Alabama thread!

I am about to try out 888s on my truck, so we will see how that goes.

 

It sits close to level doesnt it?

 

About an inch rake. Just about level with the rtt on

 

Ill have to keep an eye on when you do. I was about to try a 1/4 top spacer to see if it will get it up just a little bit more as my shocks already bang pretty bad with the 887s and going over speed bump so not really wanting more length there, although 5mm or whatever it is probably wouldnt hurt.

 

Yeah i have what looks more than that with a shell and 4 factoiry tires and wheels in back.

see. Not the best pic but you can see the large difference.

 

Don’t you have the Dakar heavy pack?

 

Yeah i bought them since i was planning on shell and towing. Maybe those are just intensifying the rake. They dont budge.

 

They are rated for a 600+ lb constant load. If you want a more level stance you can take a leaf out

 

My mom took my German shepherd to the vet to stay over night. She said she couldn't get up when she went by while I was at work.

Now my anxiety is high. I've taken this pup with me since before she was even weened from her mom.

 

If it’s too low and rubs just

 

Wouldn't want to be in this house the last weekend of November

 

Sweeeeeet

 

guys/gals

 

Not the rubbing it's the god awful rake. I like the rear height. I'm just gonna drive it and save for some coil overs then locking hub conversion. It never ends I suppose.

 

You sir are in the same boat I just came from. Buy once, cry once is the motto **** YOLO

 

Which coils are you running?! My preload is like 2" more on my kings!

 

I thought it would be enough without going adjustables it is. Just opened more issues with CV angles. I think I can get some more out of the front from 1/4 spacer maybe get me 1/2 inch. My CV fins surprisingly have good clearance and aren't touching static beight that I think I can squeeze a little more out of it.

 

I am at a full 2.5" in the front and my boots do not touch either, I think I can get a little more out of them once I raise the front to 3" for 35s.

 

I got my sliders and skids today
I’m really glad I went with the aluminum skids. They are much more solid that I expected. Coating on the sliders is nice. It has a sandpaper texture that will be good if someone wants to use it as a step.

 

Shit seriously?? These are only 600s. I’m about to go to 700s to get more height though and less sway