1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: 90000 mile service Starting to get a vibration through the truck while accelerating Is there a trick to tightening the brake line flare fittings and not leak? Rear End Rumble when slowing down 2012 TRD Sport Wheel bearing noise/replacement Needing to know the type screws used for side bed accy rail for 2010 tacoma

CSF All Aluminum Performance Radiator For our trucks FINALLY!!!

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Roostfactor, Mar 16, 2018.

Page 31 of 107
  1. Apr 28, 2018 at 8:49 PM
    #601
    Biscuits

    #601
    Biscuits Thorny Crown of Entropy

    Joined:
    Aug 8, 2010
    Member:
    #41397
    Messages:
    15,577
    Gender:
    Male
    Swiggity swangin' biggity bangin'
    [​IMG]

    You're not the only person to have told me that this week.
     
    Biscuits, Apr 28, 2018
    #601
    Torspd[QUOTED], Roostfactor[OP] and Lucario Runner[QUOTED] like this.
  2. Apr 28, 2018 at 8:50 PM
    #602
    Biscuits

    #602
    Biscuits Thorny Crown of Entropy

    Joined:
    Aug 8, 2010
    Member:
    #41397
    Messages:
    15,577
    Gender:
    Male
    Swiggity swangin' biggity bangin'
    Must resist making Subway/Jered jokes...
     
    Biscuits, Apr 28, 2018
    #602
    Roostfactor[OP] and Lucario Runner[QUOTED] like this.
  3. Apr 28, 2018 at 8:58 PM
    #603
    Roostfactor

    #603
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Just have another one of your fancy bottomless glasses of primo distilleryness and the shell will break!
     
    Roostfactor, Apr 28, 2018
    #603
    Biscuits[QUOTED] likes this.
  4. Apr 28, 2018 at 9:12 PM
    #604
    Biscuits

    #604
    Biscuits Thorny Crown of Entropy

    Joined:
    Aug 8, 2010
    Member:
    #41397
    Messages:
    15,577
    Gender:
    Male
    Swiggity swangin' biggity bangin'
    Biscuits, Apr 28, 2018
    #604
    Roostfactor[QUOTED][OP] likes this.
  5. Apr 28, 2018 at 9:17 PM
    #605
    ThomasMore66

    #605
    ThomasMore66 We can't stop here, this is bat country!

    Joined:
    Feb 9, 2013
    Member:
    #97155
    Messages:
    7,290
    Gender:
    Male
    Dallas/Fort Worth & Durango
    Vehicle:
    Supercharged 2013 TRD Offroad 4wd
    TRD Supercharger, TRD exhaust, Leather seats, running boards removed (why it came with them I cannot imagine), Salex organizers, BAMF behind-the-grill light bar, Rigid SR-20 and SR-Q - Spots mounted behind stock grill, color-matched grill, WeatherTech FloorLiner DigitalFit floor mats, Tech Deck, Avid bolt-on slider/step converted to weld on by TW member Achirdo, Diaz Fabrication Model T, Icon Stage 4 with OME Dakar rear leaf springs, OME Driveshaft spacer, Toytec 1" Front Diff Drop, FN BFD 18"x9" GMG Wheels, BFG KO2 285-65-18 tires, Ultragauge mounted above mirror, Tuffy Box lockable storage, MattGecko rear window security bar, Relentless Fab tailgate protector, CSJumper 700 lumen flood pattern back-up LED's, modified BeeRadd under-hood lighting with two KC Cyclones; KB Voodoo cargo management system and standard rails, AllPro hi-lift jack mount, 48" hi-lift, RCI Metalworks aluminum front skid, Flyzeye 3VP-RS in glovebox and console, AFE CAI, Coupe fuse box cover, battery hold-down bracket and CAI air-box cover, Wurton pod led's installed as bed lights on Lowbrow Customs motorcycle fork brake line aluminum brackets, Pop-n-Lock PL5400, Extang Solidfold 2.0, Rechelon Retro's, Moromoto LED fogs, URD Y-pipe, Walbro 255lph fuel pump, Speedhut AFR and Boost gauges, Cravenspeed gauge holder, CMC by Tandem Automotive, 70mm throttle body, CSF radiator, Doug Thorley shorties, Vibrant 7101 cats, SOS Offroad front and rear bumpers, Smoothflow 2.5” SC pulley, Steeda SC belt tensioner, roostfactor belt wrap kit, switch Pro 9100 in custom Tandem Automotive holder, IPT overhauled transmission, FIC 650cc injectors, HP Tuner, entire engine overhauled by Engineered Performance, Alvarado, TX.
    ThomasMore66, Apr 28, 2018
    #605
    Biscuits[QUOTED] likes this.
  6. Apr 28, 2018 at 9:24 PM
    #606
    Biscuits

    #606
    Biscuits Thorny Crown of Entropy

    Joined:
    Aug 8, 2010
    Member:
    #41397
    Messages:
    15,577
    Gender:
    Male
    Swiggity swangin' biggity bangin'
    [​IMG]
     
    Biscuits, Apr 28, 2018
    #606
    Roostfactor[OP], Torspd and White lightning boosted like this.
  7. Apr 28, 2018 at 9:36 PM
    #607
    Roostfactor

    #607
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Roostfactor, Apr 28, 2018
    #607
    Biscuits[QUOTED] likes this.
  8. Apr 28, 2018 at 9:56 PM
    #608
    Biscuits

    #608
    Biscuits Thorny Crown of Entropy

    Joined:
    Aug 8, 2010
    Member:
    #41397
    Messages:
    15,577
    Gender:
    Male
    Swiggity swangin' biggity bangin'
    Different strokes for different folks, my friend. Nothing to do with taste. Ain't nothing wrong with that.
     
    Biscuits, Apr 28, 2018
    #608
    Roostfactor[QUOTED][OP] likes this.
  9. Apr 28, 2018 at 9:56 PM
    #609
    ThomasMore66

    #609
    ThomasMore66 We can't stop here, this is bat country!

    Joined:
    Feb 9, 2013
    Member:
    #97155
    Messages:
    7,290
    Gender:
    Male
    Dallas/Fort Worth & Durango
    Vehicle:
    Supercharged 2013 TRD Offroad 4wd
    TRD Supercharger, TRD exhaust, Leather seats, running boards removed (why it came with them I cannot imagine), Salex organizers, BAMF behind-the-grill light bar, Rigid SR-20 and SR-Q - Spots mounted behind stock grill, color-matched grill, WeatherTech FloorLiner DigitalFit floor mats, Tech Deck, Avid bolt-on slider/step converted to weld on by TW member Achirdo, Diaz Fabrication Model T, Icon Stage 4 with OME Dakar rear leaf springs, OME Driveshaft spacer, Toytec 1" Front Diff Drop, FN BFD 18"x9" GMG Wheels, BFG KO2 285-65-18 tires, Ultragauge mounted above mirror, Tuffy Box lockable storage, MattGecko rear window security bar, Relentless Fab tailgate protector, CSJumper 700 lumen flood pattern back-up LED's, modified BeeRadd under-hood lighting with two KC Cyclones; KB Voodoo cargo management system and standard rails, AllPro hi-lift jack mount, 48" hi-lift, RCI Metalworks aluminum front skid, Flyzeye 3VP-RS in glovebox and console, AFE CAI, Coupe fuse box cover, battery hold-down bracket and CAI air-box cover, Wurton pod led's installed as bed lights on Lowbrow Customs motorcycle fork brake line aluminum brackets, Pop-n-Lock PL5400, Extang Solidfold 2.0, Rechelon Retro's, Moromoto LED fogs, URD Y-pipe, Walbro 255lph fuel pump, Speedhut AFR and Boost gauges, Cravenspeed gauge holder, CMC by Tandem Automotive, 70mm throttle body, CSF radiator, Doug Thorley shorties, Vibrant 7101 cats, SOS Offroad front and rear bumpers, Smoothflow 2.5” SC pulley, Steeda SC belt tensioner, roostfactor belt wrap kit, switch Pro 9100 in custom Tandem Automotive holder, IPT overhauled transmission, FIC 650cc injectors, HP Tuner, entire engine overhauled by Engineered Performance, Alvarado, TX.
    Kinda got a dark theme going there Edge Lord.
     
    ThomasMore66, Apr 28, 2018
    #609
    Roostfactor[OP] likes this.
  10. Apr 28, 2018 at 11:19 PM
    #610
    Torspd

    #610
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,446
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Like.
     
    Torspd, Apr 28, 2018
    #610
    Biscuits[QUOTED] and White lightning boosted like this.
  11. May 4, 2018 at 8:41 PM
    #611
    Murphinator

    #611
    Murphinator Well-Known Member

    Joined:
    Mar 1, 2015
    Member:
    #149903
    Messages:
    3,335
    Gender:
    Male
    First Name:
    Anthony
    SoCal
    Vehicle:
    14 DCSB 4x4
    Installing my stuff right now. Almost have everything back in. Only problem I ran into is the passengerside shroud mount didn’t line up right with the rad. I just cranked it in there, but it was definitely not going in straight. I was beyond the point of return. Also just broke the lower radiator hose clamp trying to slide it over the lip on the bottom of the rad. :pout:
     
    Murphinator, May 4, 2018
    #611
  12. May 4, 2018 at 8:45 PM
    #612
    Roostfactor

    #612
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Tacoma shroud or FJ?
    If it was the Tacoma shroud I have pics on the first post of how I re-drilled the upper shroud holes.
    Was is the stock clamp? They are spring loaded, dont know how it would break?
     
    Roostfactor, May 4, 2018
    #612
  13. May 4, 2018 at 9:24 PM
    #613
    Murphinator

    #613
    Murphinator Well-Known Member

    Joined:
    Mar 1, 2015
    Member:
    #149903
    Messages:
    3,335
    Gender:
    Male
    First Name:
    Anthony
    SoCal
    Vehicle:
    14 DCSB 4x4
    Fj shroud, sorry forgot to mention.
    So you know how there is two prongs on the clamp. It was stuck on the lip of the rad and when i tried to squeeze them one end went snap. I just out a hose clamp on the side closer to the rad of it since I couldn’t get it off.
     
    Murphinator, May 4, 2018
    #613
    loginfailed likes this.
  14. May 4, 2018 at 10:01 PM
    #614
    Roostfactor

    #614
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Understood. All good now Murph?
     
    Roostfactor, May 4, 2018
    #614
    Murphinator[QUOTED] likes this.
  15. May 4, 2018 at 10:21 PM
    #615
    Murphinator

    #615
    Murphinator Well-Known Member

    Joined:
    Mar 1, 2015
    Member:
    #149903
    Messages:
    3,335
    Gender:
    Male
    First Name:
    Anthony
    SoCal
    Vehicle:
    14 DCSB 4x4
    Just took it for a test drive. I can tell I am really going to like this radiator :D

    Bled the cooling system for 30 mins. I will add some trans fluid tomorrow maybe. It drives fine and I didn’t lose too much. I figure it wouldn’t hurt to top it off still.
    I added the weather stripping to all 4 sides. The top piece I could double up on or place lower, but everywhere else fits snug.

    As far as the trans hard line brackets, I could not bend the brackets by hand. I just grabbed the hard line and pulled them down a smidge. Easy enough.

    Thanks again to John and Dwayne for doing the leg work on making this install as easy as possible!
     
    Murphinator, May 4, 2018
    #615
    JuanitoBonito, loginfailed and SonnyBones like this.
  16. May 4, 2018 at 10:24 PM
    #616
    Roostfactor

    #616
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Yeah buddy! Enjoy!
     
    Roostfactor, May 4, 2018
    #616
    Murphinator[QUOTED] likes this.
  17. May 4, 2018 at 10:25 PM
    #617
    loginfailed

    #617
    loginfailed Well-Known Member

    Joined:
    Aug 29, 2016
    Member:
    #195923
    Messages:
    5,156
    Gender:
    Male
    First Name:
    Dwayne
    Houston, TX
    Vehicle:
    2014 DCSB 4WD
    The lower clamp on mine was a little fussy also.
     
    loginfailed, May 4, 2018
    #617
    Murphinator[QUOTED] likes this.
  18. May 4, 2018 at 10:30 PM
    #618
    Murphinator

    #618
    Murphinator Well-Known Member

    Joined:
    Mar 1, 2015
    Member:
    #149903
    Messages:
    3,335
    Gender:
    Male
    First Name:
    Anthony
    SoCal
    Vehicle:
    14 DCSB 4x4
    Yeah, I think my set of pliers may have been a little overkill. Especially since I managed to break it :p

    As far as the shroud bolt goes, I think all the long distance shipping it went through got the best of that one mount. No biggie tho I made it work. 10/10 would do again.
     
    Murphinator, May 4, 2018
    #618
    Roostfactor[OP] and loginfailed[QUOTED] like this.
  19. May 4, 2018 at 10:34 PM
    #619
    Roostfactor

    #619
    Roostfactor [OP] Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156609
    Messages:
    3,885
    Gender:
    Male
    First Name:
    John
    TX panhandle
    Vehicle:
    2015 DCSB OR Pyrite Mica
    HPT/justDSM tuned factory ecu, URD Headers, JFR Y-Pipe/l 3" exhaust, Walbro 255 fuel pump, Maggy SC (JFR ported), JFR ported lower intake manifold, 76mm tb, 2.5 pulley, 640cc injectors, CSF Radiator, custom electric fan wit Autocoolguy controller, JFR SC pulley wrap mod
    Like its owner? :boink:
     
    Roostfactor, May 4, 2018
    #619
    loginfailed[QUOTED] likes this.
  20. May 4, 2018 at 10:37 PM
    #620
    loginfailed

    #620
    loginfailed Well-Known Member

    Joined:
    Aug 29, 2016
    Member:
    #195923
    Messages:
    5,156
    Gender:
    Male
    First Name:
    Dwayne
    Houston, TX
    Vehicle:
    2014 DCSB 4WD
    It’s getting worse with age. The new neighbors that moved in behind me probably think I’m an asshole. But their dog doesn’t bark as much since the incident. :D
     
    loginfailed, May 4, 2018
    #620
    oni06 and Roostfactor[QUOTED][OP] like this.
Page 31 of 107

Products Discussed in

Hayden Automotive 678 Universal Rapid-Cool 9.5” x 11” Add-On Transmission Cooler – Not for Direct Replacement of the OE Cooler
$51.51
Lisle 24680 Spill-Free Funnel, Standard Adapters, 11 x 7 x 7"es
$35.32
ESUPPORT 315" 8Meter Big D Car Motor Auto Door Rubber Seal Strip Weatherstrip Seals Hollow
$17.29
MotoRad 456-160 Engine Coolant Thermostat for 8-Cylinder GM, Black
$19.01
Genuine Toyota Parts - Terminal, Repair W/W (82998-12440)
$12.31
HPS 57-1469-BLUE Silicone Heater Hose Kit Coolant
$148.00
Spectra Premium 98038 Vehicle HVAC Heater Core Replacement Compatible With 2005-2015 Toyota Tacoma L4 2.7L and V6 4.0L
$95.33
AISIN WPT-802 New Engine Water Pump with Gaskets - Compatible with Select Toyota 4Runner, FJ Cruiser, Tacoma, Tundra
$115.95
Gates 38411 DriveAlign Automatic Belt Drive Tensioner
$96.31
Flex-a-lite 678 S-blade Engine Cooling Fan with Controls for Toyota Tacoma 05-09 , Black
$598.97
Flex-a-lite 32084 1-3/4" ID In-Line Radiator Hose Adapter
$86.33
Dewhel Aluminum Black Water Temp Meter Temperature Gauge Joint Pipe Radiator Sensor Adaptor Clamps 36mm
$9.99
VGEBY Car Aluminum Water Temp Temperature Joint Pipe Sensor Gauge Radiator Hose Adapter Clamps 26-40MM (Size : 32MM) Radiator Hose Adapter 32Mm Water Temp Sensor Adapter Glowadapter
$10.06
ScanGauge - SG2 Ultra Compact 3-in-1 Automotive Computer with Customizable Real-Time Fuel Economy Digital Gauges for OBD2 Vehicles
$159.99
Spal Fan Harness With Relay (40 Amp)
$58.95
Spal 30100393 7.5" Straight Blade Low Profile Fan
$71.58
Denso 5346 Spark Plug
$16.00
To Top