Mike singer voltage booster groupbuy feeler thread [ CLOSED]

try a new email... he seems to be on it today

 

paid, received, and installed in a minute! awesome 14.5V stage 1

 

Hi guys, I’m being asked this question by Michael Singer. I have a 2016 Tacoma TRD sport. It is the 3.5L with trailer pkg. I’m not at a position to take anything apart for a few days. Can anyone help?

Thanks in advance!!

“I will need to confirm your plug code

if you can just send me a photo of the stock plug or confirm it is the 4 pin plug that is all i need to know (and not the 2 PIN LIN bus plug)”

 

I've sent 2 different emails without a reply.

 

Please add me to the list for Stage 1....
2013 Tacoma Access Cab w/ 2.7L 5 speed 4x4. Upgrade Alternator to 250 watt unit, but still uses stock alternator plug.

What email can I reach Mr. Singer at?

 

I checked the status of mine and it's in pre-shipment. Which means he printed the label but hasn't shipped yet.


You can email him at:


Singer Alternator
sales@singeralternators.com

 

Thanks for looking out bro.

 

Mine took about a week to ship. I asked him why and he said that he still had to make it.

 

Remember everyone that you should to get a voltage meter inside the cab to make sure that you are getting the correct voltage (and to troubleshoot if issues arise). I'm going to run mine directly off the battery. Some people choose the amps.

I'm not sure if a scangauge will pick up the voltage after the plug has been connected (I don't think it will). Does anyone who placed an order have a scangauge to test?

 

Yes, my Ultragauge shows the new higher voltage.

 

Just checking, I just unplug the green plug from the alternator, add the harness, then plug the other side back in?

 

Sounds correct to me but I don't have mine yet to check.

 

I got it. That was the correct procedure. Just was thrown off because one plug has 4 wires, and the other has 2.

I checked my scan gauge, and cold start was 14.6/7. My sPod said 15.1 but it's connected to the battery

 

I want to pick up a stage 2 so I can charge this monster , but I don't have an IG-S-L- "x" tag on my alternator... all the numberrs match the one in the OP though.

https://www.batteriesplus.com/battery/marine-and-boat/deep-cycle/bci-group-31m/sli31agmdpm

Any idea where else to look? 2015 TRDOR DCSB w/ Tow pkg

 

Before


After

 

what stage is that? just got my stage one today.

 

anyone know what one you need for a 3rd gen tacoma?
Or are they all the same at the IG S LM?

I'm in for a stage one if this is still going.

 

Stage One installed. Cold start was where it should be. Once warmed up only getting 13.5v. who else has a stage one installed?

 

This is stage 1

 

The voltage reading on my battery with stage 1 is higher than what the ecu or cig lighter shows. Cold start this morning for me was 15.1, quickly drops to 14.3-4