Anything welding

Ah never thought of that!

 

@koditten

 

I have no complaints so far from my Vulcan Mig215 from cheapo freight.

 

I knew one was in your neat future.

 

Scrounge up a pound or two of 6013 it is not bad for thinner material and does pretty good with poor fit up (gaps)

Then it just might be not enough practice yet

 

I guess it comes down to just what is decent for you since you have been spoiled by a push pull system .

Look for something used bare bottom of the list Miller Millermatic 180 /140 with the spoolmate 100 ( Lincoln or Hobart as well)

It only gets more expensive from there

It will be like driving 500 horse power down to 100 in the same vehicle you will feel it is not working correct all the time

Just how much Aluminum do you have to weld ??

Rent what you need but for COD customers we charge a deposit 1/2 the cost of the equipment

 

That would take 3 lifetimes to use up. No thanks.

 

Cross member and frame plating for a very rusty 4runner. This will be bolted to what's left of the front frame, ank hopefully keep the skids on.

 

Everybody die in here?

 

I was able to make me a grab handle for my boat. Been stupid busy with house remodeling. I hate carpentry.

 

I love carpentry as long as it brings in moola. Been kicking around with more aluminum welding projects.

 

Still no welder? Wtf is Cyberweld doing?

 

Yeah, I was buried under my truck cutting and grinding. Welding skills will be put to the test soon.

 

More like a busy 3 weeks. Don' have time to work on it for more than 3 hrs at a time.

 

Agree 100%

 

Let me know when you get the hook up

 

Picked up this turd for $100. Needs only paint and fender welder back on (done).

 

Oddly enough, it wasn't mine. The previous owner left it there and it was in a position I couldn't grind it off. I'll take care of it when I paint.

 

Welding skills are definitely improving. These are 90 degree brackets I made to attach a top to the table I made.