Bskis OVL tabs. BS Approved

Just fet @ChandlerDOOM canopy/flatbed. You get best of both worlds. For the days you don't want a cap

 

And it holds the Rtt no worries? Should I be picky and go ARE?

 

So it’s a timing thing. I have the green light once I land this gig out west. If no land no Cap

 

When will you have an answer?

 

Probably by the end of May.

You know that dude PNWTACOMA on insta? He’s got a pretty rad cap I’ll tag you.

 

Just sent you type that’s attractive. @EatSleepTacos

 

mmmm, that's the perfect cap. Windoors AND they slide for air. I'd love that feature for if I ever wanted to sleep in the bed of my truck

 

Yea dude it’s epic. The other thing I thought was sell the bedslide and get some truck vault Drawer with slider on the one side. They make em weather proof and lockable so I could keep everything packed away

 

Dude you’re balling outta control! Those are so expensive

 

@inesshell might know him

 

They are out of hand I had one priced out 3,700!

 

Time for dinner over here. TBC

 

Frameless door is cool too!

Agree on windoors, i'd love to have some

 

Yupp no worries here.. I don’t even have the reinforced roof for the roof racks.


Bro sell the bed rack and buy that cap! Mine was $1500 new.

 

I’ll try and twist the wife’s arm. But I’m going to have to pause the purchase till I get things squared away. Also would have to order prinsu for the cap

 

Just out of curiosity why is the prinsu a have to. That would be an expensive RTT mount..

 

That’s a great point. A couple basic ass bars would do the trick just fine.

 

100% it’s a want... not a have to by any means.

 

This is just a after thought but would the prinsu distribute and hold the weight better than two Thule bars?

Or any basic ass bars

 

Haha very valid. I’m not exactly sure..

1. I’d say makes sense. And would have to add at minimum a positive weight distribution

2. I’d say maybe not. All the weight regardless of spreading still comes down upon the 4 feet mounted to cap. In the link sent for $500, it comes with mounting tracks that means the cap (if factory installed) is reinforced and the weight upon the feet would be spread throughout the rack.


I don’t have reinforcement in the cap or even cross bar mounting tracks. I made my own feet and cross bars and bolted them through the cap. I really wanted aluminum cross bars and feet, before Zack sold Prinsu to CBI I was in contact with him working out the mounting feet he offers in aluminum.. He said the aluminum wasn’t acting right and cracking at the bends. That’s when I went my own route. But the plan I had was to order the feet and weld a 1”x2” square tube to the feet for a strong cross bar with boltable feet. This would work as well with the cap linked. Order than bolt the Prinsu feet in the tracks, lay tubing on and mark for welding locations. Could even finish off the mod with some plastic plug ends like I did to make it so fresh and so clean clean.




Red - Welds
Yellow - Square toob cross bar