What Have You Done To Your 2nd Gen Tacoma Today?

@Yotamac did mine
@glorifiedwelder does them as well up in Newhall
@Shmellmopwho i know is slammed these days with his day job and slider orders.

 

Question: how does the plug stay in place with this IKA bracket.? Is it a form fit around the edges, and then captured on top somewhere? IKA website does not offer me any details. Thank you.

 

Yea he did my sliders so I prefer going to him and I know it’s Mother’s Day weekend too lol.

Newhalls a good drive— hmm I’ll have to look into @Yotamac!

 

I’m a little ways away from you. I do about 4-5 cmc’s a week. I also do the most aggressive cab mount chop.

 

Yotamac is over in Artesia

 

Shop says itll cost about 17 grand to fix the tacoma, think thats enough to total her?

 

What did you use? I'll hit mine with a rubbing compound every few weeks but it gets foggy again after about a month.

 

Question to the tw family. Got 265/75/16’s would like to set my bilstiein 5100’s up to accommodate the larger tire can you fine folks recommmend which setting you would put it at. I have 5100’s with ome Dakar leafs in the rear which makes the rear a bit higher then the front. I believe I have the front set at the 1.00 inch ring. I can’t remember now which is driving me crazy. Thanks everyone!

 

Not today by any means. Few months ago (been too long since I've been on TW) I finished my first real project on the taco. The new color matched BMF grill came out great. Painted the original Toyota emblem and fitted it to the mesh. Then added the TRD emblem and used epoxy to hold it all on. Gotta say I love the way it came out and it makes the truck look so much different!

 

Sounds funny.

Unfortunately no.

 

Stock

 

Le sigh. Needs a new frame new composite bed, new bedside new rear axle new drive shaft newrear passenger door.. new carrier bearing area, new leaf springs. Just off the top of my head

 

That's my thoughts exactly!

 

What headlights are those?

 

Neither actually! Rustoleum professional gloss white with aluminum primer and clear coat after. Bunch of guys on here said that rustoleum was the best match they have found for the super white.

 

Don't be afraid to pull it firmly. You won't break it. I had to remove it to install seat covers.

 

I finally got around to un-fcking the rat nest of wiring/loom for my DIY fuse box/relay mount


Before:



After:

 

Of course. I have a very very basic build thread on here somewhere lol

https://www.tacomaworld.com/threads/4x4taco09s-black-sand-pearl-dclb-build.444073/

 

Do you apply a UV protectant after?

 

I really need to clean up my wiring for my fuse panel...