The Lair

Who...


@DoubleRGirl

?

 

My truck is not optimal for wheeling right now.

I think I’m gonna do a welding day at my place this weekend. Maybe bring stuff that you need welded? You can borrow my welder.

@HolyHandGrenade - will my 4.5 gallon Porter Cable compressor work with the plasma cutter that you have? If it will, maybe I’ll order one up and hope it gets to my doorstep before the weekend.

 

next weekend? weekend after? Still gonna head up there and scope some stuff out, I can probably swing by to weld some things up, I need to get my rear bumper done

 

@DoubleRGirl

 

I’m thinking this weekend because my wife and daughter are gonna be out-of-country for a week. Which means I have a spare car in case my truck is incapacitated.

I’m gonna weld up my Cam Tab gussets and a couple other small things.

 

Ugh I gotta go those. My OEM cam tabs are ugly. I did some other things yesterday though. Rear diff fluid change, retorqued my whole rear suspension after last weeks install, put my skids back on, painted the rest of the rear axle and whatever else I could find to paint under there.

 

I really don’t know. I don’t know what that compressor puts out. I don’t know the plasmas minimum requirements.

I never cared to look into it because I knew I wouldn’t have to worry about it.

Take your blow gun, set the regulator to 60 PSI. However long it’ll maintain 60 PSI, is how long you’ll be able to run the plasma in one shot.

 

I might’ve been interested in swinging by, but I’m headed to NH this weekend. Taking the Hobart and the Plasma to do a little project for my Folks.

 

I should just order the plasma no matter what. I think my compressor should be fine.
Can you link me again to that Plasma cutter please?

 

Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut

$230 LOTOS LT5000D Plasma Cutter, 2024 Upgraded 5/8" 16mm Clean Cut 3/4" 20mm Severance Cut 50A Plasma Metal Cutter Machine, Plasma Cutting Equipment, Dual Voltage 120V or 240V, Brown

https://www.amazon.com/dp/B004VFJL14/ref=cm_sw_r_cp_api_i_X805AbCNJ1ST7

It runs better with extended tips

 

@Subway4X4

PT-31 LG-40 Plasma Tip Nozzle Electrode Extended Cutting Consumable CUT-50 CUT-40D 40pcs

$14 RIVERWELD L-TEC PT-31 JG-40 WSD-LG40 Plasma Electrode 18205L Tips Nozzle Extended 18866L Shroud Shield Cup 18204 Kit Fit Cut 50D 50 40 Plasma Cutter Torch 40pcs

https://www.amazon.com/dp/B01DNOYQ68/ref=cm_sw_r_cp_api_i_3-05AbHQAN4G4

 

Thanks. Looking at eBay as well.

There's a Pilot Arc

$249 LTP5000D Plasma Cutter, 2024 Upgraded 5/8" 16mm Clean Cut 3/4" 20mm Severance Cut 50A Non-Touch Pilot Arc Plasma Metal Cutter Machine, Plasma Cutting Equipment, Dual Voltage 120V or 240V, Brown

LTP5000D that's available. Anyone have an opinion on Pilot Arc Plasma Cutters?

@stairgod ?

 

I feel like @stairgod would have an opinion on everything

 

This 11 lb propane tank is the perfect size! Perfect measurements for a swingout. Next to a regular 20 lb tank for comparison.

 

Where you putting it at on your swingout?

 

I have nothing on there right now, so I’ll put the propane tank and one Jerry can on there.

 

Dude you’re going to carry that on the swingout?

 

going to make those Maryland drivers scared to drive behind him

 

Is that legal?

 

@Chux has.. not illegal?