What Have You Done To Your 2nd Gen Tacoma Today?

Ordered some headlights from tacomabeast.com $100 off "exclusive" discount offer!
https://tacomabeast.com/collections...light-bar-drl-version-2?variant=7152326606878

 

I would like to know also. Google comes up with nothing.

 

It's like a 3 hour job, not hard but time consuming.

 

http://lmgtfy.com/?q=trd+door+lock+cover

Works for me?

 

Nice drive in the rockys.

 

Hi, I got them from ebay 9.99$ it's a four pack. I'll try to add the link, didn't work.

 

I could get alink but here's a screenshot.

 

Wrong gen. This is what have you done to your second gen not third gen. There is a thread on that I believe somewhere. BTW love that color. Wish that was an option on 2nd gens

 

Oops, thanks again.

 

Put my rear fender liners back in and made them fit my high clearance bumper. Didn't realize how much I would miss having these stupid things. Rocks sound like gunshots and any puddle you hit gushes out of the fuel door without them.





Also painted and installed my BAMF LCA Skids. These things are beefy!





Thanks, @JLee!
These welds are amazing, they always impress the hell out of me!

 

We had bought our Tacoma used with about 65K on it and the belt squealed a little when it was cold/moist outside in the morning. Keeping the old one under the rear seats for an emergency backup, but it was definitely starting to crack in several places. Time for a new one.

 

Coated the shocks and coilovers in clear gloss acrylic today so they stay shiny.

 

sanded and rattle canned my black mirrors with some dupli color silver Mica, high gloss finish, and plasti dip on the black corner mount pillars

Before

After

 

Modified oem bumpstops to work with wheelers u bolt flip kit. Gave it a good vacuum, wash, and minor detail as its been months. Hoping to get it lifted in two weeks.

 

Why don't you fix it so it doesn't throw a cel?

Or Acetone/Trans fluid 50/50.

Upside down flag

 

Those white wheels look great!

 

Who makes the bed bars on your truck?

 

I've had this old 05 truck w/100,500 miles now going on 6 years. Had several issues in which I tried to fix. Then cleared the codes to see if it would come back or a new one would pop up. The biggest issue I had was the exhaust gas recirculation system. Ended up by passing it.

 

Suggest doing it on a flat hard surface, have several socket extensions for reaching hard to reach nuts, saran wrap place it in between socket and nut to hold it in the socket, good light (bulb/flashlight) and a magnet. Oddest thing about removing Intake manifold, to get access to the bottom 2/3 nuts. You have to go through driver side well wheel to remove and install the nuts.

 

Your Hostas look great!!