PrInSu Design Studio Roof Racks BS Thread

Nice! Thanks for posting the pics. How did you mount the Road Shower? Any special hardware?

 

I know where you were- when were you there? My last trip there was for 5 days April 4-8th. My RTT pic above was on day 1 in Kelso Dunes on our way to the park.

Nice setup- the water in it must get really hot, is there a way to mix cold with it?

 

I just used the clamps that came with the Road Shower. Added some felt pads In between the rack and the shower as well.

This pic was around the end of March.

The temp was around low to mid 90s one day. After we found a camp site later that evening the water was the perfect temp (around 90 F). I’m sure you can untwist the top and add cold water to cool it down. Haven’t had any reasons to do that yet.

 

Not going to be one due to how the roof has such little reinforcement last time I heard anything about it

 

I had the 1250 before the 2000 and found it didn't have enough useable shade. It would likely be perfect for what you want when you have the RTT open, less so alone. But it fits perfectly on a CabRack.

 

So what's the wait times on these right now?

 

Broke a bolt today... Can anyone help me with specifics the hardware and where to find it?

 

Next mod

 

Ordered a CapRac today.

 

https://www.tacomaworld.com/threads/alternate-hw-extras-etc-for-prinsu.498163/

 

How is everyone mounting hard cases, totes, bins, whatever you want to call them? Is there any brackets or other methods to where you can easily remove the case from the truck so you aren't having to unload everything from the top of the truck? I did see E02 bracket system, but they are pretty pricey.

 

If you want quick removal the rings that come with your rack and straps are your best bet. I have my case hard mounted with holes drilled in the bottom then sealed with silicone

 

Thanks for your reply. I didn't get any rings with my rack, but i am guessing you are referring to eye nuts?

 

Yes, those thingys.

 

I ordered my toprac from there yesturday and yeah the code still active

 

Has anyone mounted the @Baja Designs S8 40" light bar? Either I am missing something silly here or the factory S8 mounts don't work for mounting to the Prinsu. Any tips or recommended mounts?

 

Ordered a TopRac on April 25th, got a shipment notification today, supposed to be here tomorrow. Less than 2 weeks from order to delivery.

 

Taco, I had to drill some extra loader mounting holes to mount my ONYX 6 lightbar. I'll try to get you some pics later.

 

Here you go taco_pnw .
The BD mounting bracket is a little different. You have to remount the load bar lower and to the front.

 

thats what i was told before i ordered. Made order and all of a sudden expected delivery now 3-4 weeks. sigh