

Installed my trailer plug relocation bracket from IKA Fabrications. Hardest part was getting the old bracket off, the two screws holding the plug on sheared right off and I had to drill out one of the bolts just to get the plug off. WD40 took care of the bolts holding the old bent bracket on.